Yes, you can use Propress fittings on soft copper. The Propress fittings are designed to work with a wide range of materials, including both hard and soft copper. They are also compatible with other types of tubing, such as PEX and CPVC
Chlorinated polyvinyl chloride
Chlorinated polyvinyl chloride (CPVC) is a thermoplastic produced by chlorination of polyvinyl chloride (PVC) resin. Uses include hot and cold water pipes, and industrial liquid handling. Genova Products located in Michigan initially created the first CPVC tubing and fittings for Hot and Cold water distribution systems in the early 1960s.
Is ProPress better than solder plumbing fittings?
Compared to classic soldering, press fittings install faster, safer and easier. They do not require a torch or that the pipe be completely clean before fitting. The traditional fittings for soldering are lower cost, however, and reliably long-lasting when installed by experienced professionals. Your time is money.
What pressure is ProPress rated for?
What pressure is ProPress rated for? What pressure is ProPress rated for? In tests conducted by NSF International, joints made by the ProPress System have rated test pressures of 600 psi, and working pressures of 200 psi within an operating temperature range of 0° to 250° F.
Can ProPress be used on soft copper?
ProPress® and ProPress XL (Copper) are safe, reliable and economical copper pipe installation systems that use modern cold press connection technology. Viega® ProPress fittings are for use with type K, L and M hard copper tubing from ½" to 4" and soft copper tubing in ½" to 1¼" diameters.
What are the advantages of copper pipe fittings over plastic?
The top 5 reasons
- Press fittings save time and money. With press fittings, connections can be made in a fraction of the time that it takes to weld or solder pipe. ...
- Press fitting connections are secure. Press tool operations vary by brand, but one thing that is consistent is the strength of connections. ...
- Jobsite safety is improved with press fittings. ...
Can you use Viega ProPress on soft copper?
Viega ProPress may only be pressed onto copper tube in accordance with ASTM B88 or B75. When pressing onto B88 copper tube, types K, L, and M may be used. Tempers O60 and O50, known as soft copper, are limited to nominal sizes ½" to 1¼". Temper H58, known as hard copper, may be used with nominal sizes ½" to 4".
How do you connect soft copper pipes?
0:091:41Connecting PEX Tubing to Copper Pipe - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou will need to use a copper fitting adapter also known as a male sweat adapter this may be theMoreYou will need to use a copper fitting adapter also known as a male sweat adapter this may be the case if your copper pipe is connected to an elbow or other type of fitting.
Can you use push connect fittings on soft copper?
Push-Connect Joints Cut the length of soft copper tubing with the circular tubing cutter. Remove any ridges formed by the cut from the inner wall of the tubing with the reamer. Chamfer the end of the tubing with the chamfering tool.
Can you use pro Press on type M copper?
The propress works fine on Type M copper and up.
Will Sharkbites work on soft copper?
Can SharkBite fittings be used with soft copper or rolled copper? No. SharkBite fittings can only be used with hard drawn copper types K, L, and M.
Can you use soft copper for water?
Copper pipes are mainly used for supplying water. A pipe made of soft copper tends to bend easily even without using any tool. As such, pipes made of copper are also known as tubing. Pipes made of the hard type of copper are inflexible and require bending using special tools.
How do you cut soft copper?
0:241:46How to Cut Copper Pipes for a Refrigerator : Copper Pipes & FittingsYouTubeStart of suggested clipEnd of suggested clipSo on the backside of your cutter you should have a little tool that you can stick inside the end ofMoreSo on the backside of your cutter you should have a little tool that you can stick inside the end of your pipe. And start to bend that soft copper back out and regain its original shape.
Can you braze soft copper tubing?
If you choose to braze copper tube in a plumbing system, it is simply because you want a stronger joint. Soldering, as well as other joining methods, can handle the temperatures and pressures anticipated in typical plumbing systems. Follow the rules for brazing, using the newer shorter socket depth fittings.
Are SharkBite fittings reliable?
John Guest quick-connect and SharkBite fittings are both reliable and awesome fittings for emergency fixes. Even though Quick-Connect and SharkBite fittings are rated for use underground and behind walls, soldering pipes may be the smarter choice.
Is ProPress better than solder?
Unlike soldering, ProPress systems do not need an open flame to be completed. This creates a safer work environment and by not requiring a hot work permit, saves time. Another advantage over soldering, ProPress fittings can be installed without having to drain and dry the system beforehand.
Do ProPress fittings leak?
In general, Viega Propress fittings only leak due to one of three reasons; the fitting was never pressed, the copper tubing was not properly inserted or the pressing jaws were not properly aligned. If the fitting was never pressed, confirm that the tubing is properly installed and proceed with pressing.
What is the green dot on ProPress fittings?
A green dot on a Viega ProPress, MegaPress fitting indicates Smart Connect technology with an EPDM sealing element. A yellow dot on a Viega MegaPressG fitting indicates Smart Connect technology with an HNBR sealing element.