Yes an undermount sink can easily be converted to a drop in sink. If you can find one that is close to spec all that you have to do is drop it in and secure with silicone.
Full Answer
Is it hard to install an undermount sink?
Unlike drop-in sinks, undermount sinks attach to the underside of countertops, making them a little trickier to install. After you cut and fit the sink to the countertop, you will need to choose an installation method. Suspend the sink underneath the countertop if your countertop is already installed. If it isn’t, flip the countertop over to install the sink face down, quickly making the sink a sophisticated feature of your room.
How do you replace a pipe under a sink?
Things you Will Need
- Bye Bye Old Pipes The first phase in replacing a kitchen drain pipe is to remove the old piping. ...
- Replace Drain Pipe You are set to place your new pipes under the kitchen sink now that the old pipes are out of the line. ...
- Test
How to remove an undermount bathroom sink?
- Lay a 2 x 4 across the top of the sink parallel to the front of the cabinet.
- Wrap a length of 12-gauge wire seven or eight times around the 2 x 4 and extend it through the drain hole. ...
- Wrap the wire around a 6- to 8-inch length of 3/4-inch wooden dowel. ...
How to repaint your under sink cabinet?
Prepare to Paint Kitchen Cabinets
- Assess the Cabinet's Condition. Determine the condition of your cabinets. Surfaces that are already painted can be painted again if the existing paint is in good condition.
- Empty the Cabinets and Remove the Doors
- Remove Dirt and Grease, and Repair Damages
- Prep the Area and Sand
- Vacuum the Area. Applying primer is an important step in the painting process. ...
Can you change from undermount to drop in sink?
If you're replacing an undermount sink, you might have the option to choose between drop-in or an undermount sink. The only issue here is you might need to fill holes in the counter or redo some of the plumbing.
Can you replace an undermount sink without removing the countertop?
Simply put, yes, you can replace an undermount sink without having to remove the countertop. After the plumbing and garbage disposal are disconnected, the clips that hold the sink to the countertop from below must be removed. Then, the final step is to break the silicone adhesive bond and pull the sink out.
Can an undermount sink be replace with an Overmount sink?
Replacing an overmount sink with an undermount sink will hide the sink lip underneath a countertop and provide clean, modern lines.Sep 26, 2017
Which is better an undermount sink or a drop in sink?
Undermount sinks are good for homeowners seeking to highlight their solid-body counters with a sleek, modern look, with an eye on potential resale value. Drop-in sinks are better for those who love their traditional look, need to budget carefully, or have a laminate countertop.Nov 4, 2021
Can you replace an undermount sink without removing the granite?
Answered by Todd's Home Services: The short answer is yes it can be replaced. However, I do recommend having a granite contractor do the replacement. The adhesive used to hold the sinks under the top is very strong once adhered. It will likely have to be cut and ground out from the underside.Nov 24, 2020
Can you remove an undermount sink from granite?
Removing Undermount Sinks This will need to be dissolved or chipped away, either with a hand tool or an epoxy remover such as xylene, for which you need ventilation and a respirator. Sometimes, warns Crowley's Granite & Quartz, there's no alternative to chipping away part of the granite.Apr 2, 2022
Can you do an Overmount sink with granite?
Undermount Pros: Weight of sink easily supported by strong materials like granite or marble.Aug 25, 2015
Are drop-in sinks outdated?
Drop-in sinks represent a sink type that is affordable, flexible, and easy to install. But drop-in sinks do not have much in the way of resale value and are aesthetically outdated.Aug 30, 2020
What are the disadvantages of an undermount sink?
Here are a few cons of undermount sinks:They Require More Support. Sinks are heavy. ... Undermount Sinks Take Up Space. Although these sinks do not take up space above the counter, they do sit lower than drop-in sinks. ... They Are More Difficult to Replace.May 21, 2020
Can you use a drop-in sink with quartz countertop?
The drop-in sinks can fit in all solid surface countertops, including quartz and laminate.Sep 2, 2021
Where are undermount sinks installed?
Undermount sinks installed in a solid surface countertop are installed and adhered directly to the underside of the stone. Whereas, undermount sinks in a laminate countertop are adhered to the wood deck underneath the laminate covering (usually plywood) and the laminate is adhered over the sink. Therefore, if you have a laminate countertop ...
What is an undermount sink?
A How To Guide. An undermount sink, is a type of sink that is named because of its installation method. It is installed and secured underneath the countertop surface. Whereas, an inset sink is dropped into the pre-cut hole in the counter top and held in place by a lip that extends over the countertop surface.
What is the adhesive on the underside of a sink?
The rim of the sink is glued to the underside of the counter with a silicone adhesive, or sealant. This is what holds the sink in place in relation to the hole in the counter and is the main method of connection. As a back up to the adhesive, there are typically two metal clips bolted to the underside of the counter to further secure ...
How wide should a 30" sink be?
In other words, if you have 30″ sink you need a countertop that is at least 33″ inches wide. In most cases, this is only an issue with a smaller fixture you would find with a wet bar or a smaller bathroom.
Where is the sealant on a kitchen countertop?
The sealant is located in the small gap between edge of the countertop around the sink and the sink itself. Work your way around the sink slowly and apply steady pressure to ensure you cut as deeply through the sealant as possible. After cutting through the sealant, unscrew the metal clips underneath the countertop.
How wide is a bathroom sink?
However, most round bathroom sinks are roughly 16 to 20″ in diameter, and most rectangular bathroom sinks are 19 to 24″ inches wide. As a general rule of thumb the counter top you are installing the sink into needs to have at least an inch and a half of clearance on either side of the sink in order for the lip of the sink to attach properly.
What is the standard size of a kitchen sink?
Most kitchen sinks come in three standard sizes; 24″, 30″, and 33″. These measurements measure the width (the longest side) of the sink bowl or bowls. The most commonly used kitchen sink size is 30″ which will fit most kitchens in any style of home.
Can you use particle board under a sink?
You cannot have either of those materials with an undermount sink because the edges of the material that supports the countertop would be exposed, usually particle board or plywood. Which means, you are stuck with your drop in sink unless you are going to replace your countertops at the same time. If you are just going to replace your sink ...
Can you replace a drop in sink with an undermount sink?
Diva, can you replace a regular drop in countertop sink with an undermount sink? Sandy, the simple answer is no and here is why: An undermount sink is usually paired with solid surface countertop’s ( solid granite, quartz, Corian, etc). So if you have a drop in sink, most likely you have a laminate or tile countertop.
Can you mount a dish under the counter?
It's technically possible, most likely. However, since it's designed to be mounted under the counter, it probably won't have a finished flange, and you'll be looking at screws poking out around the edge every time you do dishes. There may be issues with creating a proper seal to avoid leaks. Avoid if at all possible.
Can you use a sink over a countertop?
It is supposed to be used under the countertops, not over. Most people will say that no, you cannot you it as an over-mount / drop-in style. Well, we broke the rules and made it work as an over-mount / drop-in style sink. We've has it two months and so far so good!
Can you use a porcelain sink as an overmount?
This sink CAN be used as an over-mount / drop-in. Yes, even though many people and internet forums say it's impossible, it's possible. Read ahead. >This beautiful porcelain painted sink is an under-mount sink. It is supposed to be used under the countertops, not over.
How does an undermount sink save space?
Undermount Sinks Save Countertop Space. With undermount sinks, the countertop extends all the way to the sink—even a bit more. If you're tight on room and need every possible square inch of counter real estate, undermount is the way to go. However, there is one type of drop-in sink that can save some counter space: the drainboard sink.
How many people are needed for undermount sink installation?
In some cases, two people are needed during the installation. Undermount sinks mount to the bottom of the countertop and are held in place by heavy-duty clips and caulk or a special adhesive. An undermount sink does have a rim, but the rim is not visible because it rests up against the bottom of the counter. The edge of the countertop along the ...
What is the gap between sink and counter?
One of the more frustrating things about undermount sinks is the gap at the top of the sink, where it joins up with the counter. While this gap is filled with a bead of silicone caulk, it's usually not filled flush to the surface. A depression remains, and this naturally becomes a magnet for food buildup.
What is a drop in sink?
Drop-in sinks, also called self-rimming or top-mount, are still the most common type of kitchen sink. A drop-in sink has a visible lip around its perimeter that rests flat on the countertop. The sink basin drops straight into the countertop cut-out, and the perimeter lip holds everything in place. Drop-in sinks are secured by hidden metal clips ...
How far does a drop in sink extend?
This has an integrated drainboard and/or food prep area that extends 8 to 10 inches beyond the side of the sink basin.
Can you use laminate undermount sinks?
Undermount sinks typically are recommended for all countertop materials except laminate (they can also be problematic with custom tile countertops). The laminate isn't the issue; it's the underlying base of particleboard or MDF . MDF does not hold clip fasteners well, and it is highly vulnerable to moisture damage. It’s possible to cover the sink-hole edge with laminate to protect the MDF core, but the seal between the sink and the laminate must be flawless to keep water away from the MDF.
Can you swipe food off the counter?
Because there is no lip to form an obstruction around the sink, you can swipe food particles directly off the counter and into the sink. Some drop-in sinks have lower-profile rims than others, making it easier to swipe from the counter into the sink, but it’s still nothing like the seamless undermount experience.
Why is my undermount sink jagged?
Most likely, it's jagged and uneven because the lip of the top mount sink will cover it up. Whereas, with the undermount sink requires it to be polished smooth and have straight lines because that's going to be part of the finished look.
Can you use a Silgranite sink instead of stainless steel?
You also may want to consider using a Silgranite sink instead of a stainless steel one. This is becoming more and more popular per our granite installer. They are made from a composite granite and polymer mix, and do not scratch like stainless steel, and can match your counter in color.
What is the difference between an undermount and an overmount sink?
overmount sink all comes down to the way it is installed. One is installed from below the surface of the counter (undermount), while the other is dropped into place from above (overmount).
What is a top mount sink?
Top mount sinks are versatile and come with single and double bowls (and even triple!) They are easy to install since they just drop into place from above the counter. Overmount sinks are cost-effective, both upfront and for installation.
What are the drawbacks of top mount sinks?
Most homeowners agree that the main drawback of top mounting a sink is the lack of a “seamless” look since the sink’s rim is visible. Here are a few more cons to consider before choosing a top-mounted sink: Top mount sinks require heavy countertops since they rest on the surface.
Is it easier to clean undermount or top mount?
Undermount sinks are without a doubt easier to keep clean. Top mount sinks have a rim that sits above the counter surface, so it’s not as easy to wipe countertop messes directly into the sink.
Can you clean undermount kitchen sinks?
Without a sink edge, it’s easy to wipe messes directly into undermount kitchen sinks. Undermount sinks are best for deeper cleaning of large pots and pans. But just like anything in the world of plumbing, under mounting a sink also has its cons, including:
Is there a right or wrong answer to the question "undermount or overmount"?
There’s no right or wrong answer to the “undermount or overmount?” question. Before you make your purchase, just be sure to weigh the pros and cons of each and compare the key differences between the two.
Can you replace an undermount sink with a drop in sink?
Yep, just as it’s possible to replace an undermount sink with the drop-in style, you can do the same the other way around. Just pay close attention to the sink dimensions - it’s vital that you find a sink to match the hole that’s already in your countertop so that you don’t have to make any major alterations.
