What size fuel line should I run?
No matter how many bends and what not you have in the line to the pump, you still cannot flow more than the 5/16 tube can supply. In the short run, you can make 3/8 rubber fuel line connect 1/2 and 3/8 hard line. Not a good long term, but it will work until you have time.
Does a small engine mean fuel efficiency?
While you may not gain on performance next to the larger engine you're replacing, you won't lose any either--yet a smaller capacity engine should allow your gas mileage to improve. A turbocharger...
How to unflood a small engine?
Things You Will Need
- Spark plug wrench
- Starter fluid
- Dry cloth
- Screwdriver
How to build a fuel line?
Products Used:
- 6ft. ...
- 6ft. ...
- 1 – 5/8 Adhesive Lined Heatshrink – https://geni.us/5-8heatshield
- 7 – 6AN Hose End Fitting – https://geni.us/6anhose-end
- 3 – 6AN to 16mm x 1.5 Adapter – https://geni.us/6an-16mmx1-5
- 1 – 6AN 150 Degree Hose End – https://geni.us/6an-150deg-swivel-fit
- 1 – 6AN 45 Degree Hose End – https://geni.us/6an45deghose-end
What size is small engine fuel line?
Most are 1/4". But, the new fuel lines are sometimes that new material that is thinner than old fashioned rubber, and has no cloth strings in them. It is smaller outside and needs smaller clamps, depending on what you like to use.26-Nov-2015
What are small engine fuel lines made of?
Small engines on your lawnmower, ATV or motorcycle use a gas-resistant vinyl tubing called Tygon. It is usually clear or transparent yellow in color and is preferred over the clear vinyl tubing you can purchase for your beer keg tap or for use as a wiring loom.05-Dec-2014
What is the smallest fuel line?
Tygon Small Engine Fuel LineInner DiameterOuter DiameterTygon® AAG00700.080".140"Tygon® AAG001653/32"3/16"Tygon® AAG000071/8"1/4"Tygon® AAG000123/16"5/16"9 more rows
What is the best material for fuel lines?
The best fuel line material depends on your needs. However, the best material for fuel lines is polytetrafluoroethylene or PTFE. PTFE fuel line is made of plastic material specifically known as Teflon. This fuel line material is impervious is resistant to the degenerative fuel effects which could form vapor barriers.29-Dec-2021
Can you replace nylon fuel line with rubber?
You can put the nylon line several inches up into the rubber hose. It fits pretty good and never has leaked on me yet.08-Jun-2015
Can fuel line be used as vacuum line?
Wrong! Fuel hose is built to resist expansion so it doesn't burst under heat and pressure. That is opposite of what you are looking for in a vacuum hose.16-Apr-2015
What is the best gas to use in small engines?
It's best to use ethanol-free gas in small engines. If you do decide to use ethanol, don't use a fuel that is more than 10% ethanol (E10), and be sure to add fuel treatment to prevent the fuel from separating.
What are the sizes of fuel line?
Recommended Size, Based on HorsepowerRecommended Fuel Line Size (from the tank to the pump)Engine OutputSize (inches)Size (AN)350 hp or less5/16 in.-5350-450 hp3/8 in.-6450-650 hp1/2 in.-81 more row•16-Sept-2017
How are small engine fuel lines measured?
Place the top of a 1/4-inch wrench with an open end over the fuel line. Slide it carefully over the line so that it fits snugly against the tubing. Read the wrench's measurements to determine the diameter of the fuel line.
Can copper tubing be used for fuel line?
Copper tubing makes an attractive and permanent oil or fuel line and connections. Here are a few hints that might be helpful in working with copper tubing. To begin with, new copper tubing is much easier to work with than old tubing. This is because it is softer.
What tubing is good for gasoline?
It has exceptional resistance to most gasoline, oils, kerosene, and other petroleum-based chemicals, making PU tubing and hose an ideal choice for fuel lines (although additives in today's gasoline and petroleum products warrant field testing).16-Jun-2008
How do you make a fuel line fitting?
7:3518:58How To Make A Stainless Steel Fuel Line Using AN Fittings - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo be that third hand to hold that line there while you're tightening your clamp. Down but then onceMoreTo be that third hand to hold that line there while you're tightening your clamp. Down but then once that's done what we'll do is we're going to take our cutting wheel.
Tygon Fuel Line .080" x .140" 200' Spool
This part is aftermarket equipment designed to replace the original manufacturer's part numbers specified here. It is manufactured using high-quality materials, to the same specifications as the original part.
Tygon Fuel Line .080 X .140 (50' Roll)
This part is aftermarket equipment designed to replace the original manufacturer's part numbers specified here. It is manufactured using high-quality materials, to the same specifications as the original part.
Homelite 70310-98 Fuel Line
This part is aftermarket equipment designed to replace the original manufacturer's part numbers specified here. It is manufactured using high-quality materials, to the same specifications as the original part.
Special offers and product promotions
Amazon Business: Make the most of your Amazon Business account with exclusive tools and savings. Login now
From the manufacturer
Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines.
Product description
Try this Briggs & Stratton bulk fuel line of 25-feet that measures 7/16 outer-diameter by 1/4-inch inner-diameter. It is cut to fit 499742 refill for display pack.
Customers who viewed this item also viewed
Pages with related products. See and discover other items: briggs and stratton engine parts, briggs stratton engine parts, mower engine, small engine parts, gas supply hoses, line tool
Transmission Filters
Manufacturer's Supply is your best source for quality small engine parts. Need to tune up your Briggs & Stratton, Tecumseh, Lawnboy or Kohler engine? We have small engine parts like air filters, spark plugs, mufflers, and carburetor kits.
Discounted small engine parts for Briggs & Stratton, Kohler, Tecumseh and other engines. We have air filters, spark plugs, mufflers, carburetor kits, pistons, gasket sets and repair parts for your small engines
Manufacturer's Supply is your best source for quality small engine parts. Need to tune up your Briggs & Stratton, Tecumseh, Lawnboy or Kohler engine? We have small engine parts like air filters, spark plugs, mufflers, and carburetor kits.