If your Beko washing machine won't start, there's an easy reset process to follow:
- Locate the start, pause and cancel buttons
- Press them all down at the same time for around 3-5 seconds
- Your machine should now be reset
How to reset a Beko washing machine?
- Faulty pressure switch: there is a pressure switch inside which tells the machine when the cycle is over. ...
- Faulty interlock: if that doesn't help, your interlock may be at fault. ...
- Faulty hinges in a top loading washing machine: the hinges on your washing machine's lid may have worn down. ...
How to cure dispenser problems in a Beko washing machine?
To test that your water supply is strong enough:
- Turn on the cold tap situated nearest to where your Beko washing machine is installed.
- Measure the water flow rate. At least one litre in seven seconds is required.
- If the flow rate is less, you need a plumber to check your water line.
How reliable is Beko?
The warranty is subject to the following conditions:
- You need to register your product
- The product must be in normal household conditions
- The freezer or fridge must be bought through an authorized dealer or reseller
- The warranty is not transferable
How to replace the heater on a Beko washing machine?
- The machine will be displaying the error
- Check the door is shutting correctly.
- Strip down the machine to get access to the door interlock.
- Check wiring harness for signs of burnt connections or broken wires.
- Replace door lock is faulty.
- Reassemble the washing machine test the machine and make sure it starts. If all is ok problem is fixed
What is the most common problem with washing machine?
7 Common problems with washing machineWashing machine not starting. ... Washing machine is noisy. ... Excessive vibrations during operation. ... Washing machine making noise when draining or not draining at all. ... Washing machine over-filling or under-filling. ... Washing machine not spinning. ... Water leaking from soap drawer.
Can I reset my Beko washing machine?
If your Beko washing machine won't start, there's an easy reset process to follow: Locate the start, pause and cancel buttons. Press them all down at the same time for around 3-5 seconds. Your machine should now be reset.
How do you run diagnostics on a Beko washing machine?
0:043:56So we'll just do it again press the start button turn the machine on with the dial set to the 12 o'MoreSo we'll just do it again press the start button turn the machine on with the dial set to the 12 o'clock position. You will either now see an error code or a number will be displayed.
How do I reset my Beko machine?
Try resetting the appliance by pressing and holding the start/pause/cancel button for three seconds.
Why is my Beko washing machine not spinning or draining?
The most probable cause is a clogged pump filter. The pump filter should be cleaned every three months or when it's clogged. This filter is installed to catch foreign objects like buttons or coins, and to prevent these items from entering the drain hose.
Why does my washer get stuck on the wash cycle?
If your top load washing machine (or some older front load washers) is stuck on one continuous cycle and will not advance and forward to the next wash cycle, then most likely the washer timer is faulty and needs replacement. The timer on your washing machine controls all aspects of the wash, spin, and rinse cycles.
How do I display Beko error codes?
0:003:22Then what you need to do is press the start pause button to run it through the test mode first ofMoreThen what you need to do is press the start pause button to run it through the test mode first of all it comes up with 57 I presume that something to do with the runtimes. Everything then flashes.
How do I find my Beko error code?
The Beko error code system is very simple it goes from E1 to E18, if you can correct the error yourself then you'll simply need to hold down the start button to clear the error code. Remember though if you can't correct the error or aren't confident enough to attempt it then we can help!
How do you put a washing machine in self test diagnostic mode?
0:000:48You press the start button this will allow your washing machine to go into the test or diagnosticMoreYou press the start button this will allow your washing machine to go into the test or diagnostic mode and this will isolate if you're having any issues the water will run the spin cycle will engage.
How do you reset washing machine?
1:173:47The machine gives you 30 seconds to lift the lid and close. It six times and once you start liftingMoreThe machine gives you 30 seconds to lift the lid and close. It six times and once you start lifting the lid. You have 12 seconds to do the six repetitions.
Why is my Beko washing machine flashing?
The fabric softener/conditioner light on my Beko washing machine is flashing. This happens if the selector dial is turned during a programme. To stop the fabric softener light on your Beko washing machine from flashing, turn the selector dial back to the original programme.
Why does my Beko washing machine keep stopping?
Laundry that's unevenly distributed inside the drum might cause damage to your washing machine. To prevent this, Beko washing machines will automatically inspect the load and stop the spinning process if it's distributed unevenly inside the drum. Try stopping the machine, draining the water and rearranging the laundry.
How to reset a Beko washing machine?
Your Beko washing machine does not start. If your washing machine doesn’t start, hold the start, pause and cancel buttons down for about three to four seconds. This should reset the machine and allow you to continue. If it does not work you may have to call out an engineer.
Why isn't my washing machine rinsing?
The machine isn’t rinsing properly. This is normally because the drain pump filter is blocked. Open the cover of the filter on the bottom right side of the machine, careful to collect the water. Open the filter housing carefully to stop water from flooding out and then clean it under the tap.
Why is my washing machine not filling with water?
The machine is not filling with water. The main reason this occurs is if the hose is twisted or blocked in some way. Pull the machine out and make sure there is no problem with the hose. If this doesn’t fix the issue, you will need to call out an engineer.
Why is my spinning machine not spinning?
The machine is not spinning. If the load in your machine is not distributed properly it can affect the spinning function. This occurs if you have a mix of items in the drum including heavy towels and woollen jumpers as well as lighter items like underwear. This imbalance stops the spin cycle from getting to full speed.
Why won't my Beko washing machine turn on?
If your Beko washing machine will not switch on, there could be an electrical fault. Here’s how to test that: Do not plug your washing machine into an extension socket, only ever plug your washing machine into a mains wall socket. Test that the power socket is working by plugging in something you know is working, a light for example.
How to check water pressure in a Beko washing machine?
To test that your water supply is strong enough: Turn on the cold tap situated nearest to where your Beko washing machine is installed . Measure the water flow rate.
How to check if Beko washing machine is child locked?
If your Beko washing machine will turn on but you can’t use any of the buttons, here’s how to check if childlock is on: If your washing machine has a digital display it will tell you that childlock is on when you press any button by displaying C ON. To turn off the childlock function, press and hold the button or two buttons indicated with ...
What to do if your washing machine won't turn on?
If your washing machine does not turn on when connected to the power, replace the 13amp fuse in the plug. If the issue is still not resolved there may be an electrical fault.
How to clean a pump filter?
Just follow these steps: Put down a towel or similar to protect your flooring and have a container to hand to catch any water that leaks out when you remove the pump filter. The pump filter is housed behind a flap on the front of the machine.
Can you overload a Beko washing machine?
Overloading and even underloading your Beko washing machine can cause noise and drainage problems when you run a washing program. Here are some tips for correctly loading your machine to get the best results: Avoid putting just one, highly absobant item of laundry into your washing machine – such as a dressing gown or towel.
Beko Washer Troubleshooting
If you're looking for help fixing your Beko Washer, look no further! Our comprehensive Beko Washer Troubleshooting guide will explain common issues, provide tips, and show you how to read your model's error codes.
Questions or comments? Get in touch
A Appliance Helpers representative is available for you 7 days-a-week including Holidays!!
Why won't my Beko washing machine open?
If your Beko washing machine door won't open, you potentially have a very messy problem on your hands. The first thing you'll need to do is make sure that your machine isn't still full of water:
Why is my Beko washing machine not spinning?
Beko washing machine not spinning. A non-mechanical problem which might be affecting your machine's ability to spin might be the type and size of load you've placed inside it. Try not to overload or chronically underload your machine.
What to do if the "on again off again" approach doesn't work?
If the simple “on again off again” approach doesn't work, you'll probably need an engineer. Otherwise, you'll be left trying to wedge or wangle the door open, which is an easy way to break it.
Is a Beko washing machine non-mechanical?
But there may be a simple – i.e. a non-mechanical – solution to your problem. Here are five common Beko washing machine problems and what you can do about them without resorting to getting out your screwdriver:
Installation
Watch this step-by step video guide to help you unpack and install your new Beko washing machine or click on the links below for guides on specific queries.
How to Use
These step-by step guides will show you how to get the best results from your Beko washing machine, from the best programs to use, to how much laundry to put into the drum and how to change or cancel programs.
Maintenance
These guides will show you how to keep your Beko washing machine clean, hygienic and ready for use.
Troubleshooting
If your Beko washing machine is not giving you the best results, there might be an issue that is stopping it from working correctly. These how-to guides will help you work out what might be causing any issues and show you how to solve potential problems.