Full Answer
Where can I buy a combination bike lock?
Bell Sports sells many products for the bicycle enthusiast, including locks. Their combination bike lock allows you to set your own four-digit combination. Some people might find the process of resetting a bike lock tricky, but practice the steps below a few times, and you'll get the hang of it.
Which Bell locks offer the best security?
The Bell Catalyst Series U-locks offer high security. Ballistic Key Cable Locks Ballistic locks provide light to medium-security with a key cable lock.
Will a cable lock work on a bicycle?
While this is not guaranteed to work on all combination cable locks for bicycles, since designs are all slightly different from manufacturer to manufacturer. But who knows, you might get lucky and save your lock from bolt cutters.
How do I unlock my bell lock?
Always be sure to write down your combination and put it somewhere safe, in case you forget it at some point. Use your Bell lock's current combination to unlock it. Hold the lock so that its numbers are facing you. Look at the top of the lock, and you will notice a red-coloured tab.
How do you reset a bell bike lock combination?
0:452:08How to change the combination on a Bell Bike lock - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhat you're trying to do is you're trying to get this red side of it down. And over and you'll hearMoreWhat you're trying to do is you're trying to get this red side of it down. And over and you'll hear it pop and when it pops that's when you can reset the bike lock.
How do you unlock a bike lock if you forgot the combination?
1:162:12How To Unlock Cable Bike Lock Without Combination - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd let me see. And write those combination. Seven five nine eight and that's how you open one ofMoreAnd let me see. And write those combination. Seven five nine eight and that's how you open one of these combination locks.
How do I find my bell bike lock code?
0:004:06Hack a Bike Lock Combination! Forgot bike lock combo? Lost ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe've been able to solve the code so if you see here we're just gonna line it up all at once so theMoreWe've been able to solve the code so if you see here we're just gonna line it up all at once so the lock pulls out of this end. Here.
How do you find the combination to a 3 digit bike lock?
1:193:39Cracking a combination lock - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll you have to do is pull on the two ends. Not even very hard just to put some pressure in theMoreAll you have to do is pull on the two ends. Not even very hard just to put some pressure in the chamber. And then starting with the number wheel at the open. End just go through one by one.
How do you reset a 4 digit combination lock if you forgot the code?
Use the reset tool that came with the combination lock if you have it. Most locks come with reset tools, although many bike locks do not. If you don't have the reset tool, you may be able to get it from the manufacturer. If you have the reset tool, push it into the hole on the side of the lock chamber.
How do you reset a 4 digit combination lock?
0:001:16Reset the 4 Digit Master Lock Code - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo now what you'll do is open it up and turn it what is that ninety degrees. And push it down andMoreSo now what you'll do is open it up and turn it what is that ninety degrees. And push it down and you'll see there's a tiny little piece of metal. There. You if you're able to push that down.
How do you crack a combination lock?
0:045:59How to Crack Your Master Lock Combo in 3 Easy Steps - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you what you want to do is you want to put your pointer finger up here. And you want to applyMoreSo you what you want to do is you want to put your pointer finger up here. And you want to apply some pressure. So you want to pull this up and rotate this master lock.
How do you open a 4 digit lock?
TO UNLOCK ON A TRUE FOUR NUMBER COMBINATION Starting anywhere, turn the dial right (clockwise), stopping when the first combination number comes to the opening index the FIFTH time. 2. Turn the dial left (counterclockwise), stopping when the second number comes to the opening index the FOURTH time. 3.
How do you reset a TSA lock if you forgot the combination?
Just reset the combination:Set the dial to 000.Turn the shackle at a 90 degree angle from the lock position.Push the shackle down (outside of the lock).Set the desired code.Pull the shackle up.Turn it back to the lock position.
How do you pick a 3 pin lock?
0:053:26Lock Picking Decode a 3-Digit Combination Master Lock - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow this one here you just roll the dials to three digits and then it'll open and currently it's setMoreNow this one here you just roll the dials to three digits and then it'll open and currently it's set to 333. And if you just turn one of the numbers with the shackle closed now you've locked.Lock Picking Decode a 3-Digit Combination Master Lock - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you pick a 3 pin lock?
What is Bell Sports bike lock?
Bell Sports sells many products for the bicycle enthusiast, including locks. Their combination bike lock allows you to set your own four-digit combination. Some people might find the process of resetting a bike lock tricky, but practice the steps below a few times, and you'll get the hang of it.
How to lock a bike with a new combination?
Look into the opening of the lock (the part where the lock opens when you unlock it). You should see a black-coloured tab down in there. You will have to press this tab hard until you again hear a clicking sound. Lock your bike lock. Open it with your new combination.
Special offers and product promotions
Amazon Business: Make the most of your Amazon Business account with exclusive tools and savings. Login now
Product description
Combo Cable Bike Lock with protective cover to prevent scratches from Bell Sports. 8 mm x 5 feet in length Preset 4-digit combination is located on metal ring. Please remove before locking your bike. TO LOCK YOUR BIKE PROPERLY: 1. Wrap the cable around your bike frame, front or rear tire and a fixed object (bike rack, sign post, parking meter). 2.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Step 1: Set Starting Point
Get all of the same digits to line up at the starting position. You can start with any digits, but it just makes sense to start at 1. The method here is to tug at each end until you see a gap form. For example, when the first number has the correct digit, you'll notice a small gap between the first and second slots.
Step 2: Continue to Tug & Change Digits Until You See a Gap
As you can see below, once the first number reaches 3, you can notice a small gap when tugging at each end. This means we have our first combination digit.
Step 3: Use Tug Method to Find Rest of the Combination
Go down the line until you each the final number. Here, when you get the correct digit and pull on each end, your lock will open up. Pretty simple, right?
Check Out the Video
For more information, check out the full video guide below from YouTube user diilonp23. While this is not guaranteed to work on all combination cable locks for bicycles, since designs are all slightly different from manufacturer to manufacturer. But who knows, you might get lucky and save your lock from bolt cutters.
Step 1: Understand What's Inside
inside there are four rotating plates with a notch the shackle to slide through. When you scramble the lock, the plates slide to block the shackle from coming out.
Step 2: Tension the Lock
I wrapped the lock around a chair (pictured) sliding the cables apart increases tension in the system. you need tension to press the teeth of the shackle against the lock discs. this lets you feel the shape of the discs better and decide when one of the teeth isn't pressed against steel disc and is just hanging out in open air.
Step 3: Rotate the Tumblers
Start with the tumblers that are hardest to rotate first. these have the most tension. tension makes the disc's shapes easier to determine. Now, there's a couple of things to look for.
Step 4: Have Nerves of Steel
When you get it, you'll be concentrating hard and i can guarantee the lock will fly apart. Its going to startle you. Don't make this remove the idea of setting the combo to something you'll remember from your head.