Full Answer
What if there are two black wires and no white?
The question posted said there was NO white wire yet some responses missed that most important point. Some UL approved fixtures in CURRENT lamps have 2 black wires, no white, or in this case 2 gold wires. The person who solved the problem noted a difference even if both wires are the same color.
Which wire is live on American cable white or black?
The neutral is white, the hot (live or active) single phase wires are black, and red in the case of a second active. Three-phase lines are red, black, and blue. Canada AC power circuit wiring color codes IEC, DC: DC power installations, for example, solar power and computer data centers, use color coding which follows the AC standards.
Do you connect the white wire to the Black Wire?
Typically, a black wire is used as the feed and the white wire is the neutral in an A.C. circuit. But as my father used to say:”electricity is colorblind. It doesn't know, not does it care what color the wire is. So it's up to the technician to connect the wires correctly.
What are white green and black wires typically for?
The different colors of electrical wires indicate the function of the wire, with black and red indicating the wires carry electric current, white usually indicating neutral charge and green indicating the wire is grounded. The colors, regulated by the National Electrical Code in the United States, are standardized for safety.
Is black wire with white stripe positive?
If both wires are black but one has a white stripe, the striped wire is negative, while the plain black wire is positive.
What is the black wire with a white strip is for?
The solid/dashed lines on wires like the ones pictured in your question are used to indicate polarity e.g. for the "wall wart" power supplies. Usually* the wire with the white stripe or the dashed lines carries the "positive" (+) end, while the other, unmarked wire carries the "negative" (-) end.
What is the black wire with white stripe on a ceiling fan?
The black wire is the hot wire that leads to the switch. The white wire is neutral and completes the electrical circuit. Copper or green wire is the ground wire and keeps the fan from experience power surges.
Is a black and white stripe wire ground?
In Electricity, Black Wire Is Positive. According To Nec, Black wires are positive whereas white wires are negative while green wires are ground. They expect manufacturers in the US to use the green color to identify the ground.
Which wire is hot if both are black?
Here's a rundown of electrical wires: The black wire is the "hot" wire, it carries the electricity from the breaker panel into the switch or light source. The white wire is the "neutral" wire, it takes any unused electricity and current and sends it back to the breaker panel.
How do you tell positive from negative wires?
0:304:34how to know positive and negative wire - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe silver is usually your negative and the copper is your positive side. And also some speaker wireMoreThe silver is usually your negative and the copper is your positive side. And also some speaker wire have if you've ever noticed in dealt with speaker wire some of its ribbed on this side or on one
How do I wire a ceiling fan with black and white wires?
0:351:38How to wire a ceiling fan with a black and white wire coming ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo when you have one black wire coming out of the ceiling. You have to use your switches. Now so weMoreSo when you have one black wire coming out of the ceiling. You have to use your switches. Now so we have our ceiling fan switch. And our light switch.
Is the striped wire hot or neutral?
The wire with the ribbing or stripe is the neutral wire, and the other one is hot. If you don't see any markings on the wires, and the plug has two prongs of equal size, the cord is not polarized.
What color wires go together for a ceiling fan?
Black wire is for the fan. Blue wire is for the light, if light is included with the fan. White wire is neutral. Green wire is for the ground.
Is the striped wire ground?
Green – In the USA, most ground wires will be green, or at least primarily green. Green & Yellow – Some systems will use a green wire with a yellow stripe for the ground. Bare – If the wire is not primarily green, it may also just be a bare copper wire.
Which is positive black wire or black and white wire?
The “hot/positive” wire, often known as positive, is colored black. It connects the breaker panel to the switch or light source, carrying electricity. Negative refers to the white wire, which is known as “neutral.” It returns any unused power and current to the circuit breaker panel.
How do I identify a ground wire?
To tell if your home has ground wire, check your outlets. If your outlets have three prongs, then your home has ground wire. If there are only two prongs, then ground wire may not be utilized.
JimL
Right. My fan had a blue wire and a black wire. My blue is same as your black/white wire.
Carl
So, the black wire with the white stripe is connected to the solid black wire?
Uncle Monster
Don't know if he was gay, he fathered a lot of children. He raised a herd of gerbils for food you silly thing. What, are you some kind of weirdo? o_O
What Are Electrical Black and White Wires?
The white wire is connected to the hot wire termination of the fixture. Another one may be the hot wire lead and the switch’s other screw terminal. It acts as the switch loop’s second hot wire.
Which One Is Positive between Black and White Wires?
Plastic insulation is used to wrap two of the conductors in the NMB cable. The hot wire, which offers a 120 VAC current source, is black. It’s referred to as positive wire.
Black Wire
Black electrical wires are used in all sorts of circuits. Transferring energy from the power source to the outlet is accomplished via a transformer.
White Wire
The color white identifies a neutral wire. It connects to the neutral bus bar of an electrical panel.
How to Identify Wires in Typical Situations?
When it comes to identifying electrical wiring, color is the most common method. Inside, every wiring is identical, although the outside coatings vary in a diversity of colors.
4 Things to Follow While Wiring
There’s a chance you’ll want to undertake the task yourself now. But let me tell you something!
FAQs
Question: If both wires are black in color, how do identify positive or which is positive ones?
What is black wire?
Black Electrical Wires. Black electrical wires carry the current from the power source to the outlet and used for power in all types of circuits. Make sure you use extra caution when dealing with these - when you see a black wire, you know it is hot. Any circuit’s black wire should be considered live at all times.
What does it mean when a wire is white?
If you see a white wire marked with black or red (or a piece of black or red electrical tape at its ends), that means it’s acting as a hot wire and is no longer neutral. Green wires connect to the grounding terminal in an outlet box and run to the ground bus bar in an electrical panel.
What color wires are used for ceiling fans?
Yellow wires are used as switch legs to ceiling fans, structural lights, and outlets paired with light switches, while blue wires are usually used as travelers for three-or-four-way switches. The colors white and gray indicate a neutral wire. That means it connects to an electrical panel’s neutral bus bar. Once power leaves the electrical panel ...
What is the purpose of black wires?
These wires are often used as a switch leg that transfers power to switches and outlets in all circuits. Black wires are never used for a ground or neutral wire and are meant to be used as the power feed for a switch or an outlet. They are most commonly found in residential buildings. Red Electrical Wires.
What color wires are used in electrical wiring?
These are the most common colors used in electrical wiring. Other color combinations, such as striped wires, may be used for other applications. Remember, black and red wires are always hot, meaning they are source wires that carry power from the electric service panel to a destination, such as an outlet or a light.
Where are red wires found?
They are most commonly found in residential buildings. Red Electrical Wires. Red electrical wires are the secondary live wires in 220-volt circuits and are commonly found in a sheathed, multi-conductor cable.
Can you link two red wires together?
You can link two red wires together, or you can link a red wire to a black wire. Since red wires conduct current, they are considered hot. Blue and Yellow Electrical Wires. Blue and yellow wires are most commonly found in commercial buildings and are used as the live wires pulled through a conduit.
What is the difference between a black and red wire?
If the multi-colored wire is black and red, the black wire is the negative wire, while the red one is positive. If both wires are black but one has a white stripe, the striped wire is negative, while the plain black wire is positive.
How do I know if a light is a black wire or a white wire?
When you're hanging a chandelier or any other ceiling light, first find the 3 wires coming out of the hole in the ceiling where the light will go. Recognize that the black wire is the positive one, the white wire is the negative one, and the green wire is the ground. You may see a copper wire instead of a green wire for the ground.
How to tell if a wire is polar?
For those unmarked wires, you can first try to identify the polarity by looking at physical characteristics like color or texture. If you still aren’t sure, test your wires with a digital multimeter.
What is ribbed wire?
Note that a ribbed wire is usually the negative wire on an extension cord. If you have a wire where both sides are the same color, which is typically copper, the strand that has a grooved texture is the negative wire. Run your fingers along the wire to determine which side has the ribbing.
Where can I find wiring diagrams for my car?
Every car follows its own color-coding system for wires. There is no standard or international system, so find the wiring diagram specific to your make and model in your owner manual. If you no longer have your manual, look for one in a library or online. Or, reach out to a mechanic at a local shop or dealership.
Is copper wire positive or negative?
Know that the copper wire is usually positive on a speaker wire. On a standard wire used for things like speakers and amps, the silver strand is the negative wire and the copper-colored strand is the positive wire. These wires are often held together by a clear casing, so they’re easy to determine the polarity of each side quickly.
What colors of wire do electricians use?
Before pre-made cables were the norm, though, electricians would run empty tubing between the main panel and the wall and ceiling boxes and filled the tubing with a variety of different wire colors like blue, red, orange, yellow, brown, and violet —a setup still seen in older homes today.
What is the color of the 220 volt wire?
You’ll find black and red or orange wires connected to 220-volt appliances like electric water heaters, well pumps, and older electric ranges. However, those same 220-volt appliances can be wired with a black and white wire, where the white wire had been marked with black or red tape at both the appliance and in the main panel to indicate ...
What is the red wire used for?
Red can also be used as a “signal” or “trigger” wire in three-wire interconnected smoke detector applications. The trigger wire is used to activate all the interconnected smoke detectors the instant one detector senses smoke or fire. In that wiring setup, the smoke detectors get power and neutral from the black and white wires, ...
What is the purpose of red or orange wires?
Red or orange wires are often used to provide the secondary phase voltage in a 220-volt application. Always assume that a red or orange wire (in addition to the black wire, which provides the primary phase voltage) is live. You’ll find black and red or orange wires connected to 220-volt appliances like electric water heaters, well pumps, ...
What is a 2 wire cable used for?
However, when sized appropriately for the load, two-wire armored cables can also be used to provide power to 220-volt appliances like a water heater or well pump , which is where things get tricky.
What is the difference between a neutral and a hot conductor?
The hot or “live” conductor sheathed in black typically carries power to a 110-volt light or receptacle, while a neutral conductor would carry energy away and a bare copper ground wire can conduct any excess energy that might otherwise be a shock or fire hazard.
What is the white sheathing on a water heater?
A: You’re right, white sheathing does generally indicate a neutral wire, but it’s not always so simple to decipher. In this case, your water heater is probably wired with two-wire flexible armor-clad “BX” or “MC” cable—that’s a factory-made cable with a metal jacket protecting a black, white, and bare copper wire.
What is zip cord wire?
Less expensive speaker wire, often called zip-cord, indicates polarity with a raised ridge on the outside edge of one of the conductors rather than striping. You frequently find that convention on wall-wart wiring, too. Twisted pair used in network cables and some phone wiring indicates pairs and polarity with a similar scheme.
What color is polarity?
Each pair has a different base color, such as blue, green, or orange. The polarity is indicated by having one wire a solid color and the other with a white stripe on a background of the same color. Share. Improve this answer.