What are copper Street elbows used for?
These wrought (wrot) copper street elbows are used to connect a copper pipe to a copper fitting at a 90-degree angle. Manufactured to ASTM and ANSI standards from commercial grade C12200 alloy used by leading copper pipe fitting manufacturers such Nibco and Mueller.
Why do plumbers use brass?
Brass pipe fittings are often the choice of plumbers and other construction professionals because of its dynamic properties. It is more durable and flexible than other material options and resistant to corrosion.
What are elbow fittings used for?
Elbows: Used to change the angle or direction of the pipe run. Most commonly in 90 degrees and 45 degree turns. The sweep of the fitting describes how fast a transition or change in direction is made.
What is brass piping?
Brass piping provides a long-lasting material that does not rust in the interior, and it does not cause friction losses inside the pipe. Brass plumbing pipes are easier to thread than steel pipes and excellent for hot-water and large distribution systems, such as pump fittings, water tanks, and wells.
What are the disadvantages of brass?
DISADVANTAGES OF BRASS Brass requires a good deal of maintenance since it is prone to a blackish tarnish. The biggest challenge to upkeep most metals, including brass, is the removal and inhibition of tarnish. All substances, especially metals, oxidize when exposed to the air.
How long will brass fittings last?
Brass: An allow of copper and zinc, brass piping is slightly less common than copper piping but has a slightly longer lifespan. Generally, brass pipes can survive between 80-100 years.
What are the kinds of elbows?
There are three main types of elbow: long radius elbows, short radius elbows, and impact/vortex elbows.
What are the four classifications of elbows?
As per the connection with pipe, elbows could be classified as Butt Welded Elbow, Socket Welded Elbow and Threaded Elbow.Butt Welded Elbow. Butt weld elbow is a steel elbow formed by hot pressing or forging. ... Socket Welded Elbow. Socket weld elbow is also welded to the pipe and fittings end. ... Threaded Elbow.
What is a standard elbow?
An elbow is an engineering term and they are classified as 90 deg or 45 deg, short or long radius. Elbows have industrial standards and have limitations to size, bend radius and angle. The angles are usually 45 deg or 90 degrees.
Is brass pipe better than copper?
Brass is an alloy made of copper and zinc. Because of this, brass valves have many of the benefits of copper valves. However, this material has a higher aesthetic quality as it bears a strong resemblance to gold. This material proves to be even stronger than copper because of the addition of zinc.
Is brass better than PVC?
Brass is more expensive than PVC and can resist corrosion better than plastic valves. It can withstand more heat than plastic, making brass valves an optimal choice for home plumbing systems.
Is brass better than galvanized steel?
Brass usually lasts longer since galvanized usually corrodes or rusts apart in 10-20 years. It is usually worth playing a little more for brass.
What is a class 125 fitting?
Also known as Class 125 fittings, they are built for use in low-pressure applications.
Do you need a sleeve for SAE fittings?
No sleeve is required to assemble these fittings, which makes for a faster, more convenient installation compared to 37° flared fittings. They are also known as refrigeration and SAE fittings.
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
Metal Barbed Hose Fittings for Air and Water
Metal hose fittings have better durability than plastic barbed hose fittings.
Metal Push-On Barbed Hose Fittings for Air and Water
Fittings are metal for better durability than plastic barbed hose fittings. They have sharper barbs than standard barbed hose fittings to grip push-on hose without the need for clamps or ferrules. The more you pull on the fittings, the tighter the hose will grip.
Metal Cam-and-Groove Hose Couplings for Water
Metal cam-and-groove couplings have better durability than plastic cam-and-groove couplings.
Quick-Disconnect Hose Couplings for Coolant
Couplings consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are designed for coolant applications up to 200 psi. Also known as coolant-line mold couplings.
Threaded Hose Fittings for Compressed Gas
Use these CGA fittings to connect welding hose to pressure regulators and torches.
Screw-On Nut Barbed Tube Fittings for Air
You don't need a clamp to secure these fittings to tubing. They have a nut on the barbed end that tightens to holds the tubing in place.
Special offers and product promotions
Amazon Business : Discover discounts and FREE shipping on work supplies. Register a free business account
Product description
Choosing accessories for your pipe fitting tools? You can finally stop buying expensive stainless steel pipe fittings, unreliable copper pipe fittings that rust so easily, and plastic plastic hex pipe fittings that break quickly and are unreliable. The best choice you can make for your project is to utilize brass pipe fittings. These fittings are: