Is blacktop cheaper than concrete?
The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.
How much does black top cost?
Blacktop Driveway Cost by GradeAsphalt GradeAverage Cost per Sq.Ft. (Material Only)Base I-2$1 - $2/sq.ft.Top I-5$1 - $4/sq.ft.Commercial top I-4$3 - $5/sq.ft.Jan 2, 2022
What is the cheapest surface for a driveway?
A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway's sub-base is sound.
How many tons of asphalt are in a truck load?
Super Dumps are capable of hauling payloads from 19 to 26 tons, if you can properly distribute the loads to each axle. A typical tandem dump truck is limited to about a 13-ton payload in accordance with federal bridge law. Increased truck capacity is important when directly unloading into the asphalt paver.
Is asphalt the same as blacktop?
Blacktop is heated to approximately 150 degrees celsius, whereas asphalt is only heated to 120 degrees celsius. Asphalt is has a higher bitumen content and for that reason is less porous and more resilient to wear and tear from high traffic and thus is the preferred choice for major highways.
Why is asphalt so expensive?
Unfortunately, thanks to the unstable economy, sulphur fuel regulations, trade restrictions and the promise of more tariffs, construction industry experts predict the cost for raw materials like asphalt and concrete will skyrocket in the coming year.
What is the most hard wearing driveway?
Concrete. Among the most durable options on the market is a concrete driveway surface. Although it provides a hard and stable surface, that is highly dependant on professional installation, high upfront costs, maintenance, and weather conditions.
How can I make an inexpensive driveway?
Driveway ideas on a budgetInstall practical paving channels to cope with the wet weather.Seal your driveway paving.Bring a touch of nature to your driveway.Consider installing hard-wearing paving.Maintain your driveway properly.
How can I save money on my driveway?
One of the best ways to save money is to use loose materials such as gravel, stone, or tar-and-chip (macadam) for your driveway surface.
How much will a ton of asphalt cover?
Asphalt cost per ton One ton of asphalt covers 30 to 80 square feet. A 2-car driveway needs 7.5 to 18 tons of asphalt, depending on the thickness.
How long can asphalt sit in truck?
3 hoursHow long can asphalt sit in a truck? Asphalt doesn't spoil like perishable items; it can sit in a dump truck for as long as 3 hours, but it is recommended to unload the asphalt as soon as it arrives. Remember, folks; the longer asphalt is in a truck, the more likely you will have build-up problems.
How many tons can a 10 yard dump truck hold?
On average, large dump trucks can carry roughly 28,000 pounds or about 14 tons. Smaller dump trucks can manage about 13,000 pounds to 15,000 pounds or 6.5 to 7.5 tons.
How much does stamped asphalt cost?
Colored or stamped asphalt costs $5 to $15 per square foot for a new driveway or replacement, or $3 to $8 per square foot for resurfacing the top layer. A 20x20 stamped asphalt driveway costs $2,400 to $6,000. Decorative patterns are sealcoated, which colors and protects the surface.
How much does it cost to pave a 10x15 patio?
Paving a 10’x15’ asphalt patio costs $450 to $1,050, while paving a 20’x20’ patio costs $1,200 to $2,800 installed with a gravel base. Patios require a compacted gravel foundation for stability. These fees do not include extra charges for rounded shapes, stamped brick patterns, and special colors.
How thick should a driveway be?
A new residential driveway needs 3 to 5 inches of asphalt over 4 to 8 inches of rock-base foundation to withstand temperature changes and last 20+ years. Some companies recommend a 2" thickness to save $0.50 to $1 per square foot, but won't provide a warranty due to deterioration risks.
How much does it cost to repave an asphalt driveway?
The average cost to repave an asphalt driveway is $4 to $10 per square foot with a new gravel base or $3 to $7 per square foot with an existing base. Repaving a 2-car (20’x20’) asphalt driveway costs $1,600 to $4,000 on average. Repaving includes removing and hauling away the existing asphalt.
How long does asphalt last?
An asphalt driveway lasts 15 to 30 years and requires sealcoating every 3 to 5 years. Boosts curb appeal and resale value. A new asphalt driveway needs an asphalt layer 3" to 5" thick to last. Resurfacing only the top layer or asphalt overlay costs $1 to $3 per square foot.
How much does it cost to lay asphalt over concrete?
Laying new asphalt over a concrete driveway costs $1 to $3 per square foot. Contractors fill cracks with concrete-repair caulk before paving. Resurfacing concrete with asphalt is cheaper than replacing concrete. However, special preparation is required to stabilize the concrete and prevent cracks.
How much does it cost to pave a road?
Cost to pave an asphalt road. The average cost to pave a private one-lane asphalt road is $35 to $85 per linear foot. Paving a two-lane (24'-wide) asphalt road costs $70 to $170 per linear foot or $370,000 to $900,000 per mile. Blacktop road construction costs more than driveways because roads need 5" to 11" thick asphalt.
Driveway Resurfacing Package
Mill or notch all driveway entrances or tie-ins to address drainage issues.
Understanding Mix Design
Virgin mix with no RAP (recycled asphalt products) is more expensive. $68 per ton.
Here are some seal coating tips
Our Company doesn’t offer seal coating services. Prices vary from $0.08 – $0.18 per square foot. $0.13 per square foot is common.
How Much Does an Asphalt Driveway Cost?
The average cost for an asphalt driveway is $4,996, but that will vary depending on several factors, including the size of your driveway, how deep of a layer of asphalt you want for your driveway, and even the type of asphalt.
Cost Estimator by Driveway Size
The size of your driveway is the biggest factor in determining the cost of your asphalt driveway. Expect to be charged at least $3,258 for an average-sized driveway at an average price. Sometimes the costs of labor will be added, sometimes they are included. Here we’ll break down the costs by square foot, ton, and labor hours.
Other Factors Affecting Cost
Your final bill for your asphalt driveway is going to depend on a lot of factors, including the depth of your asphalt layer, any decorative (stamped asphalt) or extraordinary (heated driveway) features, and the cost of substrate.
Services Often Bundled With Asphalt Driveways
Other outdoor services are often bundled with the installation of an asphalt driveway. Most of these additional services (tree removal or land grading, for example) involve preparing the land for your driveway.
Costs of a DIY Asphalt Driveway
You may be tempted to install your own asphalt driveway. Resist the temptation. This is going to be an enormous project. But if you think you’d like to DIY your asphalt driveway, we’ll outline the pros and cons as well as costs and materials required.
Conclusion
An asphalt driveway will cost you anywhere from $3,086 to $7,912, with an average cost of $4,996. Note that the price of any add-on services will increase your final bill.
About Us
LawnStarter is a startup making lawn care easy affordable and reliable. Follow this blog to stay tuned with what you need to keep your lawn in tip-top shape year-round.
Compare Quotes From Top-rated Local Flooring Contractors
The average costs to pave a driveway range between $3 and $15 per square foot. The cost depends on materials, size of the driveway and installation requirements. Expensive materials can cost as much as $30 per square foot while cheaper materials are as low as $1 per square foot.
Driveway Cost Per Square Foot
The cost of driveway installations is typically determined by the driveway site’s square footage. While the material itself and the installation cost affect the price per square foot, the square footage of a driveway will sum the total cost of the project.
Driveway Cost By Material Type
Depending on the material, paving a driveway can cost anywhere from $1,500 to over $11,000. Concrete is a popular choice because of its durability and long-lasting nature. Other popular types of driveways include asphalt or blacktop, gravel, pavers and rubber.
Driveway Installation Cost
The total cost of driveway installation depends on the size of the driveway, site conditions and the material used. Labor can make up about half of the total price per square foot while the price for new material can make up the other half. Thickness can affect material cost, especially for concrete and asphalt.
Frequently Asked Questions
Gravel is the least costly material to pave a driveway. The price ranges from $1 to $3 per square foot. The average total cost is usually around $1,200, though this number may not account for the fact that gravel is usually used to pave much larger driveways as a cost-reduction solution.
How much does it cost to deliver crushed asphalt?
Crushed asphalt delivery costs $30 to $100 per truckload (8 to 20 tons). Delivery increases the cost per ton and yard by 50%, depending on the quantity and distance. Some companies offer free delivery with a minimum purchase. Small amounts of millings are typically not eligible for delivery.
How much does asphalt milling cost?
Asphalt millings can and should be sealed to make pavement last longer. Asphalt sealing costs $0.20 to $0.70 per square foot, depending on the cleaning and prep work required. Hire a professional paver to choose the most-suitable asphalt millings sealer and application method.
How much does recycled asphalt weigh?
Recycled asphalt weighs 90 to 120 pounds per cubic foot or between 1.2 and 1.6 tons per cubic yard, depending on the quality and mix composition. Asphalt millings typically weigh less than new hot-mix asphalt. Rain makes recycled asphalt millings heavier by raising its moisture content.
How long does it take for recycled asphalt to harden?
After steamroller compaction and sealing, the recycled asphalt millings take 24 to 48 hours to harden. First, the steamroller will compress and heat the millings that bind together to create a hardened level surface. Then pavers spread a sealant on top to stabilize the blacktop.
What is asphalt milling?
Asphalt millings are old recycled asphalt pieces crushed into a smaller gravel-size rock. Contractors compact and seal the crushed asphalt to create driveways, roads, parking spots, sidewalks, or blacktops. Asphalt-recycling facilities heat reclaimed millings to remove impurities and excess moisture.
How much asphalt do I need for a tennis court?
How much recycled asphalt do I need for a basketball or tennis court? Recycled asphalt for a 94x50-foot basketball court costs $700 to $1,800 and requires 70 to 90 tons of asphalt millings. A 78x36-foot tennis court requires 40 to 55 tons of recycled asphalt that costs $400 to $1,100 on average. Return to Top.
How much does it cost to recycle asphalt?
A recycled asphalt driveway costs $2 to $5 per square foot installed or from $0.15 to $0.40 per square foot for materials only. A ton of asphalt millings covers 60 square feet on average, while a cubic yard covers 80 square feet at 4" deep.
Asphalt calculator formula
Based on the measurements you provide for required length, width and thickness, the calculator first works out the area and volume of the hot asphalt mix required using the below formulas:
Calculation examples
Imagine I want to pave over an area measuring 20 feet by 4 feet to a thickness of 6 inches using standard asphalt (140 lb/ft³) and costing $150 per US short ton.
What if my measurements are in different units?
The best thing about our asphalt calculator is that it takes care of this for you.