3 Uses for Bacteriostatic Water
- Dilution Agent for Vial Medications.
- Solvent for Medications.
- An Additive for Evaporative Humidifiers.
What should I know about bacteriostatic water before using it?
What You’ll Need for Injections:
- A Sterile Syringe
- An Alcohol Wipe
- Your Reconstituted Peptide
- Disposable Gloves (optional)
Which one to pick bacteriostatic water vs sterile water?
Taking peptides, you have a choice between Bacteriostatic Water vs Sterile Water. Both of these types of water are sterile; there is a vast difference between the two of them. What is bacteriostatic water? Bacteriostatic water is a purified and sterilized type of water. For example that is used to dilute peptides meant for injection.
Does bacteriostatic water go bad?
Bacteriostatic water does have a shelf life, and it should be discarded after 28 days since the benzyl alcohol can lose its potency after this time. Can you use sterile water for injection? Sterile Water for Injection, USP, is sterile, nonpyrogenic, distilled water in a single dose container for intravenous administration after addition of a ...
What is the best way to store bacteriostatic water?
- First, start by taking an alcohol pad and wiping the rubber stopper located on the first vial. ...
- Make sure to pull back the syringe plunger in order to equalize the air present within the syringe with the volume that needs to be withdrawn from the drug vial.
- Put the needle at the top of the vial without inverting it. ...
What can bacteriostatic water be used for?
Bacteriostatic Water (bacteriostatic water for injection) is sterile water containing 0.9% benzyl alcohol that is used to dilute or dissolve medications; the container can be reentered multiple times (usually by a sterile needle) and the benzyl alcohol suppresses or stops the growth of most potentially contaminating ...
What is the difference between sterile water and bacteriostatic water?
Answer: Bacteriostatic water differs from sterile water by the addition of benzyl alcohol as a preservative with a final concentration of 0.9%. Benzyl alcohol can be a topical irritant but in the concentration of 0.9% does not typically cause irritation and may provide some anesthetic effects.
Do you need to refrigerate bacteriostatic water?
There are no special rules that need to be followed as far as discard. Keep your unused bacteriostatic water in the container it arrives in. Store the container in a dark place with a residual, resting room temperature that doesn't exceed 80 degrees Fahrenheit and doesn't drop below 60 degrees Fahrenheit.
Is bacteriostatic water toxic?
Benzyl alcohol, a preservative in Bacteriostatic Water for Injection, USP has been associated with toxicity in neonates.
Can I buy bacteriostatic water at a pharmacy?
If you are needing bacteriostatic water for a medication today, you can shop around at various local pharmaceutical retailers, such as Walgreens, CVS, or Walmart. Their pharmacies should have bacteriostatic water in stock and have trusted suppliers for this product.
How long is bacteriostatic water good for once opened?
28 daysHospira, the world's leading manufacturer and supplier of bacteriostatic and sterile water, advises that once a vial of bacteriostatic water is open, the preservatives will prolong its life for up to 28 days. After this period, the vial should be discarded.
Is bacteriostatic water prescription only?
Bacteriostatic Water is a prescription medicine used to dilute or dissolve medications. Bacteriostatic Water may be used alone or with other medications. Bacteriostatic Water belongs to a class of drugs called Sterile Irrigating Solutions.
How do you add bacteriostatic water?
2:523:51How to reconstitute HCG and Peptides - YouTubeYouTubeStart of suggested clipEnd of suggested clipWater to the hcg vial. So what you're going to do again is carefully insert the needle into theMoreWater to the hcg vial. So what you're going to do again is carefully insert the needle into the rubber tip. And you're gonna slowly inject the bacteriostatic water into the HCG vial immediately.
Is 0.9% sodium chloride the same as bacteriostatic water?
Bacteriostatic 0.9% Sodium Chloride Injection, USP is a sterile, nonpyrogenic, isotonic solution of sodium chloride in water for injection. Each milliliter (mL) contains sodium chloride 9 mg and 0.9% (9 mg/mL) benzyl alcohol added as a bacteriostatic preservative. May contain hydrochloric acid for pH adjustment.
Can you use bacteriostatic water for Botox?
TIP: Always use bacteriostatic normal saline as the diluent as per manufacturer guidance. Reconstituting with sterile water can cause the client great discomfort during treatment.
How long is sterile water good for?
A container label that states “single dose container” on any bottle of sterile irrigation fluids indicates that once opened, any unused fluid must be immediately discarded.
What is reconstitution solution used for?
The process of adding a solvent or diluent to a medication in powdered form to dissolve it and form a solution is referred to as reconstitution. Reconstitution is necessary for medications that come in powdered form before they can be measured and administered.
Can I use sterile water instead of bacteriostatic water?
It depends on the application. Sterile water is used for irrigating wounds and injecting medications, but it cannot be used more than once. Bacteri...
Is it safe to inject bacteriostatic water?
It is only safe to inject bacteriostatic water when it is diluted with the appropriate medication and aseptic techniques are closely followed. Inje...
What is the difference between bacteriostatic and sterile water?
Sterile water has been cleared of any contaminants, but it does not contain any antibacterial agents. Therefore, it can only be used once. Bacterio...
Bacteriostatic Definition
What does bacteriostatic mean? Bacteriostatic is a term used to describe any agent or substance that has the ability to prevent bacterial growth. Bacteriostatic solutions differ from bactericidal solutions in that bactericidal agents have the ability to kill bacteria.
Bacteriostatic Water
What is bacteriostatic water? Bacteriostatic water is a sterile solution that contains 0.9% benzyl alcohol. Benzyl alcohol is an aromatic organic molecule with a six-membered ring and one hydroxymethyl (CH 2 -OH) attachment. The alcohol is an added preservative that contributes to the solution's bacteriostatic nature.
Bacteriostatic Water for Injection
Primarily, healthcare professionals use bacteriostatic water for injection purposes. Most drugs must be diluted to their proper concentrations before being introduced to the human body. This is to ensure that the drug is not administered at levels that may be toxic to the patient.
Potential Side Effects of Bacteriostatic Water
There are not many side effects associated with using bacteriostatic water. When there are side effects, it’s probably more related to the drug that is dissolved in the bacteriostatic water, or some sort of contamination of the water prior to use.
Difference Between Sterile Water and Bacteriostatic Water
While both bacteriostatic and sterilized water are sterile liquids, they do have some differences you should be aware of. You cannot simply replace bacteriostatic water with sterile water as they are not the same thing.
What is bacteriostatic water?
Simply put, this product is sterile, non-pyrogenic water that is used for injection. It has 0.9% benzyl alcohol which is added to a bacteriostatic preservative.
Mixing it with medication
Mixing medication with bacteriostatic water is a pretty straightforward process, and if you have experience with drugs, there is a good chance you’ve already done this:
Potential side effects
The most common side effects that may occur when you use bacteriostatic water actually don’t have anything to do with the product itself. Instead, the most common problems have to do with the syringe and the potential irritation that it causes.
Where to buy bacteriostatic water?
These products are generally the same, no matter where you buy them. So, here are some of the things you need to pay attention to:
What is bacteriostatic water?
Bacteriostatic water is both a bacteriostatic agent and a key ingredient in laboratories, hospitals, and research centers around the world. Bacteriostatic agents have been used for as long as modern medicine has been practiced. These agents are used to prevent the growth of bacteria in different formulas, canisters, containers, and utensils.
How long can you keep bacteriostatic water?
If your vial has been opened, you should make sure to use the water within a month.
How to get bacteriostatic water out of a syringe?
Insert the needle tip into the sealed bottle of bacteriostatic water. Slowly extract the bacteriostatic water until the solution reaches the desired level visible in the syringe body. Gently remove the needle from the bacteriostatic water vial. Penetrate the medication’s vial, as gently as you can.
How to remove bacteriostatic water from a pipette?
Put the pipette’s tip into the destination vial/bottle’s mouth and slowly expel the bacteriostatic water. (Do not expel the water too quickly; Air bubbles are bad!) Remove the pipette tip and discard or place it in the sterilization chamber.
How to get bacteriostatic solution out of pipette?
Gently squeeze the pipette’s bulb before inserting the pipette tip into the bacteriostatic water. Gently insert the pipet tip into the bacteriostatic water. Very slowly relax your grip on the pipette’s bulb until the solution reaches the desired level visible in the pipette tip. Slowly bring the pipette tip out of the water while keeping ...
What to consider before giving bacteriostatic injection?
It’s best to consider what other medications are going to be in a patient’s bloodstream before giving a bacteriostatic water-rich injection. Consulting with a pharmacist, other doctors, or the FDA is suggested before mixing medications.
Can a fetus be exposed to water?
We already know how serious exposure can be to a fetus but there is little concern for an adult human. Unfortunately, several animals aren’t quite as lucky. Much like a human infant or fetus, smaller animals suffer from all the same toxic effects. Consider using sterile water as a substitute for animals and infants.
What is bacteriostatic water?
So, what is bacteriostatic water? It’s a bacteria inhibiting form of water used daily in hospitals across the globe. It allows medical workers to safely dilute and dissolve life-saving medications to all the patients who need them.
Can you give a baby bacteriostatic water?
Bacteriostatic water should never be given to a baby under a month old. Benzyl alcohol can cause serious issues in young kids, such as encephalopathy, metabolic acidosis, and respiratory depression. Ultimately, it can result in death.
What is sterile water?
Sterile water simply put is purified, distilled water with no preservatives or added and no microbial growth. It is also nonpyrogenic, meaning that it won’t cause fevers when in use. The pH or acidity level of sterile water is between 5.0 to 7.0. Now that you have a clear cut definition of sterile water, let’s look at the medical uses first ...
How does a neti pot work?
The neti pot is a system in which water is inserted in one nostril via a specialized pot or bottle and flushed throughout the sinuses and out the other nostril. This method is in close proximity to the brain and major blood vessels which can pose as a huge contamination and infection point. Many patients mix the neti pot saline packets ...
Can sterile water be used in everyday life?
What can’t it be? Sterile water has a myriad of uses in medical and everyday applications. Let’s first discuss what it isn’t. Many people confuse sterile water for other potable water preparations such as bacteriostatic water, dextrose water, bottled water, and saline water. Despite sharing a few similarities, these water sources are not equivalent ...
Can sterile water be stored?
Lastly since sterile water is microbial free in nature, exposure to body, surroundings, and other factors can easily contaminate the sample. Sterile water is meant as a one time use and bottles should not be stored away once opened.
Can you drink sterile water?
In short, you can drink sterile water although it is not preferred. Not only is it costly and bland to taste, but it also has no electrolytes to truly quench your thirst. Drinking excess amounts can cause pH changes and electrolyte imbalances which lead to more serious bodily dangers.
Can you use sterile water for a solo injection?
Irrigation use of sterile water includes washing, rinsing, and dilu tion.
Can you inject sterile water alone?
Injection use includes the various degrees of penetration such as intramuscular (in the muscle), intravenous (in the veins), and subcutaneous (under the skin).It is important to note that sterile water must be mixed with another medicine and never injected alone. Solo injection use will cause hemolysis, or the breaking up of red blood cells.
What are the reactions that may occur because of this solution, added drugs or the technique of reconstitution or administration?
Reactions which may occur because of this solution, added drugs or the technique of reconstitution or administration include febrile response, local tenderness, abscess, tissue necrosis or infection at the site of injection, venous thrombosis or phlebitis extending from the site of injection and extravasation.
Can bacteriostatic water be used for pregnancy?
Pregnancy: Animal reproduction studies have not been conducted with Bacteriostatic Water for Injection. It is also not known whether Bacteriostatic Water for Injection containing additives can cause fetal harm when administered to a pregnant woman or can affect reproduction capacity.
Can you use Bacteriostatic Water for intravenous injection?
Do not use Bacteriostatic Water for Injection, USP for intravenous injection unless the osmolar concentration of additives results in an approximate isotonic admixture. Consult the manufacturer's instructions for choice of vehicle, appropriate dilution or volume for dissolving the drugs to be injected, including the route and rate of injection.