Black & Decker FS18C Instruction Manual
- Plug the charger into any standard 120 Volt 60 Hz electrical outlet.
- Slide the charger onto the battery pack as shown in Figure 1 and let the battery charge initially for 9 hours. ...
- Unplug charger, and remove the battery pack. Place the battery in the tool and be
Full Answer
Can You charge an 18V black and Decker battery with a 20v Charger?
So, you can use a 20V charger to charge an 18V Black and Decker battery. But you have to confirm that the charging dock accepts this particular model. Is It Possible to Rebuild Black and Decker 18V Batteries? When the rechargeable battery pack can’t run the tool long enough, what do you do with it? Do you through it away and buy a new one?
What batteries do I need for my black and Decker project?
Get your project started with the right batteries and battery chargers from BLACK+DECKER®. We've got all you need to stay powered up, including our 20V MAX* POWERCONNECT™ batteries. Choose from our selection of rechargeable tool batteries, portable battery chargers, and more to stay charged when you need it.
Can I charge my B&D hedge trimmer with 18v battery?
I bought a B&D hedge trimmer with an 18 V battery. I used it for one summer ( NE has short summers ) and when I went to charge it for use the next summer, the charger gave me the rapidly flshing light which means the battery will no longer take a charge. I took it to Home Depot, where I bought it and the salesperson said they are out of stock.
Why Choose Black+Decker® charging stations?
Keep your projects powered with BLACK+DECKER® chargers and charging stations. Whether you're deep into a DIY project or just keeping up with yardwork, you can keep a spare battery charged and ready to swap in when you need it.
How do I know when my Black and Decker battery is charged?
You can tell by the 3 lights by the power button. If they are flashing it's charging. They will be solid when fully charged.
How long does it take to charge an 18 volt battery?
Charge time will vary from 55 minutes (1.3Ah battery) through to 3 hours 20 minutes (5Ah battery) depending on the type and power of your battery.
How long does it take to charge a Black and Decker 18v lithium battery?
It would take 6-9 hours to charge a battery with the trickle charger, while the new charger fully charged one of these new batteries within three hours.
What does flashing green light mean on Black and Decker charger?
The blinking green light indicates your unit is fully charged.
How long does a Black and Decker 18V drill take to charge?
Black + Decker cordless drills are available in 12V MAX*, 18V, and 20V MAX* configurations. What is this? Most Black + Decker cordless tool batteries take between 30 minutes to 3 hours to charge to full capacity. Some batteries can take up to 3 to 6 hours to charge up when completely drained.
How do you use a 18V battery charger?
Connect the input jack from your charger to the 18 volt battery or insert the battery into the charger, depending on the type. Set the charger to the correct charge rate, if it's a variable rate charger. This needs to be set at 18 volts. Do not set it any higher: you will damage the battery.
How do I know when my Black and Decker lithium battery is fully charged?
When charging, the light will be red. Once the charging cycle is complete, the battery will not go out or change color. It will continue to stay red. Listen to the battery and charger for a light humming sound.
Why is my Black and Decker battery not charging?
If your battery is not charging and the charger is rapid flashing and the battery is warm, it may be too hot- particularly after heavy or continued use. If so, please allow the battery to cool, then reinsert the battery on charger to try charging again.
How do I know when my drill battery is charged?
Check the voltage indicator on the multimeter. A fully charged battery should test at least 1 volt higher than the voltage that is listed on the battery. For example, an 18-volt battery should test at 19 volts or higher.
Does flashing green mean charging?
Short green flash = less than 80% charged. Long green flash = more than 80% charged. Solid green light = 100% charged.
Does green light mean charging?
A red light comes on to indicate fast charging of the battery. After fast charge is done, the light turns green and the remaining 3 hour charge becomes a trickle charge, optimizing battery performance.
What does a red light on a battery charger mean?
Both the 3 amp on-board and 3 amp off-board chargers flash a steady red light if there is an abnormality with the charging system. Generally, this occurs when the charger does not receive a signal from the batteries, in other words there is a break in the connection between the charger and batteries.
How long it takes to charge a Black and Decker 18V battery?
Black and Decker is a company that makes power tools. One of their most popular products is cordless drills, which come with 18V batteries.
How to charge a Black and Decker battery?
For some Black and Decker models, you will need to find the power cord that came with your battery. Insert the battery pack in the cordless drill, plug one end of the power cord into the back of the drill, then plug the other end into an electrical outlet. You can use either an extension cord or an outlet near where you are working.
What could be the reason why a Black and Decker 18v battery won't charge?
When you use your Black and Decker 18v battery for long enough, the circuits in the battery get damaged. This damages the circuit board, resulting in not enough power to charge or discharge. Some possible causes of this include a faulty charger, an incorrect type battery charged with the wrong adapter or a short circuit in your drill.
Conclusion
It is best to always remember that there are some differences in the way batteries charge depending on what type they are.