As a guideline, you will want your bedside table height to be the same or a few inches taller than your mattress. Most mattresses are about 25 inches high, and most nightstands range from 24 to 28 inches tall, depending on the manufacturer. How to Measure for a Nightstand
How to choose a bedside table for your bed?
Take a measuring tape and measure the bed’s height from the floor to the top of the mattress. Then, choose a bedside table within 3 inches of that number. Some bedframes increase the mattress height significantly, but your bed might be lower to the ground if you have a platform bed.
What are the disadvantages of a high bedside table?
A bedside table that is too high, towering above you when lying in bed will not only look all wrong but will also make it extremely hard to reach your glass of water or bedside reading material.
Why are bedside tables so important?
Although it is the bed that, quite rightly, takes centre stage in any bedroom, don’t underestimate the importance of choosing the right bedside tables for the room. Although they often tend to be something of an afterthought, bedside tables not only add to the overall décor of the bedroom, but they also play a hugely practical role.
What size bedside table goes with a King Size Bed?
As a rough guide, king size beds tend to look best paired with bedside tables that are between 20” and 40” wide. Common mistake: tables that are too skimpy.
Are bedside tables lower than the bed?
The best height for a bedside table is one that sits at the same height as the top of your mattress thus meaning your lamp and bedside table ephemera sits at easy reach when you are lounging in bed and also that your visual aesthetic flow remains intact.
Can a nightstand be shorter than the bed?
RULE: Keep your nightstand in the scale with your bed. The average nightstand is 20″x20″ which will work for most beds. However, for larger beds (like a King) you can use a larger nightstand (up to 40″) and smaller beds (like twins) maybe go a little smaller.
Can nightstands be different heights?
And, while many people opt for matching nightstands, that's not absolutely necessary. That's the traditional approach, yes—but as with all design traditions, rules are meant to be broken! So you can definitely have two nightstands of differing sizes, shapes, finishes and even heights.
How high is a bedside table?
between 24 and 30 inchesThe average height of nightstands on the market today is between 24 and 30 inches. Beds average approximately 25 inches from the floor to top of the mattress. A nightstand should not be more than 5″ higher or lower than the top of the mattress.
How high should a bed be when lying down?
It is typically easier to reach up from a bed when lying down, rather than down. When standing up, a table level of 27 inches or more alleviates the need for stooping to reach items. Regardless of whether you go high or low, keep the range within six inches of your mattress height.
How high should a nightstand be?
Most nightstands available on the market range between 24 and 28 inches high. This corresponds with the most common bed height of 25 inches from mattress to floor. Make it easy to reach your bedside lamp, books, drinks and alarm clock by purchasing a table that stands a couple of inches above your mattress height.
Is a bed frame adjustable?
Most bed frames are adjustable, making it easy to customize according to your needs. Style Studio: 10 Tips for Picking the Perfect Nightstand. Wendy K. Leigh is a travel writer and photojournalist from Seattle. She is the Editor of Islands America, a travel website for visiting islands within the United States.
Should the nightstand be lower or higher than a bed?
It is best to keep your nightstand a bit higher than your bed. The nightstand should be about 2′-4’/6′ taller than the mattress of the bed. It makes it easier to reach the top of the nightstand and grab anything. Reaching below while laying on the bed can be uncomfortable and inconvenient.
When should the nightstand be lower than a bed?
It is an unsaid rule that the nightstand beside your bed should be higher than the height of the bed. But in case the nightstand looks good next to the bed and goes with the overall decor, then the low height can be considered.
When should the nightstand be higher than a bed?
One of the basics of decor design is to keep the nightstand a bit higher than the bed or the tip of the mattress. This will give you a comfortable position to grab things from the table.
Should a nightstand be taller, shorter, or same height as a mattress?
It is advised to keep the nightstand taller than the mattress of the bed.
What is the standard height for a nightstand?
The standard height of a nightstand is 24 to 28 inches considering the height of the mattress of 25 inches. It is not too lower than the mattress tip, and a bit higher for comfort.
Are end tables and nightstands the same height?
In general, the height of end tables and nightstands are the same. The standard size of the two decor pieces of furniture are the same, which is 25 inches.
Why are nightstands so short?
Nightstands are simple and short pieces of furniture to keep lamps, clocks and other small things. The table like furniture is placed beside your bed and should not take much room. This is why the nightstands are short.
Height of nightstand in relation to mattress?
We purchased a new king bed/mattress last year, and the bedroom is still a work in progress (right now I have 50 Shades of Gray on my walls and can't pick one, but that is another thread).
Comments (27)
I like my side tables by the bed to be high. We have a bed riser on our bed that raises it to 31", and the chest beside me is 33" high. Very convenient, and it settles the bed in. I think most night stands are way too small and low.
