Where to buy bacteriostatic water?
Visit our buy Bacteriostatic Water page to purchase online at wholesale supply prices. Empty injection vials are sterile, nonpyrogenic vials made with USP Type I glass that are used for mixing different medications or solutions for injection.
Can I buy bacteriostatic water at a pharmacy?
You can typically find it in a vial form at any pharmacy behind the counter, and you can buy it without a prescription. Each vial contains multiple applications. Bacteriostatic water has a shelf life of roughly 28 days before it loses its ability to prevent bacterial growth once opened. Click to see full answer.
Where to buy BAC water?
One reader told us they bought bac water for sale from a company that looked legitimate but it turned out to be plain, ordinary water that she bought. Medlabgear is a popular company where you can buy bacteriostatic water cheap as well as syringes, vials, needles and more.
Where to buy sterile water for injection?
Sterile Water for Injections - available online at Bound Tree. Due to COVID-19, orders for high demand products may be impacted. Learn how we can help you here.
Can you use bacteriostatic water for injection?
Bacteriostatic Water is available generically and has the same name. The Bacteriostatic Water can be used in diluting drugs that can subsequently be administered by intravenous, intramuscular, or subcutaneous injection.
What is the bacteriostatic water for injection?
Bacteriostatic Water (bacteriostatic water (bacteriostatic water for injection) for injection) for Injection, USP is a sterile, nonpyrogenic preparation of water for injection containing 0.9% (9 mg/mL) of benzyl alcohol added as a bacteriostatic preservative.
Can I buy bacteriostatic water?
Bacteriostatic water can be purchased online through various suppliers, Amazon included. However, as a medical professional, I would strongly recommend that you purchase bacteriostatic water directly from a medical supplier or pharmacy.
Is sterile water for injection the same as bacteriostatic water?
Answer: Bacteriostatic water differs from sterile water by the addition of benzyl alcohol as a preservative with a final concentration of 0.9%. Benzyl alcohol can be a topical irritant but in the concentration of 0.9% does not typically cause irritation and may provide some anesthetic effects.
What is bacteriostatic water for injection USP?
Bacteriostatic Water for Injection, USP is a sterile, non-pyrogenic, sterile water that contains 0.9% benzyl alcohol (9mg/mL) added as a bacteriostatic preservative. Bacteriostatic water can be used multiple times up to 28 days once opened. Pfizer recommends that after this time you must discard the vial.
Is 0.9% sodium chloride the same as bacteriostatic water?
Bacteriostatic 0.9% Sodium Chloride Injection, USP is a sterile, nonpyrogenic, isotonic solution of sodium chloride in water for injection. Each milliliter (mL) contains sodium chloride 9 mg and 0.9% (9 mg/mL) benzyl alcohol added as a bacteriostatic preservative. May contain hydrochloric acid for pH adjustment.
How do you make sterile water for injections?
Place cooker with water on a heat stove. Boil water for a minimum of 20 minutes. The temperature within the cooker should be maintained at 121 degrees Celsius or 250 degrees Fahrenheit throughout the boiling period. After that, your sterile water is ready!
Does bacteriostatic water expire?
Storage Rules for Bacteriostatic Water If your vial has been opened, you should make sure to use the water within a month. Do not risk using it beyond that because the benzyl alcohol loses its potency and bacteria will be able to continue to thrive inside the vial.
Is bacteriostatic water the same as normal saline?
Both normal saline and bacteriostatic saline are often used as vehicles for the injection of therapeutic drugs. However, their properties differ slightly as a result of the 0.9% benzyl alcohol component of BS.
Can you substitute sterile water for bacteriostatic water?
Do not use Bacteriostatic Water for Injection, USP for those products that specify the use of only Sterile Water for Injection, USP as a sterile solvent.
Is bacteriostatic water the same as distilled water?
has distilled water and nothing else. Bacteriostatic water is water with benzyl alcohol. Immediately you can gauge which is appropriate based on allergies. If you have an allergy to benzyl alcohol, discontinue or avoid bacteriostatic water and opt for sterile water.
Can you use distilled water for injection?
Sterile Water for Injection, USP, is sterile, nonpyrogenic, distilled water in a single dose container for intravenous administration after addition of a suitable solute. It may also be used as a dispensing container for diluent use. No antimicrobial or other substance has been added.
How long can you use Bacteriostatic Water?
Bacteriostatic water can be used multiple times up to 28 days once opened. Pfizer recommends that after this time you must discard the vial.This preparation of sterile water and benzyl alcohol (BnOH) allows repeated withdrawals to be made from a single 30mL vial.
What is a bacteriostatic agent?
A bacteriostatic agent or bacteriostat is a biological or chemical agent that stops bacteria from reproducing, while not necessarily killing them otherwise. Depending on their application, bacteriostatic antibiotics, disinfectants, antiseptics and preservatives can be distinguished.
How long does a Pfizer water vial last?
Hospira Worldwide now Pfizer injectables is the world’s leading manufacturer of bacteriostatic water, Pfizer injectables recommends that once the vial of bacteriostatic water is open the preservatives will prolong its life for up to 28 days and that after this period of time the vial should to be discarded.
How to mix a syringe with a syringe?
How to Mix medications with Bacteriostatic water: 1 Using an alcohol pad, wipe the rubber stopper on the first vial to decrease the risk of contaminating the medication as you insert the needle into the vial. 2 Pull back syringe plunger until the volume of air drawn into the syringe equals the volume to be withdrawn from the drug vial. 3 Without inverting the vial, insert the needle into the top of the vial, making sure that the needle's bevel tip doesn't touch the solution. Inject the air into the vial and withdraw the needle. This step replaces air in the vial, thus preventing the creation of a partial vacuum on the withdrawal of the drug. 4 With a new needle, repeat the step above for the second vial or empty mixing vial. Then, after injecting the air into the second vial, invert the vial, withdraw the prescribed dose, and then withdraw the needle (as shown below).
How to mix antibiotics with water?
How to Mix medications with Bacteriostatic water: Using an alcohol pad, wipe the rubber stopper on the first vial to decrease the risk of contaminating the medication as you insert the needle into the vial.
What are the reactions that may occur because of this solution, added drugs or the technique of reconstitution or administration?
Reactions which may occur because of this solution, added drugs or the technique of reconstitution or administration include febrile response, local tenderness, abscess, tissue necrosis or infection at the site of injection, venous thrombosis or phlebitis extending from the site of injection and extravasation.
What happens when you take bacteriostat?
Upon removal of the bacteriostat, the bacteria usually start to grow again. This is in contrast to bactericides, which kill bacteria.
How much water is needed to lose weight?
Average normal adult daily requirement ranges from two to three liters (1.0 to 1.5 liters each for insensible water loss by perspiration and urine production).
What are the reactions that may occur because of this solution, added drugs or the technique of reconstitution or administration?
Reactions which may occur because of this solution, added drugs or the technique of reconstitution or administration include febrile response, local tenderness, abscess, tissue necrosis or infection at the site of injection, venous thrombosis or phlebitis extending from the site of injection and extravasation.
Can you use a parenteral preparation as a diluent?
Use only as a diluent or solvent. This parenteral preparation is unlikely to pose a threat of fluid overload except possibly in very small infants. In the event these should occur, re-evaluate the patient and institute appropriate corrective measures. See WARNINGS, PRECAUTIONS and ADVERSE REACTIONS .
Is benzyl alcohol a preservative?
Benzyl alcohol, a preservative in Bacteriostatic Water for Injection , USP has been associated with toxicity in neonates. Data are unavailable on the toxicity of other preservatives in this age group. Where water is required for preparing or diluting medications for use in neonates, only preservative-free Sterile Water for Injection should be used.
Bacteriostatic Sterile Water for Injection, 30ml, Vial
Bacteriostatic Water for Injection is sterile, non-pyrogenic water that contains 0.9% benzyl alcohol (9mg/mL) added as a bacteriostatic preservativ...
Bacteriostatic Sterile Water for Injection, 30ml (2-Pack)
Bacteriostatic Water a multi-use sterile water used for mixing or diluting solutions before injection. Bacteriostatic Water contains 0.9% benzyl al...
Bacteriostatic Sterile Water for Injection, 30ml, Starter Pack
Bacteriostatic Water Starter Pack is a sterile bacteriostatic water for injection preparation kit used to mix, dilute and sterilize vials prior to ...
Sterile Empty Glass Vial for Injection 10 mL
Sterile Empty Glass Vial for Injection that meets CGMP Requirement Standards. Empty Injection Vials are sterile and nonpyrogenic. Used for mixing ...
Sterile Water for Injection 10ml - Single Vial
Hospira Sterile Water for Injection 10ml is a sterile, nonpyrogenic preparation of water for injection which does not contain bacteriostatic (added...
30 mL Sterile Empty Glass Vial for Injection
Sterile Empty Glass Vial for Injection are a 30 ml sterile vial used to mixing medications prior to injection. Empty Glass Vials Features: 30 ml...
Sterile Empty Vial 10mL, 2 pack - Hospira
Hospira Empty Sterile Vial 10 mL is a made of a clear certified depyrogenated and sterile vials. These sterile vials are Type 1 borosilicate assemb...
What is the difference between sterile water and bacteriostatic water?
The difference between bacteriostatic water and sterile water is that other sterile waters for injection do not contain a bacteriostatic agent. As such, they are single-dose vials and should be discarded after a single use.
How long does a vial of sterile water last?
Hospira, the world’s leading manufacturer and supplier of bacteriostatic and sterile water, advises that once a vial of bacteriostatic water is open, the preservatives will prolong its life for up to 28 days.
How much water is needed to lose weight?
Average normal adult daily requirement ranges from two to three liters (1.0 to 1.5 liters each for insensible water loss by perspiration and urine production).
What are the reactions that may occur because of this solution, added drugs or the technique of reconstitution or administration?
Reactions which may occur because of this solution, added drugs or the technique of reconstitution or administration include febrile response, local tenderness, abscess, tissue necrosis or infection at the site of injection, venous thrombosis or phlebitis extending from the site of injection and extravasation.
Is benzyl alcohol safe for neonates?
The safety and effectiveness of Bacteriostatic Water for Injection, USP have not been established in pediatric patients. Due to the potential for toxicity, solutions containing benzyl alcohol should not be used in neonates.
Can you use a parenteral preparation as a diluent?
Use only as a diluent or solvent. This parenteral preparation is unlikely to pose a threat of fluid overload except possibly in very small infants. In the event these should occur, re-evaluate the patient and institute appropriate corrective measures. See WARNINGS, PRECAUTIONS and ADVERSE REACTIONS.
Is benzyl alcohol a preservative?
Benzyl alcohol, a preservative in Bacteriostatic Water for Injection , USP has been associated with toxicity in neonates. Data are unavailable on the toxicity of other preservatives in this age group. Where water is required for preparing or diluting medications for use in neonates, only preservative-free Sterile Water for Injection should be used.