Although the recommended way of application is with a premium quality natural bristle brush, you can use a cloth or a rag to apply Minwax PolyShades. If you prefer spraying, PolyShades is also available in an aerosol can which makes it easy for you to spray the areas that are hard to reach with a brush.
Can you apply Minwax PolyShades with a cloth?
Coat soft, porous woods such as pine or alder with Minwax Pre-Stain Wood Conditioner by applying it with a brush or cloth. Allow it to dry for five to 15 minutes, and then use a dry cloth to remove the excess. Finish the surface with PolyShades within two hours of application of the Minwax conditioner.
What's the best way to apply Minwax PolyShades?
The best way to apply an even coat of Minwax® PolyShades® is to use the tip of a quality, natural bristle brush and brush on a thin coat, using long, smooth strokes.
Can you apply Poly stain with a rag?
Yes, you can apply polyurethane with a rag. Applying polyurethane with a rag is a good way to avoid paint bubbles, brush marks, and also helps you to paint hard-to-reach surfaces. There are many different ways to apply polyurethane, but the most common methods include spraying it or wiping it on with a rag.Sep 2, 2021
How do I get a smooth finish with PolyShades?
Work quickly as you apply PolyShades® the length of each board in smooth, even strokes. Use the tip of your brush to gently smooth out the finish. Always apply PolyShades® moving your brush back and forth in the direction of the wood grain.
How do you apply PolyShades?
1:372:36Minwax® | How to Use PolyShades - YouTubeYouTubeStart of suggested clipEnd of suggested clipMinutes wipe with a lint-free rag thoroughly stir your poly shades. And begin to apply a very thinMoreMinutes wipe with a lint-free rag thoroughly stir your poly shades. And begin to apply a very thin coat with the grain in smooth. Even strokes let it dry for six or more.
Do you sand PolyShades between coats?
This removes any start/stop marks and bubbles. Before applying the second coat, sand with the 220 fine grit sanding paper - very lightly! And then remove sanding dust and apply the second thin coat as you did the first coat. Additional coats can be added to deepen the color.May 7, 2013
What kind of rag do you use for Wipe on Poly?
Here's what I use when I apply wipe on poly to a finished piece of furniture: Minwax clear gloss wipe on poly. Minwax satin finish wipe on poly. White, lint-free cotton rags.
What kind of rag do you use for polyurethane?
Step 5: Pour your Wipe on Polyurethane in a clean, lint-free rag. You can also pour a small amount of wipe-on poly into another container to dip your rag. Then, start applying polyurethane on the wood in smooth and even brush strokes.Jan 27, 2022
Can you apply Minwax polyurethane with a rag?
Ease of application: Some Minwax® clear finishes can be easily applied with a cloth—no need to worry about drips or brush marks. Some dry very quickly and can be cleaned up with soap and water, while others require mineral spirits.
Can I wipe on Minwax PolyShades?
Yes. Since PolyShades® contains polyurethane, additional protection, without added color, can be provided with a clear coat of Minwax® Fast-Drying Polyurethane or Wipe-On Poly over the last coat of PolyShades®.Jan 14, 2020
Can I apply PolyShades with a roller?
Yes! You can use a roller to apply polyurethane (and definitely should) when working on floors and large furniture. Applying polyurethane using a roller is easier, and the drying time is short. The roller also removes brush marks and prevents over-application on the surface.Feb 17, 2022
Can you apply PolyShades with a foam roller?
0:161:50How to Apply Polyurethane with a Foam Roller - YouTubeYouTubeStart of suggested clipEnd of suggested clipOn the poly just like you would paint don't work the surface any more than you have to that justMoreOn the poly just like you would paint don't work the surface any more than you have to that just creates porn bubbles and keep the coats light the heavier you lay it on the more bubbles you'll get.