Available sizes—Origin
| approximate opening (feet) | approximate opening (feet) | approximate opening (feet) | approximate opening (feet) | |
| 2 | 3.3 | 4.6 | 8.5 | |
| 1 door | ||||
| 2 door | ||||
| 3 door |
| General minimum and maximum dimensions for bi-fold door panels | |
|---|---|
| Minimum height | 60–70 inches |
| Maximum height | 120–145 inches |
| Minimum width | 16 inches (odd number of doors) 28 inches (even number of doors) |
| Maximum width | 420–780 inches |
How to measure an interior bifold door?
- Clear glass - maximise natural light transfer between your rooms.
- Frosted glass - if you need a bit more privacy when the doors are closed, such as for a home office.
- Blinds - Ultimate flexibility: can be quickly opened and closed depending on your needs.
What are the sizes of bifold doors?
Table of Bifold Door Sizes
- 2' 0" x 6' 8" Bifold - Two 12" Panels
- 2' 6" x 6' 8" Bifold - Two 15" Panels
- 2' 8" x 6' 8" Bifold - Two 16" Panels
- 3' 0" x 6' 8" Bifold - Two 18" Panels
- 4' 0" x 6' 8" Bifold - Four 12" Panels
- 5' 0" x 6' 8" Bifold - Four 15" Panels
- 6' 0" x 6' 8" Bifold - Four 18" Panels
What size internal bifold doors do I Need?
There are some common configurations for bi-folding doors, including:
- Inward or outward opening
- Opening in the middle or at the side
- The use of either single or French doors
How thick are bifold doors?
Sliding Doors & Bifold Doors The heavy duty, commercial grade track hardware we sell for bifold doors and sliding closet doors will work with individual doors ranging from 1.1/8″ up to 1.3/4″ thick. Almost all of the bifold doors and sliding doors that we make are 1.1/4″ since they rarely need a lock.
How much space is needed for bifold doors?
The actual dimension of bifold doors is always ½'' smaller in width than the stated size to accommodate the necessary clearance for proper operation of doors. Bifold doors must be 1-1/2'' shorter in height than the finished opening.
What is the rough opening for a 30 inch bifold door?
So, if you have a bedroom door that is 30″ wide (which is considered a 2/6 or 2′-6″ door) just add 2″ to the width and frame it 32″ wide. The height is 80″ (which is considered 6/8 or 6′-8″) add 2-1/2″ to the actual door height and frame it 82-1/2″ high.
What should the finished opening for bifold doors?
Finished opening width: allows for 1/4" on each side of opening. 1. Mask or remove any hardware (hinges, handles, etc.). Mask glass if applicable before painting or staining.
What is the finish opening for a 36 inch bifold door?
Bifold Finished Opening Widths are true to the measurement (a 3/0 is 36”, a 2/8 is 32”, a 6/0 is 72”, etc).
How do you size a bifold door opening?
Take three measurements of the width of the opening — at the top, the middle and the bottom. Then take three measurements of the height of the opening — one on each side and one in the middle. Take the smallest numbers from both sets of measurements and subtract a half-inch from each to get your final width and height.
How much smaller do bifold doors need to be than finished opening?
Bifold doors can have two or more panels with different widths. In general, the finished opening must be 1 inch higher than the doors for hardware installation and opening clearance. Also, the width of the doors is actually 1/2 inch smaller than shown to provide room for the doors to operate.
Can you use 2/24 bifold doors for a 48 opening?
Two-section bifolds are generally sold in widths to fit openings from 24 to 36 inches. Again, the doors can be trimmed slightly at the sides to fit smaller openings or filler strips can be added to the sides of the opening to close gaps. If an opening is 48 inches wide or wider, two 2-section doors are used to fill it.
Bi-fold Door Specification File
8 Security Magnum Barrel Offering the highest levels of security through unique features Available with PICK SNAP DRILL BUMP ANTI- ANTI- ANTI- ANTI-ORG378_Magnum Sticker 100x100mm.indd 1 05/11/2015 11:06
How to Determine Bifold Door Opening Size | Home Guides | SF Gate
How to Determine Bifold Door Opening Size. A bifold door consists of a pair of panels attached to each other with hinges. When you open the door, instead of swinging in or out, it folds in half at ...
Bifold Closet doors-frame size - Fine Homebuilding
Pete i just put in a bifold 36 inchs, I went through the same thing, The doors are 35 and one half and the track is 35 and 3/4. i made it 36 and 1/4, not knowing and useing 3 and 1/2 trim i had made my rough bigger, Then i installed it backwards, put the top jamb in one side and installed top track then cut jambs and pushed the jambs to the door, I dont do it everyday so i was not sure, my ...
What is the standard bifold door size?
However, a “standard” three-door set of bi-folds would be between: 80 and 96 inches in height.
What is a bifold door?
Bi-fold doors consist of several individual door panels, known as leaves. The minimum width of a single panel will depend on the configuration you choose and whether you have an even or odd number of panels.
How many panels are needed for a bifold door?
There are few limitations to the number of panels you have—the minimum is two, while there is no real maximum. Generally, bi-fold doors that accommodate around eight panels will need another track. The way in which doors are transported for delivery means the track can be no longer than around 20 feet.
How many doors does a bifold have?
Technically, the narrowest set of bi-folds you can buy has two folding doors and no lead door (the main panel that opens first and contains the multi-point locking system). However, most people opt for the three-door set—a lead door and two leaves—as they are more convenient and provide better access.
How tall is a door?
However, some manufacturers can offer door sets with heights of between 120 and 145 inches. These are designed to bear the extra weight that comes with the added frame material and larger panes of glass—however, the more glass the heavier the doors will be to open.
How much room do you need for a door fitting?
It’s very important to allow some room for fitting (called a fitting tolerance)—around half an inch. So, once you’ve measured up, the actual size of door you order will be the size of the opening minus the fitting tolerance on both the height and width.
What is Origin door?
Origin doors are custom-made so we can accommodate all types of spaces. The size chart below is simply an overview of common sizes that our customers request—it’s not an exhaustive list!
How tall should a bifold door be?
As a rule the height of the door opening needs to be 1 1/2" to 2" higher than the height of the door. When you are buying a new bifold door, there should be an opening size listed.
What type of molding is used for bifold doors?
A casing type molding is often used around a bifold door. The trim hangs over the edge of the opening to cover the gap around the edge of the door. Most bifold door openings are finished with drwyall. So the width of the opening is measured from the face of drywall on one side to the face of the drywall on the other side.
The Configurations You Need to Know for Sizing Bi-fold Doors
You need to be careful about the measurements if you’re installing one of these doors.
FAQs
The width and height of the bi-fold door need to be ½’’ smaller than the opening.
Summary
Bi-fold doors offer a diverse range of house renovation options. They come in a range of materials and sizes.
What is a bifold door?
Bifold doors are a great option if you have a closet (or planning to build one) that extends the complete length of your large room. That way, you can utilize each corner of your space efficiently. The upper part of your closet (that’s difficult to reach) can be used to store items that you don’t use quite often.
What is US Door and More Inc?
US Door & More Inc. Brings Out Amazing Collections of Residential Doors at a low cost. People these days leave no stone un turned to make their home interiors enormously beautiful with high-quality fixtures and other decorative accessories. One effective way to beautify your home from inside as well as outside is to use custom doors in a variety of sizes, styles, and artworks. If you seek wood doors or double doors of the highest quality, US Door & More Inc. is the company to consider for all your purchases.
Can you fit a bifold closet door in a compact area?
A conventional closet door would occupy almost double that space. You can even fit bifold closet doors in compact areas since they can slide back into the wall. This in turn allows for more air and natural light in your room. What’s more, is that they don’t need much maintenance.
What is a bi fold door?
A Folding Door opens by folding back in sections or panels. They are known as ‘bi-fold doors’, though most Folding Doors have more than two panels.
What is a folding door?
Folding Doors. A Folding Door opens by folding back in sections or panels. They are known as ‘bi-fold doors’, though most Folding Doors have more than two panels. They can be used as internal or external room dividers and can be made from a variety of materials.
How tall is a bifold door?
The Most Common. The majority of bifold doors are 80 inches tall. The width varies depending on available space, but openings typically graduate in 24-inch increments up to 72 inches or more.
How thick is a bifold door jamb?
Opening With Jambs. The rough opening for a bifold with jambs is framed slightly wider, to allow additional space for a door jamb on three sides. The difference in height is insignificant, since it adds only 1/4 inch. Door jambs are 3/4 inch thick, for a total of 1 1/2 inches, including 1/4 inch of space around the perimeter for shimming.
How big is a 48 by 80 door?
The required size of the finished opening for a 48-by-80-inch door is 48 by 82 inches. The rough opening should be 49 by 82 for a 48-by-80-inch door. This allows for 1/2-inch-thick drywall on both sides and at the top, 80 inches for the doors and hardware, and a 1-to- 1 1/2-inch space under the door. The space between the floor and the bottom of the door may vary depending on the type of flooring.
Can you use one size for both drywall and jambs?
One Size Fits Both. If you're not sure if you're installing drywall or jambs, it's fine to opt for the bigger jamb opening. The difference in size is not that big a deal, and it allows you the option to trim it out later with jambs or lumber of any type. Warning.
Can you add jambs to bifold doors?
Jambs or Drywall. The typical bifold door is finished with drywall only. But there's no reason why you can't add jambs if desired. If jambs are planned, the rough opening will be larger than a drywall-only opening, to allow for the jambs.
How wide is a bifold door?
Also, the width of the doors is actually 1/2 inch smaller than shown to provide room for the doors to operate.
What is a bifold door?
Architecture Lab says that bifold doors are also known as folding sliding doors, accordion doors and room dividers. Not only do they slide open but they also fold up to stack against walls for added space. Bifold doors can be made of a variety of materials. They pull out from their centers and have wheels on their bottoms or built-in tracks on ...
How do bifold doors work?
The doors fold in on themselves and then glide down the track. Bifolds are sold in pairs, with two doors that fold on one side or four parts in the middle with two doors that fold back on both sides. Other configurations are also available. They can usually open in or out and have the fittings and tracking already installed.
Where are bifold doors located?
Bifold doors provide attractive focal points in homes and commercial properties. They are often located on the rear side of homes to allow wide views of outdoor landscapes and are also used inside for pantries, closets and other small spaces, so you will need to know the finished opening size for bifold doors.
How many panels are in a door?
The two-panel doors generally come with 12-, 15-, 16- or 18-inch panels, and the four-panel doors typically come with 12-, 15- or 18-inch panels. Some manufacturers offer other sizes, and custom orders may also be available.