When is a backhoe used for material handling?
When a backhoe/loader/loader is used for material handling the operator must respond to the hand signals of the Spotter and stop at once, regardless of who gives the signal. The operator is not responsible for keeping personnel from entering the area around the boom of the backhoe/loader.
How to operate a backhoe/loader safely?
The backhoe/loader shall only be operated from the operator’s seat, which must be locked in the appropriate position. The Operator can use the backhoe/loader/loader transport personnel. The safe operating distance from energized power lines is the same regardless of the voltage in the power line.
What are the specs of a backhoe loader?
Specifications Maximum Dig Depth. 5.05 m. Maximum Engine Power. 54 kW ( 74 hp) Maximum Loader Capacity. 6 in 1 bucket. Backhoe loaders are very versatile. They are a combination of a wheeled excavator with a hydraulic arm and bucket on one end and a large shovel on the other.
When to use foot protection when working close to material handling equipment?
Finally, always use foot protection (steel toe working boots) whenever working close to Material Handling equipment, such as forklifts, cranes and front-end loaders. Material Handling Be careful when stacking and storing materials. PPT-126-01
How do you use a backhoe for beginners?
4:1320:55How to Operate a Backhoe | Tractor Loader Backhoe Training - YouTubeYouTubeStart of suggested clipEnd of suggested clipOutside of that you got your foot pedals. Two brakes that are basically these you can flip thatMoreOutside of that you got your foot pedals. Two brakes that are basically these you can flip that little lever up and you can do either a right or a left. So the cool thing about backhoes.
What should you not do with a backhoe?
10:2416:28Tractor Loader Backhoe Operator Training - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn assuming again if you have an attachment or a quick attach where you can't just know theMoreIn assuming again if you have an attachment or a quick attach where you can't just know the limitations on your machine. But generally you want to be as tight as possible.
How far should the backhoe be off the ground when working?
“The machine should be level with the front and the rear tires raised clear of the ground by around 6 in. Keep the stabilizers spread as far apart as possible without letting any tires touch the ground.
How do you work a backhoe 2020 pre op to shut down?
1:3652:31How to Operate a Backhoe (2020) Pre-Op to Shut Down - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe drive systems on the inside. Making sure there's nothing loose there's nothing leaking.MoreThe drive systems on the inside. Making sure there's nothing loose there's nothing leaking.
How can I be a good backhoe operator?
2:276:41How to Become a Heavy Equipment Operator - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou just need to focus on the basics. For. Example if you're in an excavator. Just don't do anythingMoreYou just need to focus on the basics. For. Example if you're in an excavator. Just don't do anything fancy reach out pick up a pile of dirt move it from point a to point b.
How do you stabilize backhoe?
0:000:49How to Operate Stabilizers on a Backhoe - YouTubeYouTubeStart of suggested clipEnd of suggested clipDo you lower the front bucket down to lift weight off the front end of the machine. So that puts allMoreDo you lower the front bucket down to lift weight off the front end of the machine. So that puts all the weight of the machine on the front bucket as a stabilizer.
What are the controls on a backhoe?
0:012:28Backhoe General Controls - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt is possible to select four forward and four rearward travel gears to the right of the speed.MoreIt is possible to select four forward and four rearward travel gears to the right of the speed. Control is the loader control and parking brake.
How do you backfill with a backhoe?
21:1427:08AFQTP - BACKHOE OPERATIONS - EXCAVATE, LOAD, AND BACKFILL ...YouTubeStart of suggested clipEnd of suggested clipForward until the front of the bucket is centered over the trench. Watch your front tires closely.MoreForward until the front of the bucket is centered over the trench. Watch your front tires closely. Very gently uncurl the bucket. So that the material will slowly flow out of the bucket.
How many hours is too many on a backhoe?
After about 6,000 hours, 20% of engines in 14-15-foot loaders required a major repair or replacement. Typically, by 8,500 hours, 50% of the components in a backhoe loader have reached their end and fail within 3,500 hours.
What are the parts of a backhoe called?
The backhoe portion of the machine consists of three main components: the boom, the bucket, and the dipstick. In order to use the backhoe, you must first park the tractor in a stable position using stabilizer legs. Then you can use the backhoe to dig up trenches, holes, small ponds, or similar applications.
How do you drive a payloader?
3:4313:34how to run, operate & understand Heavy equipment part 1 - YouTubeYouTubeStart of suggested clipEnd of suggested clipThey just push they push down. And then you start rocking the machine up you lose the video. And youMoreThey just push they push down. And then you start rocking the machine up you lose the video. And you use your pump no contact on the ground then you start spinning tires. Once.
Why are excavator and backhoe controls different?
Excavators differ from the backhoe as all controls are based on using joysticks and levers. Excavators come with two joysticks, both of which have a set function designated to each joystick. These functions are going to be the same no matter the brand of machine.
How to report unsafe working conditions?
To report Unsafe Working Conditions, Safety and Health Violations Contact OSHA @: . 1-800-321-OSHA (6742) / TTY1-877-889-5627. To File a Complaint Form: To file an OSHA-7 report online, see how to file a complaint with OSHA (www.osha.gov) For more information regarding your rights, see Worker Rights.
How to safeguard employees?
Safety signs are also another way. to safeguard employees. Maintain foot traffic and vehicle traffic separated whenever possible. If working in close quarters or public areas where pedestrian could be at risk, increase distance for perimeter fencing, attach safety nets when falling objects could be a hazard to anyone.
Free Tractor Safety PowerPoints
Here is a collection of free safety training PowerPoints. These are not owned or endorsed by Affordable Safety Training LLC. Use them at your discretion.
Tractor Safety
A brief presentation that gives you the basics of how to operate a tractor safely.
Tractor Safety
This PowerPoint has very detailed information on the proper use of a tractor. Including using jumper cables and how to operate in reverse.