Brake Pad Replacement Costs at a Glance
| Brake Pads Only | Brake Pads & Rotors | |
| Christian Brothers Automotive | N/A | $380-$450 |
| Firestone | $250-$320 (includes rotor resurfacing) | $350-$450 |
| Jiffy Lube | N/A | $370-$410 |
| Midas | $200-219 (includes rotor resurfacing) | $350-$400 |
| Brake Pads | Brake Pads & Rotors |
|---|---|
| $200-219 (includes rotor resurfacing) | $350-$400 per axle |
How much does it cost to repair brake rotors?
- For a 2009 Dodge Grand Caravan, a Durago pad and rotor kit costs about $71 for the front and about $56 for the rear. ...
- For a 2010 Toyota Camry, a Centric pad and rotor kit costs about $108 for the front and about $82 for the rear. ...
- For a 2008 Chevrolet Tahoe, a Raybestos pad and rotor kit costs about $104 for the front, and about $101 for the rear. ...
When to replace brake rotors?
Signs It’s Time to Replace Your Brake Rotors
- Vibration when braking. When the brake pads or rotors are going bad, it’s common to feel a vibration in the brake pedal. ...
- Loud Braking Noises. As brake pads start to fail, you will often hear a squealing or screeching sound. ...
- Cracks. After the rotors are subject to excessive heat, the surface can crack. ...
- Damage/Grooves. ...
How to resurface brake rotors?
Brake rotor resurfacing is a process where a small amount of the brake disc’s material is removed with a lathe in order to remove corrosion and brake pad deposits. It can also smooth out surface irregularities that can cause vibrations, such as varying thickness. Some brake shops will lightly resurface rotors every time they replace brake ...
How much does a Midas brake job cost?
Midas: Midas charges roughly $80 per hour for labor costs when working on brakes. They charge about $50 for a brake drum package, $60 to replace brake fluid, and upwards of $800 for a complete caliper and rotor job.
How much does it cost to get brake rotors replaced?
How much does it cost to replace the brake pads and rotors? Rotors cost between $30 and $75 each. Labor to replace rotors and pads is around $150 to $200 per axle. Brake pads and rotors come out to around $250 to $500 per axle.
How much do rotors typically cost?
If in the case the rotors are below minimum specs, the rotors will then need to be replaced. If your rotors need to be replaced as well, this could end up costing you around $250 – $500 for the entire brake job (this includes brake pads as well as rotors). Rotors themselves range anywhere from $30-$80 each.
Should I replace all 4 rotors?
You do not need to replace all 4 rotors at the same time, but it is recommended to replace the rotors and pads as a set for each axle front or back at the same time. If the front brakes need to be replaced but the rear brakes are not worn out yet, then you do not need to replace the rear brakes.
Can I just replace front rotors?
Rotors can usually only be resurfaced once, if at all, before they must be replaced. Ultimately, resurfacing rotors when you install new brake pads is a middle price point and a good compromise if you don't want to spend more money on new rotors.
How often do my brakes need to be serviced?
Depending on your vehicle, climate, brake parts, and driving patterns, your brake pads or shoes may last anywhere from 20,000 to 80,000 miles. Brake fluid can last 2-5 years. With such an unpredictable replacement cycle, regular brake inspection is essential.
How can I tell when I need new brakes?
You may need new brake pads, rotors, or new brake fluid when you notice any new sound or diminished pedal response when you brake. Worn brake pads can squeak – and the situation will worsen until you hear the grinding sound of unprotected rotors. Worn pads and low brake fluid pressure can each cause a nerve-wracking delay in pedal response.
What are the signs and symptoms of failing brakes?
Dashboard lights or warnings - Your BRAKE light, ABS light or Check Engine light may indicate brake problems.
How much does it cost to replace a brake rotor?
The average brake rotor replacement cost is between $200 and $600, depending on the car model and labor costs. The average price for parts is $150 to $400 and the average labor cost is $50 to $200
What is the purpose of a brake rotor?
The brake caliper pushes the brake pads towards the brake rotor. This creates high friction, which then, in return, helps you stop your car fast and safely.
Do you replace brake pads at the same time as rotor replacement?
Always replace the brake pads at the same time as brake rotor replacement. Ensure that the brake caliper gliding pins, brake caliper piston, and brake pads are moving freely when you are putting everything together. If you are replacing the rear brake rotors, the parking brake shoes sometimes use the brake disc’s inner side as a friction area.
Do parking brake shoes have friction?
If you are replacing the rear brake rotors, the parking brake shoes sometimes use the brake disc’s inner side as a friction area. If this is the case with your car model, you want to consider replacing the parking brake shoes simultaneously.
Do you need to replace brake rotors every time you replace brake pads?
In most car models, it is recommended to replace the brake discs with brake pads replacements. But if you drive aggressively , you might need to replace the brake rotors every time you replace the brake pads.
How much does it cost to replace rotors?
Rotors cost between $30 and $75 each.
How much does it cost to replace a brake caliper?
A complete brake repair — one that includes pads, rotor and caliper replacement — typically averages between $300 and $800. However, depending on the make and model ...
How long do brake pads last?
Most brake pad companies and mechanics can agree that quality brake pads should last anywhere between 30,000 and 70,000 miles. However, some may need replacement every 25,000 miles, while others can last far longer than 70,000 miles. Outside of brake pads, brake rotors and calipers, which are more expensive and often more complicated ...
Why are ceramic brake pads so expensive?
However, because they’re more durable, they often cost much more than their counterparts. Ceramic brake pads generally provide quieter braking and less dusting, but often their braking performance isn’t as great as a semi-metallic pad. Often times, there’s some give-and-take between materials.
What is brake work?
Brake work is one of many maintenance procedures you will have to perform over the lifespan of your vehicle. It also happens to be one of the most important. Without properly working brakes, you risk both your own safety and the safety of others on the road. Once you accept the reality that you have to pay for brake repair every so often, ...
Does a 3500 diesel truck have brakes?
The driver of a Chevy 3500 Diesel truck will pay exponentially more for new brakes than the driver of, say, a Ford Fiesta. Likewise, many 4WD and AWD cars have brake rotors that require more steps and time to remove, and ultimately cost more money in labor in doing so.
Do brakes wear out?
Driving Habits: Drivers who ride the brakes or routinely stop abruptly risk wearing out their brakes prematurely. Those who are in the habit of stopping gradually may enjoy a longer brake lifespan. Materials: Brake pads, rotors, and calipers are all made of different materials, each of which affects durability.
Ford F-150 XLT
This truck has a wide range of prices and options available for the do-it-yourself mechanic. You can buy inexpensive front rotors in the $60 range, with performance-drilled and slotted rotors for around $150. Some rotors range from $80 to over $100, including rear rotors. You can find economy rotors in the $70 range.
Toyota Camry
Because of availability, these rotors can be reasonably priced. Economic front rotors are in the $30 range, with premium front rotors in the $60 range. Expect a good quality rotor to cost in the mid- $40s. Rear rotors are more expensive, with economy options in the high $40s and premium options above $100.
KIA Forte
While a popular compact vehicle, it is not as popular as the Camry, limiting the selection and range. Front rotors start in the mid-$50s and run to just under $100 for a premium rotor. Quality rotors cost between $70 and $80. Rear rotors have even fewer options, with prices in the high $50s up to $80 for premium rotors.
Honda Pilot
Brake parts are readily available for this popular SUV. Economy front rotors cost from the low $60s, with premium rotors just above $100.
About Goodyear Brakes
Goodyear Brakes manufactures premium quality brake bundles, calipers, rotors, brake pads and all the hardware required to successfully install brakes, all backed by a national warranty, decades of production experience and one of the best-known names in automotive excellence.
Blogs
Resources Manufacturers make brake rotors for specific vehicle models, trim levels, and year. Without all the details plus the vehicle’s mileage, it’s hard to estimate
What Is a Brake Rotor?
There are a bunch of different parts that make up your car’s braking system. This includes everything from your brake pads to your brake lines to your brake calipers. But your brake rotors are some of the biggest parts in your braking system, which is what makes them so important to it.
How Do Brake Rotors Work?
Now that you know what brake rotors are, let’s talk a little bit more about how they actually work in the context of your braking system. It’s easy to take brake rotors for granted if you don’t know the work that they do to slow your car down.
How Long Do Brake Rotors Last?
As you’ve seen so far, your car’s brake rotors are very important as far as your braking system is concerned. You’re not going to be able to slow your car down and stop it without brake rotors that are in good condition. The good news is that you won’t have to worry about replacing your brake rotors too often.
How Can You Tell When Brake Rotors Are Going Bad?
When the brake pads on your car are beginning to go bad on you, it’s pretty easy to tell. You’re going to find that it’s going to be harder than usual to bring your car to a stop when you have bad brake pads in it. You’re also going to find that your brakes will make a lot of unnecessary noise when your brake pads are on their way out.
Is It Safe to Drive With Bad Brake Rotors?
There are some car problems that you continue to drive around with until you’re able to get them fixed. But any problems with your car’s brakes should not be ignored under any circumstances.
What Should You Do If You Have Bad Brake Rotors?
The moment that you notice that you have bad brake rotors in your car, you should take your vehicle down to an ASE-certified mechanic and let them take a look at it. They’ll be able to inspect your braking system to see what the problem seems to be.
Should You Ever Attempt to Replace Brake Rotors Yourself?
To try and steer clear of the brake rotor replacement cost, there are some vehicle owners who will kick around the idea of replacing bad brake rotors on their own. It sounds like it would be a simple enough job as long as you can find a quick tutorial on how to do it online.
How many millimeters does it take to do brake service?
Below 2 millimeters, however, the brake service will be needed. It’s worth mentioning that many states have specific regulations on how automotive repairs are represented and one of the common features is a legal definition for the word “needs” and the word “recommend”.
How to save money on brakes?
One way to save money on a brake job is to purchase the parts online or from a parts store and then, have a shop install them. The general ease of the job and its nature as usually problem-free maintenance makes that an option worth looking at. Not all shops will install parts that a customer provides.
How much do brake pads cost on a 2010 Camry?
For a 2010 Toyota Camry, factory pads are about $103 for the front and about $55 for the rear. Front rotors cost about $108 each and rear rotors cost about $84 each. This would make brake pad and rotor replacement about $519 for the front and about $423 for the rear at a dealership. For a 2008 Chevrolet Tahoe with four-wheel drive, ...
How much do brake pads cost on a 2009 Dodge Grand Caravan?
For a 2009 Dodge Grand Caravan, factory pads are about $141 for both the front and the rear. Front rotors cost about $108 each and rear rotors cost about $40 each. This would make brake pad and rotor replacement about $557 for the front and about $421 for the rear at a dealership. For a 2010 Toyota Camry, factory pads are about $103 for ...
How much are brake pads for a 2007 Jetta?
For a 2007 Volkswagen Jetta, factory pads are about $90 for the front and $61 for the rear. Factory rotors are about $86 each for the front and about $45 each for the rear. This would make brake pad and rotor replacement about $462 for the front and about $351 for the rear at a dealership. For a 2009 Dodge Grand Caravan, factory pads are about $141 ...
What is brake fluid made of?
Brake fluid is carried to each caliper by a brake hose which is made of flexible rubber to allow it to move with the steering and with the up and down of the suspension. Sometimes, age and wear can cause cracks in the outer rubber which allows moisture into the hose casing which can lead to rapid failure.
How thick is a brake pad?
There is some variety in practice, but a normal “good” pad thickness is over 4 millimeters. Between 2 and 4 millimeters, usually, brake service is recommended.
How much do brake pads cost?
Continue Reading. Brake pads for the front are inexpensive and will probably cost around $100 for the front end including pads and labor and turning the rotors.
What does it mean to replace rotors?
To replace the rotors means that your brakes are completely ruined and all the standard parts need replacement. This means that you not only need rotors, but brake pads and their associated kits. These kits can include slider pins, rubber bushings, clips and grease tubes to help with noise control and proper movement.
What happens if brake pads go too far?
If you let the brake pads go too far worn, then the base plate and bolts holding it on will eat into your rotor causing scoring and gouging of the rotor. That’s when the rotor needs to be replaced and why you should check your pads periodically for wear.
What is a blue book rotor job?
This means that it is quoting a specified time the job averages to accomplish. A rotor job includes removing the tires, removing the calipers and removing the rotors along with re-assembly.
Is Midas a franchise?
Most, if not all, Midas shops are franchised. Those franchisees pay into a national advertising fund and also have to give a cut to their franchisor. That puts them at a price disadvantage compared to someone with a truly independent shop.
How long does it take to get front brakes on a bike?
Depending on the make of vehicle, and how rusty/dirty it is, front brakes can take less than an hour to do or take several hours. They probably use a flat rate manual either way. fuelish on July 2008. Another day in the bike shop Pretty much what it sounds like.
Do you need new rotors for Autozone?
Autozone has drivers in pickups without any identifying marks on the driver/vehicle to deliver shops. If brakes hit metal to metal then yes, new rotors are needed. If you only machine a tiny bit which is all that's needed most of the time it is worth doing it, no shop will go out of a manufactures specs. They made a nice profit on you for sure. Considering that they pay their mechanics maybe $20 an hour, and overhead is not as much as you are making it out to be. Total parts and labor for the job they did maybe came out to $200 tops, so a good $200 is left for operating expenses and profit, if they didn't pocket at least $150 i would be very surprised.