Bathroom Sizes (Dimensions Guide)
- Average Bathroom Size. Bathrooms with complete plumbing fixtures average from 41 to 110 square feet. Of course, the...
- Minimum Bathroom Size. So, how small can you go with a bathroom? The answer to this is mostly determined by the...
- Master Bathroom Size. The master bathroom is a large full bathroom attached to the master bedroom and can...
Full Answer
What are the standard dimensions of a bathroom?
Rectangular and oval
- Small: From 15 to 20 inches long and nine to 12 inches wide, with a depth between 5-3/4-in. and seven inches.
- Medium: From 20 to 30 inches long, 19 to 24 inches wide and about seven inches deep.
- Large: From 30 to 50 inches long, 19 to 24 inches wide and about five inches deep. ...
What is the size of a typical bathroom?
The average size of a full bathroom in the US is five by eight feet, or 40 square feet. The average size of a primary bathroom in the US is 115 to 210 square feet, with an average of 160 square feet. The average size of a half bathroom in the US is 20 square feet, though they can range from 18 to 32 square feet in size.
What is a good size master bathroom?
Shower Sizes (Bathroom Dimensions Guide)
- Standard Shower Sizes. ...
- Shower Enclosures Sizes. ...
- Shower Base Sizes. ...
- Walk-In Shower Sizes. ...
- Standard Tub Shower Size. ...
- ADA Shower Size. ...
- Shower Door Sizes. ...
- Types of Shower Doors. ...
- Average Shower Curtain Size. ...
- Shower Liner Sizes
What are standard bathroom measurements?
The report focuses on Global, Top 10 Regions and Top 50 Countries Market Size of Bathroom ... Besides the standard structure reports, we also provide custom research according to specific requirements. 2.1 Global Bathroom Master (Volume and Value) by ...
What are typical bathroom dimensions?
The average size of a full bathroom in the US is five by eight feet, or 40 square feet. The average size of a primary bathroom in the US is 115 to 210 square feet, with an average of 160 square feet.
How much space do you need between toilet and shower?
Plan a clear floor space of at least 30 inches from the front edge of all fixtures (lavatory, toilet, bidet, tub, and shower) to any opposite bath fixture, wall, or obstacle. Code Requirements: A minimum space of 21 inches must be planned in front of the lavatory, toilet, bidet, and tub.
How big should a bathroom be Australia?
The average powder room with a toilet and small vanity is 2m x 1m in size. A typical bathroom is 3m x 2m, a regular one 3.5m x 2.5m, and a large one 4m x 5m in size. You can fit a shower chamber into a 900mm x 900mm footprint, but a 900mm x 1200mm area is far more pleasant.
How far does toilet need to be from vanity?
Toilet placement A toilet should have some elbow room between it and another fixture or vanity. The NKBA's recommendation is at least 18″. Codes allow a minimum distance of 15″.
How much room do you need for a toilet in a bathroom?
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.
What is a good size family bathroom?
Family Bathroom: Typically you will need around 2,000mm x 2,000mm to create a functional family bathroom. This will usually comprise of a bathtub with an overhead shower, a wash basin, a toilet and some practical furniture such as wall mounted storage.
How small can a bathroom be Australia?
Bathroom Size The design and floor space of your bathroom should be enough to fit in a shower cubicle (usually 900 x 900mm), toilet, and a basin. Smaller bathrooms are usually 1.5m x 2m, but you can go as big as 3.2 x 2.5m, budget and space permitting.
What is a good size for a small bathroom?
SMALL: A small bathroom is typically around 35-40 square feet. While space is definitely at a premium in a small bathroom, decorating this area can be a valuable and exciting interior decorating lesson in maximizing space and utilizing color to liven up the room, but also to visually enlarge it.
Average Bathroom Size
Bathrooms with complete plumbing fixtures average from 41 to 110 square feet. Of course, the bigger your home, the larger your bathrooms will be. An average full bathroom consists of a bathtub, shower, sink, and toilet. Add to that the storage space for towels and toiletries. Others opt for the bathtub-shower combo to save space.
Minimum Bathroom Size
So, how small can you go with a bathroom? The answer to this is mostly determined by the bathroom’s layout as well as the overall dimensions of your house.
Master Bathroom Size
The master bathroom is a large full bathroom attached to the master bedroom and can typically be used by two people at the same time. Just as the master bedroom is the largest in the house, the master bathroom is also the biggest in your residence.
Average Master Bathroom Size
In a sizable home, the average master bathroom is between 60 and 100 square feet. With this amount of space, you can fit a lot of things including the following:
Half Bathroom Size
Compared to the master bathroom, a half bathroom or a powder room only has two plumbing fixtures. Typically, a half bath has a toilet and a sink and therefore doesn’t require too much space.
Minimum Half Bathroom Size
The minimum size for a half bathroom is 3 x 6 feet or 18 square feet. While admittedly small, a half bathroom of such dimensions will be able to fit a sink, toilet, and extra storage space, with a little bit of creativity.
Small Bathroom Size
There are smaller bathrooms than full and three-quarter bathrooms: the half bathroom and the quarter bath.
How big is a bathroom?
Newly built homes in the United States usually have full bathrooms that are a minimum of 5 feet wide by 8 feet long (1.52 meters x 2.43 meters). This size is designed to allow the minimum amount of space needed to accommodate a standard size toilet, sink, and shower/tub combo.
How wide is a bathroom sink?
A bathroom sink with a cabinet below must be 30 inches wide by 21 inches deep. The sink must also have 21 inches of clearance in front to stand in. While those are the minimum dimensions, you may find that a 40 inch wide countertop with 30 inches of front clearance is more comfortable to use.
How big is a shower?
Shower Dimensions. The minimum size shower that can be installed in a bathroom is 30 inches wide by 30 inches deep. For the average size person, this shower may be small and uncomfortable. We suggest installing a shower that is at least 36 inches by 36 inches, if not larger.
How long is a shower and tub?
A standard combination bathtub and shower is 60 inches long by 31 inches wide. Free standing tubs can be found in a wide range of sizes, but the most common are designed to fit within this standard footprint.
How big is a toilet?
For reference, the most common toilet size in the United States is about 18.75” wide with a depth of 27.5”. Most toilets are about 26” tall with a seat height ...
What is a half bath?
Half-Bath Dimensions. A half bath is defined as a bathroom that has a sink and toilet but no bathtub or shower. These are also called a powder room or guest bathroom. The dimensions of a half-bath can get as small as 3 feet by 6 feet or even 5 feet by 5 feet.
How big is a bathroom?
An average sized bathroom is anywhere between 36-40 square feet for an apartment or small home. This size is the general size as it encompasses both ¾ baths as well as full baths, giving you just about enough room for a shower, a bath, a sink and a toilet. For a larger home, the average size fluctuates between 40-100 square feet depending on ...
How many square feet are needed for a bathroom?
For a shower, to be installed, at least 30-36 square feet is required. For a full bath consisting of both a shower and a bathtub, you will need at least 40 square feet . Below are common bathroom size layouts ranging from small, medium and large.
How big is a handicapped bathroom?
Handicapped bathrooms require at least 3×5 or 15 square feet to be considered a handicapped accessible bathroom. The size itself is not so important, more that the room is a diameter of 5 inches, allowing a wheelchair to move freely without being stuck. The doorway to this bathroom has to be at least 32-36 inches or 2.5 feet wide. The sink cannot be higher than 36 inches high with no more than 2 inches of counter space in between. Lastly, the toilet must be between 17-19 inches off the floor. The handle cannot be higher than 44 inches off the floor. Safety bars and other hand hold supports are also required for a handicap assisted bathroom.
How wide is a bathroom door?
The doorway to this bathroom has to be at least 32-36 inches or 2.5 feet wide. The sink cannot be higher than 36 inches high with no more than 2 inches of counter space in between. Lastly, the toilet must be between 17-19 inches off the floor. The handle cannot be higher than 44 inches off the floor.
How many yards should a walk in shower be?
For the purposes of most walk-in showers, the length needs to be around 4 yards at least to support the walk-in shower. From this point, the dimensions are the same as a bathroom with a shower-medium sizes are around 50 square feet, large sizes are 60 square feet and beyond.
How big is a shower?
The common dimensions for this size is either 9×3 or 8×4 which consists of the small range of things. Medium sizes are around 50 square feet with large sizes landing around 60 square feet and beyond.
What is the difference between a 5x8 and a 6x10 bathroom?
As stated previously, 5×8 is the small dimension, whereas 6×10 is considered the average for a full bathroom, with 10×12 and beyond on the larger side.
How wide should a bathroom door be?
Label and measure doors and windows, while also marking the direction they open on the floor plan. For reference, doors should be at least 32″ wide?or 34″ in an accessible bath space. Identify and measure unmovable obstructions, fixed features, or anything you’re keeping in the new bathroom space.
How wide should a shower be?
If you do have a curb/threshold on your new shower, it should be 3-4″ high and 4-6″ wide.
How deep should a medicine cabinet be?
Medicine Cabinets: Your bathroom medicine cabinet needs to have at least 4-5 inches in overall depth, with interior shelving no smaller than 3 ½ inches. Prebuilt medicine cabinets are standard-built at about 18″ wide by 30″ tall.
How to make a bathroom floor plan?
In addition, you’re going to want to follow a few basic steps to get the starting measurements that you need to create a bathroom floor plan: Measure the overall room to put together a detailed diagram of the space. Label and measure doors and windows, while also marking the direction they open on the floor plan.
How far should a bathtub be from the floor?
Whatever the style, you should have the bathtub controls placed 33″ from the floor for convenience.
What to do once you know where your tub, shower, sink, and toilet are going?
Once you know where your tub, shower, sink, and toilet are going, you can start measuring for other elements that you want to have in your new bathroom! There are several features that can enhance the functionality and style of a bath?as long as you plan ahead to make room for the improvements.
How high should towel bars be?
Towel Bars: There’s no hard-and-fast rule about measuring the height of towel bars, but you will typically mount them between 36-42 inches above the floor along a horizontal centerline. If you have tall family members or large towels, you can raise them to a height of 48-50 inches.
How big is a bath?
Bath. The average bath measures 170cm long x 70cm wide, but you will find a bath size to suit most bathroom shapes and sizes. A bath 130cm long x 70cm wide is no larger than a generous shower tray, but will allow the most die-hard bath fan a good soak in a compact bathroom.
How deep should a toilet pan be?
Leave at least 15cm between the bottom of the pan and the floor for easy mopping. The toilet pan will typically average about 52cm in depth, in front of which you will need to leave at least 60cm clear for passage.
How long should a shower tray be?
A tray at least 150cm long will be needed to achieve this.
How much space between sink and wall?
Whatever sink you choose, you should allow at least 60cm between the front of the sink and the wall or any other fitting opposite for passage. Robertson Lindsay Interiors. Save Photo.
How high should a toilet pan be above the floor?
Cleaning the floor is so much easier too. You can vary the height of the pan to suit your personal taste, with a height of 50cm above the floor a good average. Leave at least 15cm between the bottom of the pan and the floor for easy mopping.
What is the key consideration when choosing a tap with a spout?
A key consideration is to choose a tap with a spout appropriate to the design of the sink. For instance, a short spout on a flat-bottomed, large basin, as opposed to a basin with a slanted base, may lead to the sink-bed not being cleared properly after each use. This can lead to a build up of scum and grime.
How much space do you need for a toilet?
There must be at least 24 inches of space in front of the toilet, although it's OK for a door to swing into this space. Sinks and vanity sink tops range from 20 to 30 inches in width. A standard bathtub is 60 inches long by 32 inches wide. If your plans call for a larger tub, alter the layout to fit it.
What is a wet wall in a bathroom?
Most homes will have a "wet wall," which is an interior wall that is thicker than most walls because it contains water lines and the main stack.
What to know before deciding on shower head?
Before deciding on a shower head, there are a few more important decisions to be made in a bathroom remodel. Specifications for the placement of plumbing fixtures and the dimensions of pipes are intended to make the bathroom a comfortable space with plenty of capacity for incoming water and outgoing drains and vents.
Where do I tie a bathroom drain?
If the new bathroom is on the first floor, you can probably just tie into the house's main drain line in the basement or crawlspace below. If the new bathroom is on the second floor, the bathroom's main drain will have to travel through the wall on the first floor and down to the basement or crawlspace.
Can a tub fit in a small opening?
If the opening is any smaller, the tub will not fit; if the opening is more than 1/4 inch too long, making a tight seal along the wall will be difficult. Framing must be almost perfectly square. Bathroom Layout Guidelines and Requirements.
Can you run a 3 inch drain through a joist?
However, it may be difficult to run a toilet's 3-inch (or 4-inch) drain to an existing line, especially if you have to go through joists. In the room below the installation, the drain lines turn outward at 45-degree angles to avoid running 3- or 4-inch pipe through studs.
What is the standard size of a walk in shower?
The usual dimensions of a standard walk in shower are 34 inches x 34 inches, 36 inches x 36 inches and 42 inches x 36 inches; these sizes, of course vary depending on the size of the bathroom. A comfortable walk in shower size would have an average ...
How big is a shower?
The smallest and most compact shower unit measures 32 x 32 inches; and can go up to 34 x 34 inches and 36 x 36 inches. These types of shower can be installed in the corners of your bathroom and for bathroom which doesn’t have enough space, this square-shaped shower can also be installed along one wall.
What is the standard size for a shower stall?
The standard size for a shower area without the tub is 48 x 36 inches . This size has a minimum space wherein it gives you more room to move around.
How wide is a shower door?
Most of the standard shower doors are between 22 and 36 inches wide and the average height of a shower door is 72 inches.
How deep should a shower seat be?
ADA also recommends depth should be a minimum of 15 inches to 16 inches from the seat wall, and the seat rear edge should have a maximum of 2 ½ inches. A corner L-shape seat usually require 14 inches to 15 inches seat depth. A shower foot stool can be 10 inches to 13 inches minimum surface up to maximum of 15 inches.
What is the most important part of a bathroom?
The shower area is the most essential part of the bathroom and when it comes to investing on a new shower upgrades or remodeling your bathroom; one important factor to consider is knowing the standard size of a shower.
Can you use a shower bench in a bathroom?
Shower benches can be incorporated when designing showers. They make a great and functional feature for a bathroom. The seat of the bench should be comfortable enough and at the same time should leave enough space for the shower area.