Driveway Material Cost Per Square Foot Estimate
| Concrete | $3 - $18 |
| Asphalt/Blacktop | $7 - $13 |
| Gravel | $1 - $3 |
| Chip Seal | $2 - $5 |
| Heated | $12 - $21 |
How much does it cost to Blacktop a driveway?
‘ Paving a new driveway costs an average of $4,482, but typically falls in the range of $2,403 to $6,563,’ says Bailey Carson, home care expert at Angi.
Should I get a blacktop driveway?
The blacktop mixtures used on an interstate highway may be just fine for some residential driveways, but you’d have to take a number of things into consideration. For example, let’s talk about my...
What is the average cost of installing a driveway?
Driveway pavers cost $10 to $30 per square foot on average for materials and labor. The average cost to install a 24’ x 24’ (2-car) paver driveway is $5,700 to $17,200. A high-end block paving stone or brick driveway costs $25 to $50 per square foot or between $15,000 and $30,000.
What is the average sq ft for a driveway?
per sq. ft. A typical two-car driveway is 16 feet wide and 38 feet long without curves or slope, for a total surface area of 610 square feet or 68 square yards. Click to see full answer. Also question is, how do you calculate square footage of a driveway? To calculate square footage, you must Measure the length of your driveway in linear feet.
Which is cheaper a concrete or an asphalt driveway?
The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.
How do you calculate the cost of an asphalt driveway?
For the simplest estimate, you can use this formula.Length x width=Square footage of the driveway.Driveway sq ft x $3= low end cost.Driveway sq ft x 7= high end cost.Driveway sq ft x $2= low end cost.Driveway sq ft x $4= high end cost.When to reseal your driveway:When to repave your driveway:
What is the cheapest surface for a driveway?
A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway's sub-base is sound.
What is better blacktop or concrete?
Asphalt is easier to repair than concrete but needs it more frequently. While both asphalt and concrete crack, asphalt tends to deteriorate faster due to its softer consistency. However, it's fairly easy to repair cracks and damage in asphalt, and the repaired areas generally blend well with the rest of the driveway.
How thick should a blacktop driveway be?
Residential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate. Underneath this you have soil.
Is asphalt the same as blacktop?
Blacktop is heated to approximately 150 degrees celsius, whereas asphalt is only heated to 120 degrees celsius. Asphalt is has a higher bitumen content and for that reason is less porous and more resilient to wear and tear from high traffic and thus is the preferred choice for major highways.
How can I save money on my driveway?
Use Local Concrete Save money on your driveway by substituting one raw concrete material for another, particularly if one type of concrete is fabricated exclusively for your geographic area and costs less to make.
What type of driveway lasts the longest?
ConcreteConcrete is the old standby for driveways. Most suburban homes opt for this material for two big reasons: Concrete is typically the longest-lasting driveway surface, and, if installed properly, it is practically maintenance-free.
How much does a driveway increase home value?
5-10%You may be considering if the driveway is worth cleaning up, or about adding one to your home. You may be surprised to learn that a driveway does add value to your home. On estimate a driveway can increase your property's value by 5-10%. That is quite a bit for an area you do not really need to pay a lot to revamp.
How often should asphalt driveway be sealed?
every two to three yearsHOW OFTEN SHOULD YOU SEAL YOUR DRIVEWAY? Asphalt sealcoating is every two to three years depending on how much traffic your driveway gets or how constantly it is being exposed to the elements such as UV rays, snow and other chemicals.
What type of driveway is best?
Concrete. Among the most durable options on the market is a concrete driveway surface. Although it provides a hard and stable surface, that is highly dependant on professional installation, high upfront costs, maintenance, and weather conditions.
What type of asphalt is best for driveways?
Hot mix asphaltHot mix asphalt is considered best for driveways, because construction and design features are suitable to giving it a finished appearance that complements the home.
What’s the cheapest type of driveway material?
Gravel is the least costly material to pave a driveway. The price ranges from $1 to $3 per square foot. The average total cost is usually around $1...
How long can a driveway last?
It depends on the material used to pave the driveway. Gravel can last up to 100 years with a solid foundation and regular maintenance. Concrete can...
How long does it take before you can drive on a new driveway?
Different materials require different times to cure. Asphalt takes at least 48 to 72 hours to fully cure while concrete can take seven to 10 days....
Cheapest Driveway Material?
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maint...
How Long Does a Driveway Last?
Driveways typically last around 30 years total, but some need more maintenance than others. Asphalt and concrete driveways need maintenance every f...
How Much Value Does a New Driveway Add?
On average a new driveway can add between $5,000 to $7,000 in added home value. Of course, that value depends upon the size of your driveway.
Which is Cheaper? Concrete or Asphalt Driveway?
Asphalt runs slightly cheaper than concrete with an average square foot cost of $3 to $7 but it won’t last as long as concrete. A concrete driveway...
How Long to Wait Before Driving on New Driveway?
It’s typically recommended that you stay off a new asphalt driveway for 24 hours, longer if it’s humid out. If you have a concrete driveway, you’ll...
How Often Should You Seal a Driveway?
Professionals recommend resealing an asphalt driveway every three to five years but it could be sooner depending upon the state of your driveway. P...
How much does a blacktop driveway cost?
A new blacktop driveway costs $3 to $7 per square foot on average. Cost factors that affect the total estimate include the:
How much does it cost to pave a driveway?
Asphalt paving costs $3 to $7 per square foot installed. Paving a new asphalt driveway costs $1,200 to $4,000 on average. The cost to pave a private asphalt road is $35 to $85 per linear foot. Asphalt parking lot paving costs $3 to $7 per square foot. An asphalt sidewalk costs $12 to $28 per linear foot.
How thick should a driveway be?
A new residential driveway needs 3 to 5 inches of asphalt over 4 to 8 inches of rock-base foundation to withstand temperature changes and last 20+ years. Some companies recommend a 2" thickness to save $0.50 to $1 per square foot, but won't provide a warranty due to deterioration risks.
How long does asphalt last?
An asphalt driveway lasts 15 to 30 years and requires sealcoating every 3 to 5 years. Boosts curb appeal and resale value. A new asphalt driveway needs an asphalt layer 3" to 5" thick to last. Resurfacing only the top layer or asphalt overlay costs $1 to $3 per square foot.
How old is a driveway for asphalt resurfacing?
Asphalt resurfacing is best for driveways less than 15 to 20 years old with good foundations that have widespread yet shallow cracks.
How much does stamped asphalt cost?
Colored or stamped asphalt costs $5 to $15 per square foot for a new driveway or replacement, or $3 to $8 per square foot for resurfacing the top layer. A 20x20 stamped asphalt driveway costs $2,400 to $6,000. Decorative patterns are sealcoated, which colors and protects the surface.
How much does it cost to lay asphalt over concrete?
Laying new asphalt over a concrete driveway costs $1 to $3 per square foot. Contractors fill cracks with concrete-repair caulk before paving. Resurfacing concrete with asphalt is cheaper than replacing concrete. However, special preparation is required to stabilize the concrete and prevent cracks.
How much does it cost to build a driveway?
It comes with a cost and a commitment for a few days to get the project done. A driveway costs between $1,700 to $7,000 for materials and averages $4,500. Expect to pay between $2 and $15 per square foot for materials and installation. You can save money by choosing a material that fits your budget, but each material has a different lifespan, so weigh the costs against the longevity.
What is the cheapest driveway material?
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maintenance and dust suppression.
How long does a gravel driveway last?
A gravel driveway is the cheapest way to go and it’ll last more than 100 years with regular maintenance. But it’s not attractive to every homeowner and tends to kick up dust on vehicles. Concrete driveways remain a low-cost option because they come in slightly cheaper than an asphalt driveway and often require less maintenance. Concrete will expand and contract, leading to chips and cracks, plus it will stain easily. Concrete driveways typically last between 25 and 75 years.
How much does a heated driveway cost?
Gravel is the cheapest material to use at just $1 to $3 per square foot while a heated driveway is the most expensive at $12 to $18 per square foot. But a heated driveway is only desirable in colder climates where it can melt ice and snow in winter.
How long does asphalt last?
It will soften in heat and will crack easily. Asphalt driveways will last around 15 to 30 years but need to be sealed every three to five years.
How much does a new driveway add to the value of a home?
On average a new driveway can add between $5,000 to $7,000 in added home value. Of course, that value depends upon the size of your driveway.
When is the best time to build a driveway?
Depending upon your climate, summer is likely the best time to build a driveway. Plan when there are a few clear days of moderate temperatures. Installing an asphalt driveway is dirty work and you need a few days of clear skies to get it done.
How much does it cost to seal a blacktop driveway?
To protect asphalt from the climate, homeowners should fill cracks annually and apply a protective sealant every 3–5 years — costs range from $0.20 to $0.50 per square foot plus labor. Over the 15–20 year life of a blacktop driveway, repairs and maintenance cost $800–$1000.
How much does it cost to pave a driveway?
A professionally paved driveway enhances the look and function of your home — their appeal is undeniable. Nationwide, paving a driveway costs between $2700 and $6500. Depending on the size of your driveway and choice of materials, you could pay as little as $1200 to $12,000 or more. The average homeowner spends $4000.
How long does a gravel driveway last?
With care, a gravel driveway can last 50 years or more before it needs a major overhaul. Gravel does have drawbacks. It’s not as hard or even as asphalt or concretion and can be a tripping hazard. It’s prone to ruts, and in cold climates, snow removal takes some of the gravel with it.
Why do you put a walkway and driveway together?
Paving walkways leading to a home or garage in the same material as the driveway makes a home look well-kept. Doing them together saves money.
What do driveway bases do?
All driveways require a sturdy base regardless of their surface material. What does a base do? Bases create a firm foundation and proper drainage for your driveway. Imagine concrete pavers installed on topsoil — one good rain, and they’re floating on mud. Base materials such as crushed gravel or granite allow water to flow through without straining the concrete or asphalt.
Why is my concrete driveway heaving?
The small spaces between each allow moisture to drain underneath, but in cold climates, the build-up of water and ice can cause heaving. Pros recommend using thicker, heavier slabs to keep the driveway stable. Drawbacks to concrete driveways include staining — a problem that regular cleaning solves — and cracking.
How much does asphalt cost?
It costs $8.50 per square foot — $2040 for a single-car driveway and $3553 for a two-car sized drive — and is available in colors on the black-gray spectrum. The cost of materials plus labor averages $3500—$4100.
How much does it cost to build a driveway?
The cost to build a driveway ranges from $600 to $18,000, depending on the material. The cheapest driveways cost $1 to $3 per square foot for gravel, while standard concrete and asphalt driveways cost $3 to $8 per square foot.
How much does an exposed aggregate driveway cost?
Exposed aggregate or pebble finish driveways cost $5 to $11 per square foot or $3,000 to $6,600 on average. Exposed aggregate features stones mixed into concrete or seeded on the surface. Natural aggregates provide a textured, nonskid surface in various colors, including pastels, earth tones, and deep reds and blues.
How long does a concrete driveway last?
Asphalt driveways last 15 to 30 years, and concrete driveways last 30 to 40 years on average, depending on the climate and usage. Brick and stone pavers last 25 to 50 years. A cobblestone or gravel driveway lasts up to 100 years if well-maintained.
What is the cheapest driveway material?
The cheapest driveway material is gravel at $1 to $3 per square foot using aggregate made of crushed shells, crushed concrete or asphalt, or pea gravel . Tar and chip seal driveways are the second cheapest at $2 to $5 per square foot.
How much does gravel cost?
Well-built gravel driveways require light raking and new gravel once or twice a year. Gravel prices range from $10 to $50 per ton, depending on the stone size and type.
How much does a chip seal driveway cost?
Chip seal driveways cost $1,200 to $3,000 or $2 to $5 per square foot. Chip seal, also called tar and chip, lasts 7 to 10 years. Tar and chip driveways have the durability of blacktop, come in various colors, and feature layers of stone aggregate spread over hot liquid asphalt.
How much does a driveway permit cost?
A driveway permit costs $50 to $200, depending on location. Most cities require permits for new driveway installations and replacements but not for repairs. Some municipalities waive the permit fee if there is already a paved apron connecting the property to a public street.
How Much Does an Asphalt Driveway Cost?
The average cost for an asphalt driveway is $4,996, but that will vary depending on several factors, including the size of your driveway, how deep of a layer of asphalt you want for your driveway, and even the type of asphalt.
How much does it cost to install an asphalt driveway?
A professional asphalt driveway installation will run you an average of about $5,000, while DIY could cost you under $1,000 if you have a small enough driveway.
How many square feet does 1 ton of asphalt driveway cover?
Keep in mind that 1 ton of asphalt gives you 80 square feet at a 2-inch thickness and 40 square feet at a 4-inch thickness.
How many tons of driveway is needed for a 4 inch driveway?
A 2-inch thick driveway will require 1 ton per 80 square feet. A 4-inch thick driveway will need 1 ton for every 40 square feet. Let’s test this out on some common driveway sizes:
What is the base layer of a driveway?
The base layer is your driveway’s foundation. Often made of gravel or similar materials, the sub base provides a sturdy surface on which to lay asphalt and protects your driveway from damage caused by freezing and thawing.
How much does it cost to stamp asphalt?
Stamped asphalt typically costs between $12 and $17 per square foot. Here is what you can expect to pay to get the whole driveway done with decorative asphalt.
What are some outdoor services that are included in an asphalt driveway?
Other outdoor services are often bundled with the installation of an asphalt driveway. Most of these additional services (tree removal or land grading, for example) involve preparing the land for your driveway.
How much does asphalt cost per ton?
Asphalt cost per ton. Asphalt costs $40 to $80 per ton on average. Asphalt prices vary depending on the mix and material ingredients. One ton of asphalt covers 30 to 80 square feet. A 2-car driveway needs 7.5 to 18 tons of asphalt, depending on the thickness. Asphalt cost per ton by material - chart.
How much does a 50 lb bag of asphalt cost?
A 50 lb. bag of cold-patch asphalt costs $8 to $20 and covers 5 to 7 square feet at a 1" depth. Cold-patch asphalt is the only DIY-friendly option that cures by compaction alone.
What is the difference between asphalt and blacktop?
The terms “asphalt” and “blacktop” are slightly different. Highway pavers use asphalt, which contains less stone than real blacktop. Blacktops are used for residential areas with less traffic, are easier to repair, and more durable than asphalt.
How much does it cost to rent an asphalt paving machine?
Renting an asphalt paving machine costs $750 to $3,600 per day on average. Asphalt roller rental costs $120 to $700 per day for ride-on compactors 3 to 4-foot wide. Renting asphalt paving machinery sometimes requires a commercial driver’s license and additional training.
How many tons of asphalt is in a cubic yard?
There are typically 2 tons in 1 cubic yard, depending on the mixture's density. A cubic yard covers 65 to 110 square feet with an asphalt layer 3 to 5 inches deep.
How much does it cost to haul asphalt?
A bulk truckload of asphalt costs $500 to $1,800, including delivery fees. Tandem trucks carry 13 to 20 tons of asphalt that cover 550 to 850 square feet with a layer 3 to 5 inches thick. Prices vary according to the asphalt-delivery distance.
Is reclaimed asphalt lighter than new asphalt?
Reclaimed asphalt is lighter in color than new black asphalt.
How much does it cost to resurface an asphalt driveway?
Stamping, patterns, or colored asphalt resurfacing costs $3 to $8 per square foot. The average cost to resurface an asphalt driveway is $400 to $1,800, depending on the blacktop size and condition.
How much does it cost to install a gravel driveway?
A gravel driveway costs $1 to $3 per square foot or $600 to $1,800 for a 24×24 (2-car) driveway. Installing gravel is easier and typically includes minor grading and leveling. Return to Top.
What is driveway resurfacing?
Driveway resurfacing is pouring a new asphalt overlay 1.5" to 2.0" thick over the old layer. Contractors patch cracks and holes or grind off the top layer to remove all damage. Then they spread and compact new asphalt with a machine roller. Resurfacing is cheaper than repaving.
How long does asphalt last?
Asphalt resurfacing lasts 8 to 15 years on average. However, a newly reconstructed asphalt pavement lasts between 20 and 30 years with proper maintenance. Resurfacing is only a long-lasting solution when the original pavement foundation is strong.
How much does it cost to resurface concrete?
Resurfacing concrete with asphalt costs $1 to $3 per square foot but requires a stable concrete base and expansion joints.
How much does it cost to remove asphalt?
Removing or milling the top layer of asphalt costs $0.25 to $0.75 per square foot. Milling before resurfacing creates a uniform pavement depth in severely damaged asphalt. Milling also levels new paving with the surrounding apron, sidewalk, and garage transitions.
How much does stamped asphalt cost?
Colored or stamped asphalt overlays cost $3 to $8 per square foot total. Stamped asphalt mimics the look of stone or brick pavers. After resurfacing, contractors compact a wire template onto the hot asphalt. Coloring is either a surface coating or colored-rock paving additive.