What is bacteriostatic water?
What is Bacteriostatic Water? Bacteriostatic Water for Injection is sterile, non-pyrogenic water that contains 0.9% benzyl alcohol (9mg/mL) added as a bacteriostatic preservative. This preparation of sterile water and benzyl alcohol (BnOH) allows repeated withdrawals to be made from a single 30mL plastic vial.
What is the USP for bacteriostatic water for injection?
Bacteriostatic Water for Injection, USP must be made approximately isotonic prior to use. Benzyl alcohol, a preservative in Bacteriostatic Water for Injection, USP has been associated with toxicity in neonates. Data are unavailable on the toxicity of other preservatives in this age group.
What are the different methods of bacteriostatic water application?
This is one of the most common application methods for bacteriostatic water solutions. It involves injection straight into the veins. There are countless conditions that require this, from heart-related issues to arthritis. Subcutaneous injection involves injecting a substance right under the skin.
What are bacteriostatic agents?
Bacteriostatic agents have been used for as long as modern medicine has been practiced. These agents are used to prevent the growth of bacteria in different formulas, canisters, containers, and utensils.
What are the ingredients in bacteriostatic?
Bacteriostatic Sodium Chloride Injection, USP, 0.9% is a sterile, nonpyrogenic, isotonic solution. Each mL contains: Sodium chloride 9 mg; benzyl alcohol 0.9%; Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (pH 4.5-7.0).
Is 0.9 sodium chloride the same as bacteriostatic water?
Bacteriostatic 0.9% Sodium Chloride Injection, USP is a sterile, nonpyrogenic, isotonic solution of sodium chloride in water for injection. Each milliliter (mL) contains sodium chloride 9 mg and 0.9% (9 mg/mL) benzyl alcohol added as a bacteriostatic preservative. May contain hydrochloric acid for pH adjustment.
Can I use sterile water instead of bacteriostatic water?
Do not use Bacteriostatic Water for Injection, USP for those products that specify the use of only Sterile Water for Injection, USP as a sterile solvent.
Is it safe to inject bacteriostatic water?
Do not use Bacteriostatic Water (bacteriostatic water (bacteriostatic water for injection) for injection) for Injection, USP for intravenous injection unless the osmolar concentration of additives results in an approximate isotonic admixture.
Can I buy bacteriostatic water at a pharmacy?
If you are needing bacteriostatic water for a medication today, you can shop around at various local pharmaceutical retailers, such as Walgreens, CVS, or Walmart. Their pharmacies should have bacteriostatic water in stock and have trusted suppliers for this product.
What makes saline bacteriostatic?
Bacteriostatic saline is a physiological saline solution containing the bacteriostatic agent benzyl alcohol as a 0.9% solution. It is used mostly for diluting and dissolving drugs for IV injection and as a flush for intravascular catheters. It also has local anesthetic properties.
Is all sterile water bacteriostatic?
Sterile Water for injection is single-dose sterile water that does not contain any Bacteriostatic, antimicrobial agents, and added buffers. Store: 20° to 25°C (68 to 77°F) Not for use in neonates. See package label for additional warnings and precautions prior to use.
Is bacteriostatic water the same as distilled water?
has distilled water and nothing else. Bacteriostatic water is water with benzyl alcohol. Immediately you can gauge which is appropriate based on allergies. If you have an allergy to benzyl alcohol, discontinue or avoid bacteriostatic water and opt for sterile water.
Is bacteriostatic sodium chloride the same as saline?
Both normal saline and bacteriostatic saline are often used as vehicles for the injection of therapeutic drugs. However, their properties differ slightly as a result of the 0.9% benzyl alcohol component of BS.
Can I buy bacteriostatic water?
Simply visit or call your local pharmacy and mention if they can special order bacteriostatic water for you. Most drug distributors should have bacteriostatic water from reputable sources. It would be even more beneficial if you provide a particular identifying code such as a UPC, SKU, or NDC number.
How do you make sterile water for injections?
Place cooker with water on a heat stove. Boil water for a minimum of 20 minutes. The temperature within the cooker should be maintained at 121 degrees Celsius or 250 degrees Fahrenheit throughout the boiling period. After that, your sterile water is ready!
Should you refrigerate bacteriostatic water?
There are no special rules that need to be followed as far as discard. Keep your unused bacteriostatic water in the container it arrives in. Store the container in a dark place with a residual, resting room temperature that doesn't exceed 80 degrees Fahrenheit and doesn't drop below 60 degrees Fahrenheit.
3 Precautions to Remember
While benzyl alcohol and its use in bacteriostatic water are presumed to be safe, there are some precautionary rules that we need to consider to responsibly use the solution. Manufacturers and supplying companies like us here at Med Lab Gear will often dictate very specific instructions and warnings regarding bacteriostatic water and its use.
How to Administer Bacteriostatic Water
Properly utilizing the bacteriostatic water is key, otherwise you’re just wasting your money. How you utilize the bacteriostatic water is going to be dictated by what you are using the solution for.
Storage Rules for Bacteriostatic Water
Whether your bacteriostatic water vials come with rubber stoppers or flip top lids, the storage rules should largely remain the same. If your vial has been opened, you should make sure to use the water within a month.
Transportation Guidelines for Bacteriostatic Water
When transporting your bacteriostatic water from location to location in your lab, remember to keep two hands on the container. If you’re transporting just a single vial, grasp the vial tightly in your hand so you don’t risk drop.
Side Effects of Bacteriostatic Water Usage
Apart from the very rare allergic reaction, there are a few potential side effects that you need to consider. Local tenderness at an injection site can be caused by the benzyl alcohol in the bacteriostatic water. We already know how serious exposure can be to a fetus but there is little concern for an adult human.
Med Lab Gear Bacteriostatic Water
Our bacteriostatic water is packaged in semi-rigid vials that are created specifically for laboratory solutions like bacteriostatic water. The container doesn’t need a vapor barrier to keep the labeled volume.
Bacteriostatic Water vs. Sterile Water
Do not confuse the two, as bacteriostatic water is not the same as sterile water. Sterile water comes with no microbes at all so it can be more pricey than bacteriostatic water. Sterile water is manufactured and distributed for single-use only. The sterile water is only sterile until it has been opened.
DESCRIPTION
The following preparation is designed solely for parenteral use only after addition of drugs that require dilution or must be dissolved in an aqueous vehicle prior to injection.
CLINICAL PHARMACOLOGY
Water is an essential constituent of all body tissues and accounts for approximately 70% of total body weight. Average normal adult daily requirement ranges from two to three liters (1.0 to 1.5 liters each for insensible water loss by perspiration and urine production).
INDICATIONS AND USAGE
This parenteral preparation is indicated only for diluting or dissolving drugs for intravenous, intramuscular or subcutaneous injection, according to instructions of the manufacturer of the drug to be administered.
CONTRAINDICATIONS
Due to the potential toxicity of benzyl alcohol in neonates, solutions containing benzyl alcohol must not be used in this patient population.
WARNINGS
Benzyl alcohol, a preservative in Bacteriostatic Water for Injection, USP has been associated with toxicity in neonates. Data are unavailable on the toxicity of other preservatives in this age group. Where water is required for preparing or diluting medications for use in neonates, only preservative-free Sterile Water for Injection should be used.
PRECAUTIONS
Do not use Bacteriostatic Water for Injection, USP for intravenous injection unless the osmolar concentration of additives results in an approximate isotonic admixture.
ADVERSE REACTIONS
Reactions which may occur because of this solution, added drugs or the technique of reconstitution or administration include febrile response, local tenderness, abscess, tissue necrosis or infection at the site of injection, venous thrombosis or phlebitis extending from the site of injection and extravasation.
Bacteriostatic Water Side Effects
Side effects that may occur after drugs are added include fever, the formation of abscesses and even phlebitis. You may also experience infection, tissue death and venous thrombosis.
Bacteriostatic Water for Injection
Bacteriostatic Water for Injection is an essential ingredient in the reconstitution (or mixing) of human chorionic gonadotropin HCG and human growth hormone HGH.
Bacteriostatic Water for HGH
To keep your reconstituted vials of growth hormone usable for more than 24 hours and to avoid possible contamination, you can use bacteriostatic water. The benzyl alcohol contained in this type of water prevents the growth hormone from degrading quickly. It is also a good idea to use sterile water that can be used immediately, but once.
What is bacteriostatic water?
Simply put, this product is sterile, non-pyrogenic water that is used for injection. It has 0.9% benzyl alcohol which is added to a bacteriostatic preservative.
Mixing it with medication
Mixing medication with bacteriostatic water is a pretty straightforward process, and if you have experience with drugs, there is a good chance you’ve already done this:
Potential side effects
The most common side effects that may occur when you use bacteriostatic water actually don’t have anything to do with the product itself. Instead, the most common problems have to do with the syringe and the potential irritation that it causes.
Where to buy bacteriostatic water?
These products are generally the same, no matter where you buy them. So, here are some of the things you need to pay attention to:
Hospira Bacteriostatic Water for Injection Supplier
At BacteriostaticWater.com, we’re dedicated to offering the lowest pricing on Hospira Bacteriostatic Water and Sterile Water for Injection as well as exceptional customer support. Located in the United States, we offer extremely competitive pricing and professional packaging for your order.
What is Bacteriostatic Water?
Bacteriostatic Water for Injection is sterile, non-pyrogenic water that contains 0.9% benzyl alcohol (9mg/mL) added as a bacteriostatic preservative. This preparation of sterile water and benzyl alcohol (BnOH) allows repeated withdrawals to be made from a single 30mL plastic vial.
Purchase Bacteriostatic Water, Insulin Syringes and More!
At BacteriostaticWater.com, we offer quality Hospira brand Bacteriostatic Water and Sterile Water for injection for injection to purchase online that has an expiration date exceeding one year. Bacteriostatic Water is a preparation designed solely for parenteral use.
Empty Sterile Sealed Glass Vials
Empty injection vials are sterile, nonpyrogenic vials made with USP Type I glass that are used for mixing different medications or solutions for injection. The sealed top provides easy needle insertion while keeping the injected liquids safely contained for mixing.
What Is Bacteriostatic Water?
To put it simply, bacteriostatic water inhibits bacteria growth. It’s made of filtered, sterile water and 0.9% benzyl alcohol. This prevents bacteria from growing in the water, making it “static” as the name suggests.
Does Bacteriostatic Water Kill Bacteria?
Bacteriostatic water doesn’t kill bacteria outright, but rather prevents it from growing or thriving in the water.
How Is Bacteriostatic Water Used?
There are three basic ways bacteriostatic water is applied to inpatient care. These include:
Is Bacteriostatic Water Ever Injected Alone?
Bacteriostatic water is never injected into the bloodstream on its own. It is always used to dilute and dissolve other medications. In fact, injecting pure bacteriostatic water can kill red blood cells, giving the patient a whole new problem they heed to deal with.
Does Bacteriostatic Water Have Any Side Effects?
It may seem strange, but bacteriostatic water does come with its own set of possible side effects. These include:
Can Bacteriostatic Water Expire?
It’s recommended that bacteriostatic water be discarded after 28 days of opening it. By this time, the benzyl alcohol may not work as well as it should. You should also store it around 65 degrees Fahrenheit.
Are There Any Non-Medical Uses for Bacteriostatic Water?
While bacteriostatic water is mainly used to dilute and dissolve medicine, it does have one other common use.
Clinical Pharmacology
- Water is an essential constituent of all body tissues and accounts for approximately 70% of total body weight. Average normal adult daily requirement ranges from two to three liters (1.0 to 1.5 liters each for insensible water loss by perspiration and urine production). Water balance is main…
Indications and Usage
- This parenteral preparation is indicated only for diluting or dissolving drugs for intravenous, intramuscular or subcutaneous injection, according to instructions of the manufacturer of the drug to be administered.
Contraindications
- Due to the potential toxicity of benzyl alcohol in neonates, solutions containing benzyl alcohol must not be used in this patient population. Parenteral preparations with benzyl alcohol should not be used for fluid replacement. Parenteral preparations containing benzyl alcohol should not be used in epidural or spinal anesthesia procedures. Bacteriostatic Water for Injection, USP must b…
Warnings
- Benzyl alcohol, a preservative in Bacteriostatic Water for Injection, USP has been associated with toxicity in neonates. Data are unavailable on the toxicity of other preservatives in this age group. Where water is required for preparing or diluting medications for use in neonates, only preservative-free Sterile Water for Injection should be used. Intravenous administration of Bacter…
Precautions
- Do not use Bacteriostatic Water for Injection, USP for intravenous injection unless the osmolar concentration of additives results in an approximate isotonic admixture. Consult the manufacturer's instructions for choice of vehicle, appropriate dilution or volume for dissolving the drugs to be injected, including the route and rate of injection. Inspect reconstituted (diluted or di…
Adverse Reactions
- Reactions which may occur because of this solution, added drugs or the technique of reconstitution or administration include febrile response, local tenderness, abscess, tissue necrosis or infection at the site of injection, venous thrombosis or phlebitis extending from the site of injection and extravasation. If an adverse reaction does occur, discontinue the infusion, e…
Overdosage
- Use only as a diluent or solvent. This parenteral preparation is unlikely to pose a threat of fluid overload except possibly in very small infants. In the event these should occur, re-evaluate the patient and institute appropriate corrective measures. See WARNINGS, PRECAUTIONS and ADVERSE REACTIONS.
Dosage and Administration
- The volume of the preparation to be used for diluting or dissolving any drug for injection is dependent on the vehicle concentration, dose and route of administration as recommended by the manufacturer. Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit. See PRECAUTIONS.
How Is Bacteriostatic Water For Injection Supplied
- Store at 20 to 25°C (68 to 77°F). [See USP Controlled Room Temperature.] Distributed by Hospira, Inc., Lake Forest, IL 60045 USA LAB-0977-2.0 Revised: 08/2019