- Size and Thickness. Expect to pay between $800 and $1,600 for a 10-by-20-foot, single-car driveway. Anticipate a 24-by-24-foot driveway to cost between $2,300 and $4,600 on average.
- Design and Shape. Expect your concrete driveway’s costs to increase relative to the design, shape, and complexity. ...
- Labor. Labor costs vary widely across the country. Expect labor to account for about half of the total concrete driveway installation cost.
- Permits. Permits typically range between $50 and $200. However, not every town or city requires permits, but it’s always wise to check local guidelines to ensure you follow all permit ...
- Site Prep. Land excavation prices are about $0.50 to $1.50 per square foot.
- Old Driveway Removal. Most driveway contractors charge between $1 to $4 per square foot for old driveway removal. ...
- Types of Concrete. Expect to pay $6 to $12 per square foot for a stained driveway, and $8 to $15 for a stamped driveway.
- Finish. A plain finish concrete driveway costs between $6 and $8 per square foot for installation, while basic finishes cost about $8 to $12 on average.
- Lumber. Lumber prices vary widely depending on the region and have soared throughout the pandemic. ...
- Location. Depending on where you live, your concrete driveway installation costs may vary from the national average.
Full Answer
What is the average price of a concrete driveway?
The average is just above $3,000 or $6 per square foot. Factors like location, size, decorative elements, potential reinforcement and removing the existing surface can all influence that range. A simple concrete driveway ranges between $4 and $7 per square foot.
How much does it cost to build a concrete driveway?
Whether you’re replacing or building a new driveway, the average concrete driveway cost is $3,000 nationally, with a range of $1,800 to $6,000. It’s a worthy investment to make since it protects...
What is the average cost of installing a driveway?
Driveway pavers cost $10 to $30 per square foot on average for materials and labor. The average cost to install a 24’ x 24’ (2-car) paver driveway is $5,700 to $17,200. A high-end block paving stone or brick driveway costs $25 to $50 per square foot or between $15,000 and $30,000.
How much does it cost to repair a cement driveway?
The cost to Repair Concrete starts at $9.75 - $11.54 per square foot, but can vary significantly with site conditions and options. Get fair costs for your SPECIFIC project requirements. See typical tasks and time to repair concrete, along with per unit costs and material requirements. See professionally prepared estimates for concrete repair work.
How do you estimate a concrete driveway?
How to calculate concrete:Determine how thick you want the concrete.Measure the length and width that you'd like to cover.Multiply the length by the width to determine square footage.Convert the thickness from inches to feet.Multiply the thickness in feet by the square footage to determine cubic feet.More items...•
How do I calculate my driveway?
Measure the length of your driveway in linear feet. Measure the width of your driveway in linear feet. Multiply the length x width to calculate the total square footage of your driveway.
Is it cheaper to pave or concrete a driveway?
As far as installation costs and concrete costs go, poured concrete is technically the most affordable per square foot. However, even though the upfront cost of pavers is higher, concrete pavers offer greater value and durability than poured concrete and stamped concrete.
How much does it cost to pour a double driveway?
If you need to tear up your existing driveway, the costs will obviously increase. Driveway removal will cost around $1 to $3 per square foot while a replacement will cost between $3 and $12 per square foot. You can also choose to widen a driveway, but expect a price tag of around $600 to $2,400.
How thick should driveway concrete be?
four inches thickAs for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.
What's the formula for figuring concrete?
Use the formula. Calculating the volume for concrete requires using three dimensions: length times width (which is area) times the height (thickness) or L x W x H. If you are using feet as your standard unit of measurement, this formula will give you the volume of concrete in cubic feet.
How much does it cost to pour a 24x24 slab of concrete?
A typical 24x24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.
Is a concrete driveway a good investment?
In almost every case, it's worth the investment. A new driveway can increase your home's value while improving the aesthetics of your house and your neighborhood. Learn more about the benefits of a concrete driveway and how it enhances your home's curb appeal.
What is the cheapest type of driveway?
gravelAggregate, or gravel, is the cheapest and most durable of these four common driveway materials.
Is concrete cheaper than asphalt?
Because the substance used to create asphalt is less expensive than cement, asphalt driveways are usually 30% to 45% less expensive than concrete. Curing Time - Asphalt driveways can be completed faster than concrete driveways, which is the reason it is used almost exclusively for road construction.
Is concrete driveway better than asphalt?
Overall, asphalt is less durable than concrete. With proper maintenance, it can last 30 years. Alternatively, concrete provides a sturdy, long-lasting option and can last homeowners 50+ years with occasional repairs and degreasing.
How many square feet is the average driveway?
Size: The average 2-car driveway in the U.S. is 16 x 40 feet, or a total of 640 square feet. Many driveways may be larger or smaller, depending on the distance from the garage or house to the street and possible extensions for RV parking.
Cheapest Driveway Material?
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maint...
How Long Does a Driveway Last?
Driveways typically last around 30 years total, but some need more maintenance than others. Asphalt and concrete driveways need maintenance every f...
How Much Value Does a New Driveway Add?
On average a new driveway can add between $5,000 to $7,000 in added home value. Of course, that value depends upon the size of your driveway.
Which is Cheaper? Concrete or Asphalt Driveway?
Asphalt runs slightly cheaper than concrete with an average square foot cost of $3 to $7 but it won’t last as long as concrete. A concrete driveway...
How Long to Wait Before Driving on New Driveway?
It’s typically recommended that you stay off a new asphalt driveway for 24 hours, longer if it’s humid out. If you have a concrete driveway, you’ll...
How Often Should You Seal a Driveway?
Professionals recommend resealing an asphalt driveway every three to five years but it could be sooner depending upon the state of your driveway. P...
How much does it cost to install a concrete driveway?
A concrete driveway costs $1,600 to $6,400 to install or $4 to $8 per square foot on average. The cost to pour a new concrete driveway with decorative colors, borders, stamped patterns, and finishes is $8 to $18 per square foot. Old driveway removal adds $1 to $3 per square foot when replacing.
How much does it cost to remove a driveway?
Removing an old driveway costs $1 to $3 per square foot, including demolition and hauling away the debris. Removal costs depend on the size, conditions, disposal fees, and if the concrete is reinforced with rebar or wire mesh.
How much does stamped concrete cost?
Stamped concrete driveways cost $12 to $18 per square foot , depending on the number of colors and patterns. Stamped concrete, also called patterned or textured concrete, replicates the look of stone, brick, or tile. Installers use a texturized mat to imprint a pattern directly into the concrete.
How long does a concrete driveway last?
Concrete driveways last 30 to 40 years on average with proper maintenance. Exposure to freezing temperatures, extreme weather elements, and road salts reduces the driveway's lifespan. Pressure washing a driveway every few years helps it last longer.
How much does a concrete driveway apron cost?
Concrete driveway apron cost. Concrete driveway aprons cost $4 to $10 per square foot or $1,000 to $1,600 on average for a two-car driveway. A concrete apron is an 8- to 10-foot long section of pavement where the driveway meets the public street, and typically spans the driveway's full width.
How much does it cost to pour concrete?
Cost to pour concrete driveway. The average cost to pour a 1,000 sq. ft. concrete driveway slab is $4,000 to $8,000 or $4 to $8 per square foot, depending on the size, shape, and decorative finishes. Small driveways may cost more per square foot because most installers have a minimum job price. Cost to pour concrete driveway.
How much does a driveway permit cost?
A concrete driveway permit costs $50 to $200, depending on location. Most cities require a permit for new driveway installations, but may waive the fee if there's already a paved apron connecting the property to a public street.
Driveway Costs
A new driveway can add some curb appeal and more. It comes with a cost and a commitment for a few days to get the project done. A driveway costs between $1,700 to $7,000 for materials and averages $4,500. Expect to pay between $2 and $15 per square foot for materials and installation.
Driveway Cost Per Square Foot
The cost of a driveway will depend upon the condition of your current driveway, its size and the material you want to use. Gravel is the cheapest material to use at just $1 to $3 per square foot while a heated driveway is the most expensive at $12 to $18 per square foot.
Driveway Cost by Material
A gravel driveway is the cheapest way to go and it’ll last more than 100 years with regular maintenance. But it’s not attractive to every homeowner and tends to kick up dust on vehicles. Concrete driveways remain a low-cost option because they come in slightly cheaper than an asphalt driveway and often require less maintenance.
Driveway Construction Cost
Building a driveway will cost around $3 to $12 on average, depending upon the size of the driveway and the selected material. Expect to pay as much in labor as you do for materials. Labor costs can increase if the driveway needs leveling, too.
When to Build a Driveway
Depending upon your climate, summer is likely the best time to build a driveway. Plan when there are a few clear days of moderate temperatures. Installing an asphalt driveway is dirty work and you need a few days of clear skies to get it done.
Frequently Asked Questions (FAQs)
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maintenance and dust suppression.
How much does a concrete driveway cost?
A simple concrete driveway ranges between $4 and $7 per square foot. That includes about $3 to $4 per square foot of materials and $2 to $3 per square foot of labor. A strong mix with 5,000 or more pounds per inch strength leaves you at the high end of that range.
How much does it cost to install a concrete driveway?
Most concrete driveway installation costs between $1,800 and $6,000 or $4 to $15 per square foot. The average is just above $3,000 or $6 per square foot. Factors like location, size, decorative elements, potential reinforcement and removing the existing surface can all influence that range.
How much does a brick border cost?
Brick or stone borders add an average cost of $6 to $15 per linear foot . Heated coils are ideal in colder climates to help melt ice and slow, and range between $10 and $20 per square foot. Rebar or wire mesh may be necessary for added strength, which adds $1 to $3 per square foot.
How much does it cost to replace a driveway?
Replacing your driveway costs between $2,340 and $7,500. That includes both the price to remove the existing concrete at $540 to $1,510 and the new installation budget of $1,800 to $6,000. The exact rate depends on the size and type of cement.
What factors affect the cost of a concrete driveway?
The wide ranges throughout this guide are largely due to the many factors that can influence the cost of your concrete driveway. Design, materials, labor prices, and the area and climate in which the installation occurs all play a role.
How long does it take to install a driveway?
Driveway installation takes about a week, depending on its complexity, and includes the following steps: When replacing a driveway, the old material needs excavated. Your contractor determines whether the ground is firm enough to support a driveway or will need to be compacted for stability.
How much does it cost to stamp concrete?
Installing stamped concrete costs between $8 and $15 per square foot. This option allows you to add patterns and texture to your driveway. You can stamp the material to look like inlaid stone, tile or even solid marble.
How much does labor cost for a concrete driveway?
Labor makes up nearly half of concrete driveway costs. If the average price is $4 to $7 per square foot, then labor usually makes up about $2 to $3 per square foot , and concrete costs make up the rest. Laborers will prepare the site, build the concrete forms, add rebar if needed, lay the concrete, then smooth it out.
What factors affect the cost of a concrete driveway?
Size and thickness are the primary factors that influence concrete driveway costs. The larger the driveway, the more material is required. A traditional rectangular driveway will cost less than a stylized one, like a curved driveway with brick pavers along the edges.
What causes a driveway to be damaged?
Location, seismic activity, large tree roots, extreme temperatures, age, and construction affect how long a driveway will last and can cause several kinds of damage to your driveway. If that happens, a reliable contractor can help remove and replace the driveway. Advertisement. Photo: depositphotos.com.
How are prices determined for labor and materials?
Prices for labor and materials are determined by geographic location. Urban areas tend to have higher labor rates than other areas, and the time of year can also affect the cost. Some regions have climates that prevent year-round concrete driveway installations, so demand and expenses may increase during the regular season.
What is a driveway made of?
Most driveways are made of concrete or asphalt, depending on the region you live in. Concrete driveways are a popular choice due to their low cost and long lifespan. If you’re budgeting for concrete driveway costs, check out these three types of concrete.
How thick is a concrete driveway?
Most concrete driveways are 4 inches thick, but you may need to increase the thickness to withstand the extra weight if you have heavy vehicles or equipment to park. In general, concrete is sold by the cubic yard. The average concrete cost per yard is $125 to $150.
What to consider when budgeting for concrete driveway?
The terrain could require extra work or materials to ensure the driveway is stable, and some specialty designs could be added at an additional cost.
Concrete Driveway Cost Summary
Let’s start with an overview of pricing, and then we’ll break it down to see how your concrete driveway costs will be determined. These are the four most common scenarios in order of cost for materials and installation for a new concrete drive.
Breaking Down Concrete Driveway Costs
There are many steps to installing a concrete driveway. Not all of these will apply to your project.
Factors that Affect Concrete Driveway Installation Costs
Costs given so far are for basic concrete driveways. However, many driveway projects include additional costs, and we summarize those here.
Calculating your Asphalt Driveway Cost Estimate
Educated consumers end up with better driveways and more competitive prices than others. Knowing what to expect when you get estimates will assist you in discussing the project with contractors too.
Sample Concrete Driveway Installation Estimate
Perhaps a breakdown of the costs for a recent concrete driveway installation will be of assistance as you develop your own estimate. This driveway project included many common elements with a few extras.
Getting Concrete Driveway Estimates
While there are plenty of concrete driveway estimates online, most don’t go into enough detail to be of use to homeowners. That’s why we’ve broken down all of the costs – it should assist you in compiling an estimate that is very close to what you’ll get from contractors.
Concrete Driveway Maintenance and Repair
The most important maintenance task is to keep the concrete sealed. Frequency of sealing varies by climate, but it is typically every 2-6 years. Ask your installer how often to apply sealer.
How much does concrete cost per square foot?
Across the US, homeowners report that ready – mix concrete costs about $98-99 per cubic yard.#N#The average cost of a concrete slab (6 inches thick) is $5.00-5.50 per square foot, including materials and labor. However, the price can go up to $9-10 per square foot depending on numerous factors and enhancement costs.
How much does a concrete overlay cost?
The average cost of this overlay starts at $3-5 per square foot, but can go up to as much as $12-15 per square foot depending on the complexity of colors and patterns you want.
How much does stamped concrete cost?
Costs for stamped concrete vary greatly; starting at around $8 per square foot, all the way up to $20+ per square foot. Most homeowners pay a mid-range price ...
What is the benefit of concrete pavement?
Another huge benefit is that concrete pavement requires minimal maintenance compared to other materials. To achieve a custom look, contractors use various types of colors such as stains and powered pigments, and combine them with an array of patterns and textures.