Can DensShield be used in a shower?
DensShield® Tile Backer is ideal for bathrooms, showers, floors, kitchens and other wet, high humidity areas.
What is the difference between DensGlass and DensShield?
2:3117:53DensShield vs Drywall: What's the Difference? - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo much different material. And you can hear that if you tap on it it sounds pretty dense if I tapMoreSo much different material. And you can hear that if you tap on it it sounds pretty dense if I tap on the drywall. It sounds a little more Hollow.
Is DensGlass water resistant?
DensGlass Sheathing integrates a water-resistant, treated core with a fiberglass mat face and back to provide superb protection from the elements. A water-resistive barrier is not required over DensGlass Sheathing to provide for the protection of the gypsum sheathing during installation.
What is the best backer board for showers?
Cement board is a good, reliable backer board that works well on both floors and walls. Keep in mind that most tile setters err on the side of caution and brush a waterproofing membrane on top of cement board when it is in wet areas like showers or tub surrounds.
Is DensShield mold resistant?
DensShield® Tile Backer has the highest level of performance for mold resistance under the ASTM D3273 test method.
How do you install shower DensShield?
4:156:30GP DensShield Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you don't exceed the manufacturers recommended open time but boards tightly together making sureMoreSo you don't exceed the manufacturers recommended open time but boards tightly together making sure to offset the joints between dent shield panels from the joints in your subfloor.
Do you need plywood under DensGlass?
It all depends on your expectations and plans. The sheathing is a barrier protecting your home from different weather conditions, and it is considered additional insulation in certain cases. Let's go ahead and introduce both Densglass sheathing and plywood so you can make a choice.
How do you seal DensGlass?
0:473:38Preparing Gypum Sheathing for a Spray Application of Fluid Applied WBYouTubeStart of suggested clipEnd of suggested clipPretreat any holes in the sheathing that completely penetrate the wall. You can use Tyvek fluidMorePretreat any holes in the sheathing that completely penetrate the wall. You can use Tyvek fluid applied flashing. And joint compound to treat the holes screw heads do not need to be treated.
Do you need a vapor barrier over DensGlass?
It is not required to provide a water-resistive barrier over DensGlass Sheathing for the protection of the gypsum sheathing itself during the 12-month weather exposure limited warranty.
What kind of board do you use for shower walls?
cement boardIn showers, the standard substrate is tile backer, also called cement board or cement backer board.
What is the best material to use behind shower walls?
acrylicWe recommend acrylic as the best shower wall material. Acrylic is the best system to use for shower walls because it is the safest, least high maintenance, and easy to install, meaning your shower could be done in as little as one day.
Can you use green board for shower walls?
Green board can be used for showers, but it must have a waterproof membrane installed on top of it to make it waterproof. It's best to use waterproof board for shower walls instead of drywall. Use green board for ceilings and non-shower walls in your bathroom.
Why is Densglass not used?
The reason that the material is not used in many instances is that homeowners do not recognize its existence, and builders are hesitant to recommend the product due to cost. Densglass is excellent in the interior of the residential unit, in place of water or mold resistant sheetrock.
What is densglass sheathing?
Densglass sheathing consists of a fiberglass surface and makeup that repels water, moisture, mold and deterioration , that is common if standard gypsum sheathing is used. For example I am presently using densglass sheathing on the tub side on all units being framed in a large residential structure.
Why is sheathing not used in residential construction?
Although this type of sheathing is commonly used in the commercial construction industry, it is not as commonly used in individual residential construction, due to its relatively higher cost, in relation to normal sheetrock. The common home owner is not as well versed in the benefits of this type of sheathing on their homes.
Is fiberglass densglass sheathing water resistant?
Whether there is masonry, wood, or even a synthetic exterior façade the use of a fiberglass densglass sheathing will provide a stable and water resistant sheathing, which can be left to the elements almost indefinitely. When the word indefinitely is used, it is meant to mean in a “best practice “situation.
What is Densglass Made Of?
Densglass is made from recycled glass. The material is manufactured using a process called molten-in place recycling. This process uses an induction furnace to melt the glass together. Because it has been melted twice, the insulation’s density and strength are greatly increased over traditional fiberglass insulation products
What Types of Densglass Sheathing are There?
There are several types of dens glass sheathing including the following:
Benefits of Using Densglass Sheathing
This type of insulation is made from recycled glass. It can provide an R-value of up to 12 per inch. Therefore, this product has very good thermal performance. It also provides moisture resistance and sound dampening abilities making it suitable for use indoors or outdoors in various applications.
Frequently Asked Questions
Yes. Densglass sheathing can be plastered over to create a smooth surface for interior or exterior applications which is necessary before painting, applying stucco or siding materials.
Applications That Are Not Recommended for Densglass Sheathing
Densglass is an excellent type of insulation to incorporate into your home but it’s not suitable for all applications.
Conclusion
Densglass sheathing is an excellent type of insulation to consider adding to your home whether you are looking for increased energy efficiency or protection from the elements. This type of insulation has been manufactured using recycled glass. It also offers many benefits including cost-effectiveness, corrosion resistance, and durability.
What is a denshield tile backer?
Tile Backer has a long history of successful performance, with hundreds of millions of square feet installed. DensShield Tile Backer is a substrate that, when properly installed, resists the effects of water or moisture, making it excellent for protecting both tile installations and stud cavities. DensShield Tile Backer is composed of a water-resistant treated core that is covered front and back with figerglass mats. The coated fiberglass mats are permanently integrated with the core during manufacturing to help prevent delamination problems. On the face side of DensShield Tile Backer is a heat-cured acrylic coating which stops moisture at the surface and retards vapor transmission, protecting the wall cavity and floor substrate from moisture intrusion. Unlike cementitious backer boards, DensShield Tile Backer does not require an additional moisture barrier.
Can you use Densshield tile backer on a wall?
DensShield® Tile Backer can be installed as a baseboard for a traditional reinforced floated wall tile system attached to the framing. DensShield Tile Backer panels may be hung either vertically or horizontally for wall applications.
