How does the blacktop and sealcoat calculator work?
Our blacktop and sealcoat calculator is helpful for homeowners, contractors, and property owners because it lets you find out how much sealer you will need depending on your application method and your required coverage in square feet.
How do you measure blacktop for sealing?
Blacktop Calculator. Simply measure the width and length of your sealcoating area, and multiply it to find how many square feet you are sealing. If it’s a small driveway, then you can use a tape measure or measuring wheel. For larger parking lots, you will have to use a measuring wheel or a measuring device that you can drive around the property.
Is there more than one type of Blacktop?
Contrary to what you may think, there is more than one type of blacktop, mainly depending on the temperature during mixing. Selecting the right type is important, as some asphalts are better suited to particular applications than others.
How does the estimator work out volume and cost?
The estimator does the following calculations to work out the volume in cubic yards, weight in tons and cost in dollars. $$Weight = Volume imes Density = 7.407\,yd^3 imes 140\,lb/ft^3 = 14\,t$$
How do you calculate blacktop?
Estimate the volume of asphalt needed, using geometrical formulas and plans or measurements, including width, length, and depth (thickness). Estimate the density of the hotmix to be used. Standard density for asphalt is 145 lb/ft3 (2322 kg/m3). Multiply the volume by the density (in the same units) to get the weight.
How do you calculate the cost of an asphalt driveway?
For the simplest estimate, you can use this formula.Length x width=Square footage of the driveway.Driveway sq ft x $3= low end cost.Driveway sq ft x 7= high end cost.Driveway sq ft x $2= low end cost.Driveway sq ft x $4= high end cost.When to reseal your driveway:When to repave your driveway:
How do you quote asphalt?
For example, a 10′ wide x 20′ long driveway with a depth of 3″ would be 50 cubic feet. To find the amount of asphalt needed, multiply the cubic footage by 145 to find the total weight needed, then divide by 2,000.
How much does a yard of asphalt cover?
Asphalt cost per cubic yard A cubic yard covers 65 to 110 square feet with an asphalt layer 3 to 5 inches deep.
How much is a 700 ft driveway?
For a larger driveway or thicker base, the cost will be higher. For example, a driveway 15 feet wide by 700 feet long with a six inch base will need approximately 25 tons of gravel, at a material cost of about $700. With delivery, the total cost will be around $1000.
How thick should a blacktop driveway be?
Residential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate. Underneath this you have soil.
What is the asphalt price index?
2022 State IndexesStateJanFebCalifornia$404.70$460.70Colorado$436.23$526.01Connecticut$512.50$522.50Delaware$545.00$566.6742 more rows
How do I calculate my driveway?
Measure the length of your driveway in linear feet. Measure the width of your driveway in linear feet. Multiply the length x width to calculate the total square footage of your driveway.
How much does black top cost?
Type of Driveway Material Cost Per Square FootDriveway Material Cost Per Square Foot EstimateAsphalt/Blacktop$7 - $13Gravel$1 - $3Chip Seal$2 - $5Heated$12 - $216 more rows•Mar 29, 2022
How many tons of asphalt are in a dump truck?
A typical tandem dump truck is limited to about a 13-ton payload in accordance with federal bridge law. Increased truck capacity is important when directly unloading into the asphalt paver.
How many tons is 2 yards of asphalt?
Typically, 1 cubic yard of Asphalt yields 1.95 short tons, for 2 cubic yards, it will yield about 3.9 short tons, for 3 cubic yards, it will yield about 5.85 short tons, for 5 cubic yards, it will yield about 9.75 short tons and for 10 cubic yards, it will yield about 19.5 short tons.
How many square feet will a yard of crushed asphalt?
Asphalt millings prices per yard One cubic yard of asphalt millings covers 80 square feet at 4" thick.
What is Asphalt?
Asphalt is a semi-solid form of petroleum and appears in a sticky, black, highly viscous liquid form. It is classified as a pitch and can be found in natural deposits as well as a refined product. If it has a mixture of 95 stone, sand, or gravel that bounds together by asphalt cement, then it will be known as hot mix asphalt.
How Asphalt Calculator Works?
This asphalt estimator supports you in making the estimation about the quantity of asphalt in volume and weight that will be needed for a driveway, schoolyard, pavement, road, etc. blacktop calculator can be used as follows:
FAQs
The thickness should be about two inches as it is considered a standard for asphalt overlays and surface courses. Two-inch thickness has the potential to properly bonds the surface course to the binder course. If the thickness is less than two-inch it will cause raveling, cracking, and other asphalt issues.
Last Words
This online asphalt calculator provides a great opportunity for learning to all those people who are specializing in Construction services. It helps to ensure that any company and its employees can make accurate and precise calculations about the amount of asphalt that is required for different projects.
Reference
From the source of Wikipedia: Hot-mix asphalt concrete, Warm-mix asphalt concrete, Cold-mix asphalt concrete.
Asphalt calculator formula
Based on the measurements you provide for required length, width and thickness, the calculator first works out the area and volume of the hot asphalt mix required using the below formulas:
Calculation examples
Imagine I want to pave over an area measuring 20 feet by 4 feet to a thickness of 6 inches using standard asphalt (140 lb/ft³) and costing $150 per US short ton.
What if my measurements are in different units?
The best thing about our asphalt calculator is that it takes care of this for you.
How much does it cost to install asphalt?
Asphalt paving material usually costs $40-80 a ton. One ton will cover 30 to 80 square feet. A residential driveway averages 9-24 square feet. Other materials are needed for asphalt driveway installation as well, and will affect the final cost.
What is the most expensive option to have a driveway removed?
Repaving. Repaving your driveway requires removing the old driveway completely. This is the most expensive option, because you will be paying to have the old driveway removed and a new driveway installed. This is of course the most expensive option, but a paved driveway has a lifespan.
How much does a paver driveway cost?
They offer a wide variety of designs, shapes, sizes, and colors. A paver driveway will cost between $13-15 per square foot. A poured concrete driveway ranges from $7-9 per sq ft.
What is the cheapest driveway?
A gravel driveway is the cheapest option if you need a new driveway, at $1-3 per sq ft. It matches with any style of home. Classic gray gravel is well suited to a winding country drive. White gravel provides a modern look.
How much does crushed stone cost?
It’s ideal for all driveways, but it does require occasional smoothing and refilling. The cost is surprisingly low, at $3-5 per square foot. 3-5 for crushed stone 1-3 for gravel.
Is a straight driveway cheaper than a curved driveway?
A straight driveway is easier to install than a curved or circular drive. A larger driveway will usually cost less per square foot, but have a higher overall cost than a smaller driveway. Lastly, accessibility must be considered. If the driveway is difficult to access, it will cost more to install.
Does grading and excavation add to asphalt?
Excavation and Grading. Excavation and grading can add to asphalt driveway costs. If you have an existing driveway, it may have to be removed. If it’s a new driveway, excavation and grading will probably be required to provide a level surface.
How much does it cost to repair a blacktop driveway?
Over the 15–20 year life of a blacktop driveway, repairs and maintenance cost $800–$1000. Compared to gravel, however, asphalt is solid to walk on in any footwear, including high heels. Commercial blends may be coarse or smooth. Ultra-smooth surfaces are easier to repair and maintain, but rough finishes offer traction.
How much does asphalt cost?
It costs $8.50 per square foot — $2040 for a single-car driveway and $3553 for a two-car sized drive — and is available in colors on the black-gray spectrum. The cost of materials plus labor averages $3500—$4100.
How much does it cost to pave a driveway?
Nationwide, paving a driveway costs between $2700 and $6500. Depending on the size of your driveway and choice of materials, you could pay as little as $1200 to $12,000 or more. The average homeowner spends $4000.
How much does concrete cost per square foot?
Concrete driveways costs slightly more than asphalt per square foot — $9.00 versus $8.50 — but it’s a favorite because it’s durable, attractive and relatively low-maintenance. Estimates for labor and materials average $3900–$6000 for a 240-square foot area.