Bruce hardwood floors are reliable and durable floor products for your home. When the finish of Bruce hardwood floors becomes worn, you can restore it by refinishing the flooring yourself. By sanding the old finish off and applying a new finish, your Bruce hardwood floor will look like new.
Full Answer
How to clean engineered hardwood floors by Bruce?
- Clean the floor with a vacuum that has a soft brush bottom.
- Fill in small gouges with a Bruce Touch-Up Kit filler stick.
- Wait for the filler material to dry.
- Sand the dried filler down flush with the floor's surface.
- Pour Bruce Fresh Finish into a 5-gallon bucket.
- Mop the entire floor.
- Tip.
How to maintain Bruce hardwood floors?
Prevent and protect.
- Don’t let spills sit. Wipe ’em up immediately. ...
- Mats and rugs are a floor’s best friend. Stop dirt and moisture in its tracks, with a natural or colorfast mat at your exterior doors. ...
- Trim your pet’s nails. ...
- Use protectors on furniture legs. ...
- Leave your shoes at the door. ...
- Minimize direct sunlight. ...
Should I refinish hardwood floors before selling?
Should You Refinish or Replace Your Hardwood Floors?
- Structural Damage. Although a home’s structural damage doesn’t always directly impact your flooring, the process of repairing the structure will!
- Movement & Gapping. Oftentimes with older homes you can find significant gapping in between floor planks. ...
- Aesthetic Changes. ...
How much does Bruce hardwood flooring cost?
Pricing for Bruce hardwood floor varies based on many factors: the type of flooring you select, the square footage of your rooms and optional features like trim and moldings. Bruce engineered floors typically cost $4 to $6 per square foot, not including installation. Bruce solid wood floors start at about $5 per square foot, not including installation.
Can I refinish my Bruce hardwood floors?
When the finish of Bruce hardwood floors becomes worn, you can restore it by refinishing the flooring yourself. By sanding the old finish off and applying a new finish, your Bruce hardwood floor will look like new. Refinishing Bruce hardwood floors will revitalize the look of your home.
Can you sand Bruce engineered hardwood floors?
If your new floor has a wear layer thinner than two millimeters, it may not be ideal for sanding. However, floors with a wear layer two millimeters or thicker respond well to sanding. Whenever you sand your engineered hardwood flooring, ensure you use caution to prevent sanding through your floor's wear layer.
Can prefinished hardwood floors be refinished?
Pre-finished hardwoods can be sanded and refinished. We do it all the time! Most of the pre-finished flooring has a bevel in between each board. That bevel can be sanded flat, if you choose.
What finish is used on Bruce hardwood floors?
urethane top coatProduct Description. Refresh your residential Armstrong, Bruce, or Robbins hardwood floors with quick drying Bruce Fresh Finish, 32-oz, urethane top coat floor polish. Bruce Fresh Finish coats and protects urethane finished floors by adding a protective layer that rejuvenated dull hardwoods.
Can Bruce hardwood be sanded?
0:374:33Refinishing Beveled Hardwood Floors - Sanding Prefinished - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn starting the finisher works the floor on a 45 degree angle. This is also an effective method ofMoreIn starting the finisher works the floor on a 45 degree angle. This is also an effective method of flattening out the area as pre finished hardwoods do have some vertical height differences.
Can you change the color of engineered wood floors?
When it comes to how to change the color of your engineered hardwood floor, sanding and refinishing is by far the most popular method. Sanding removes the existing finish, creating a fresh start for your new color. Take care to sand only engineered hardwood floors that have a thick enough veneer layer.
How do you change the color of prefinished hardwood floors?
0:141:41CHANGING THE COLOR OF HARDWOOD FLOORS! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAfter spending about five minutes standing on the stain out I just finally picked the color andMoreAfter spending about five minutes standing on the stain out I just finally picked the color and decided to go with it so this is the stain that I use I did apply about two coats of this stain.
How do you refresh prefinished hardwood floors?
0:3414:02How to Refinish a Wood Floor Without Sanding (under 1 hour) - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first thing you need to do is rough off the surface of the floor or slightly key it what youMoreThe first thing you need to do is rough off the surface of the floor or slightly key it what you need is a 120 grit bit of sandpaper. I'm going to be using a buffer.
Can you polyurethane over prefinished hardwood flooring?
A: Yes, a polyurethane-finished hardwood can be recoated if you take the proper steps to prep the finish. First, lightly sand with No. 2 steel wool or a dull 120- to 150-grit abrasive screen using a heavy floor buffer.
How do you clean Bruce engineered hardwood floors?
Regularly clean up dirt and dust with a broom, dust mop or your vacuum's wand attachment. For spills or spots, spray product and wipe up with a damp cloth or terrycloth swivel-head mop. For large areas, mist on product then wipe clean and dry with a swivel-head mop or soft towel. We do not recommend mopping with water.
What is the most popular hardwood floor finish?
The satin sheen is the most popular finish for hardwood floors. This hardwood floor sheen has about 40% luster and is easy to keep clean. This level of sheen disperses light and doesn't show all of the imperfections or dirt.
What is the most durable wood floor finish?
PolyurethanePolyurethane is actually the most durable hardwood floor finish.
What is prefinished hardwood?
Prefinished hardwood is stained and finished at the factory under carefully controlled conditions, which provides a more consistent appearance and superior durability. Prefinished floors allow you to enjoy your new floor much sooner, without the dust, noise, and time spent waiting for finishes to be applied and cured.
How can I protect hardwood floors from scratches?
How can I protect my hardwood floor from scratches? We suggest using floor protectors on the feet of furniture and chairs, area rugs in high traffic zones and door mats by any exterior doorways to help prevent scratches on your hardwood flooring.
Why are jute backed rugs not recommended?
Jute-backed rugs are not recommended because jute is very abrasive and will scratch the surface of hardwood floors.
What is the difference between engineered hardwood and solid hardwood?
What is the difference between solid hardwood and engineered hardwood? A solid hardwood board is milled from one piece of wood and is typically 3/4" thick (although some come in 5/16" thickness). These products can only be installed on or above ground.
Why do you need a humidifier for hardwood floors?
During dry seasons, a humidifier is recommended to prevent excessive shrinkage in hardwood floors due to low humidity levels. During wet seasons, proper humidity levels can be maintained by use of an air conditioner or dehumidifier.
Can you refinish solid hardwood?
A major benefit of solid hardwood is it can typically be sanded or refinished more than one time. It must be installed with nails, staples or glue. An engineered hardwood floor is made up of layers (plies) of real wood that are adhered together to make the board more structurally stable than solid hardwood.
Can engineered hardwood be refinished?
Refer to the warranty for your floor to determine the feasibility of being refinished. A benefit of engineered hardwood is that it can be installed on any level, even in basements, and typically has multiple choices for installation, such as floating, gluing or nailing/stapling down.
Is 2 1/4 solid oak good?
You will always be able to find it if needed - the unfinished oak doesn't get discontinued like other flooring.
Does Bruce Flooring discontinue hardwood floors?
jhmarie. 3 years ago. Bruce does not always discontinue its hardwood flooring in classic tones, so it is possible you can find the matching floor. That would be the least expensive, but if you don't like the color, might not be the way to go.
Can you refinish prefinished floors?
The prefinished floors can be refinished to the color you want by sanding off the finish. The finish on these floors is very strong, so refinishing may cost a little more than for a site finished floor. It will need to be sanded down to remove the finish and the bevels on the side.
Is Bruce flooring prefinished?
Yes, these are prefinished red oak. Not Bruce floors but Baroque brand. The lighter color on the walls made all the difference! A neighnor stopped by (who was friends with the former homeowner) and said, “Oh my gosh! I never noticed how beautiful these floors are!”