Command strips are very powerful and can easily hold curtain rods. Command Strips, or Command Hooks, are a product that most people use in their homes and we’ve also seen them used in patios and in many business properties.
How to hang curtains using command hooks?
Part 2 Part 2 of 2: Hanging the Curtains Download Article
- Lift your curtains from the top. Lifting from the bottom or middle will cause the curtain to ruffle and hooks could fall out.
- Loop the hooks into the rod links. The links on the curtain rod should have holes or attachments for you to put the hooks through.
- Release the curtains slowly. ...
- Check to make sure every hook is fastened. ...
- Test your curtains. ...
How to hang curtains correctly the first time?
What You Need
- Curtain rod with brackets
- Screws
- Tape measure
- Level
- Screwdriver
- Pencil
- Wall anchors (optional)
What is the easiest way to hang curtains?
Part 3 Part 3 of 3: Adding Your Curtains Download Article
- Remove your rod to hang the curtains. Once you're certain that your brackets can hold your rod, remove it to attach your curtains.
- Add the curtains onto the rod. Some curtains are attached to the rod by curtain rings while others are threaded directly through the rod.
- Put the rod back into place. ...
How to hang curtains without drilling holes?
Method 2 Method 2 of 2: Setting Up a Tension Rod Download Article
- Measure from one side of the window to the other. ...
- Buy a tension rod that will fit inside your window. ...
- Adjust the tension rod so it's slightly longer than the width of your window. ...
- Insert the rod into the window frame and mark where each end is. ...
- Take down the rod and hang your curtains on it. ...
- Hang up the tension rod and curtains. ...
What are command strips?
What are command strips? They’re actually known as hooks that are often used to hold up the light fixtures, curtain rods, shower curtain liners, and many other stuffs.
How much weight can a command strip hold?
Yes! The large command strip can hold up to 16 pounds, and depending on the width of your rod, that should be more than enough.
What is the best way to hang a large mirror?
Command strips are the most preferred option for hanging large mirrors or frames.
Is command strip easy to use?
But while it is fast and easy to use, the strength of the command strips should be taken into consideration, especially when installing heavy items on the wall.
Can you slide a curtain on a curtain rod?
This way, you can slide the curtain on any part of the curtain rod and the hooks will hold the curtain.
What to do if you can't find a curtain rod?
If you can't find any curtain rod Command hooks, purchase the largest size that you can find with the highest weight limit. The combined weight of the curtain and rod must not exceed the weight value of ONE hook, regardless of how many hooks are used. Make sure that the hook part is big enough for the rod.
How to hang a command hook on a wall?
Mark on the wall with a pencil where you want to place the Command hooks. Place the Command hook against the wall where you want it to go, then trace the top, bottom, and side edges with a pencil. Place all of the hooks 4 to 6 inches (10 to 15 cm) above the frame.
How to get paint off a hook?
Wipe the hook down with rubbing alcohol. This is very important because any oils will prevent the paint from sticking. It will also get rid of any sanding dust if you trimmed the hook down. Simply soak a cotton ball in rubbing alcohol, then wipe down the outside surface.
How long does it take for curtain rods to bond?
Give the hooks 1 hour to bond to the wall. During this time, the adhesive will bind to the wall. Don't get impatient and hang the curtain rod before the hour is up, or the hooks will fall off.
How to clean a window frame?
You don't need to wipe down the entire wall, just a rectangle that spans 4 to 6 inches (10 to 15 cm) above the frame, and 3 to 6 inches (7.6 to 15.2 cm) to either side of it. Use a soft cloth or paper towel soaked in rubbing alcohol to do this.
How to remove red liner from command hook?
Remove the red liner and press it against the back of the hook. Open your package of Command hooks, and find the adhesive strip. Find the side that is red, then peel that liner off. Once you have the liner off, press it against the back of the hook.
How to spray paint on newspaper?
If you are working with spray paint, be sure to paint on top of a sheet of newspaper in a well-ventilated area. Use a sweeping side-to-side motion.
How to hang a command hook?
Place the Command hook against the wall where you want it to go, then trace the top, bottom, and side edges with a pencil. Place all of the hooks 4 to 6 inches (10 to 15 cm) above the frame. Keep 2 hooks 3 to 6 inches (7.6 to 15.2 cm) outside the frame, and 1 hook in the middle to ensure central loading of the weight.
How much weight can a hanging strip hold?
The large strips can handle a 24-inch to 36-inch object that weighs up to 16 pounds. The smaller hanging strips can only handle up to 4 pounds.
How to use command strips on shades?
In order to use command strips for hanging shades, following the steps given below. Step 1: Wipe the surface clean with alcohol to clean off any dust or dirt. Don’t use any other cleaning substance, as that might leave residue on the surface that will prevent the command strip from sticking to it. Step 2: Peel off the cover on the adhesive side. ...
What are the benefits of command strips?
Benefits of Command Strip Blinds. There are a few benefits of using command strips. • Using command strips leave no lasting damage to your window frames. • Command strips work on painted wood, tiled walls, glass, drywall, and metallic surfaces. You can hang your blind on the window frame or on the wall beside it.
What is a command hook?
Command Hooks are also very popular with homeowners looking to hang shades. Command hooks are similar to command strips. Command hooks also use adhesive strips to attach to the wall.
How to get blinds up without screws?
One of the common methods of getting blinds up without drilling or screws is by using command strips.
How to attach a window cover to a wall?
Step 2: Peel off the cover on the a dhesive side. Be careful and keep your fingers away from the adhesive side. Step 3: Paste one on either side of the window and another on the middle. Wait for a while for the strip to attach itself to the wall. Preferably 30 seconds.
What is the best window treatment for heat loss?
Blinds are one of the most versatile, multi-functional, and affordable window treatment solutions out there. It is a one-stop solution for many problems – like heat-loss through windows, privacy and noise issues, along with heightened light control. For tenants, blinds are the best solution, as they need to spend very little to get ...
Why are command strips not stable?
The biggest problem associated with command strips is that they are not very stable and have a tendency to fall off. Another issue that comes with command strips is that while removing the strips, a bit of the plaster might come off. Most of the time the common problems associated with command strips are due to incorrect use.
How to use command strips on walls?
To stick the command strips on the walls you need to follow the steps as given below: 1 The surface where you are sticking the strips must be clean. They do not sit well on dirty surfaces. Clean the place with isopropyl alcohol. 2 Peel off the cover on the adhesive side taking care to prevent your fingers from getting stuck on the adhesive. 3 Now paste the strip on the side of the window and wait for a while to allow the strip to attach itself. 4 On the other side of the command strip apply a layer of powerful glue to ensure that the fabric sticks to the strips and can hold up. 5 For the fabric blind to hold up you also need to add a sufficient number of command strips. If you use fewer strips than required your blind will fall off. The command strips not only needs to support the weight of your blind but also the force applied when you are operating the blinds.
Why do you need command strips?
The command strips not only needs to support the weight of your blind but also the force applied when you are operating the blinds. If you are making your own blind, then command strips are a great way to mount them on to your windows as this too will not require any professional assistance.
How much weight can a command strip hold?
A large command strip can support up to 16 pounds while a smaller one can support up to 4 pounds. So you must be judicious in selecting the item you wish to hang using command strips. Command strips have become quite popular for mounting window blinds and shades. They have many advantages.
Can command strips be removed from walls?
Command strips can typically be removed from the wall with minimal damage.
Do window strips damage windows?
These strips, unlike drills, leave no lasting damage or impact on your window frames.
Can you drill command strips on fabric blinds?
However, if drilling is not an option at all then command strips work well for a short period of time. Additional glue or adhesive may be required to stick the command strips to a fabric.