Bac Water, which is also known as Bacteriostatic
Bacteriostatic agent
A bacteriostatic agent or bacteriostat, abbreviated Bstatic, is a biological or chemical agent that stops bacteria from reproducing, while not necessarily killing them otherwise. Depending on their application, bacteriostatic antibiotics, disinfectants, antiseptics and preservatives can …
Full Answer
Does bacteriostatic water for injection affect fluid balance?
Clinical Pharmacology. The small volume of fluid provided by Bacteriostatic Water for Injection, USP when used only as a pharmaceutic aid for diluting or dissolving drugs for parenteral injection, is unlikely to exert a significant effect on fluid balance except possibly in very small infants.
What is bacterial water for injection?
Bacteriostatic Water for Injection, USP is a sterile, nonpyrogenic preparation of water for injection containing 0.9% (9 mg/mL) or 1.1% (11 mg/mL) benzyl alcohol added as a bacteriostatic preservative. It is supplied in a multiple-dose container from which repeated withdrawals may be made to dilute or dissolve drugs for injection.
What is the USP for bacteriostatic water for injection?
Bacteriostatic Water for Injection, USP must be made approximately isotonic prior to use. Benzyl alcohol, a preservative in Bacteriostatic Water for Injection, USP has been associated with toxicity in neonates. Data are unavailable on the toxicity of other preservatives in this age group.
Is bacteriostatic water for injection safe in pediatric patients?
The safety and effectiveness of Bacteriostatic Water for Injection, USP have not been established in pediatric patients. Due to the potential for toxicity, solutions containing benzyl alcohol should not be used in neonates.
What is bacteriostatic water for injection used for?
Bacteriostatic Water (bacteriostatic water for injection) is sterile water containing 0.9% benzyl alcohol that is used to dilute or dissolve medications; the container can be reentered multiple times (usually by a sterile needle) and the benzyl alcohol suppresses or stops the growth of most potentially contaminating ...
Is bacteriostatic water safe for injection?
Do not use Bacteriostatic Water (bacteriostatic water (bacteriostatic water for injection) for injection) for Injection, USP for intravenous injection unless the osmolar concentration of additives results in an approximate isotonic admixture.
What water can be used for injection?
Sterile Water for Injection, USP, is sterile, nonpyrogenic, distilled water in a single dose container for intravenous administration after addition of a suitable solute. It may also be used as a dispensing container for diluent use. No antimicrobial or other substance has been added. The pH is 5.5 (5.0 to 7.0).
Can I buy bacteriostatic water at a pharmacy?
If you are needing bacteriostatic water for a medication today, you can shop around at various local pharmaceutical retailers, such as Walgreens, CVS, or Walmart. Their pharmacies should have bacteriostatic water in stock and have trusted suppliers for this product.
Do you need to refrigerate BAC water?
There are no special rules that need to be followed as far as discard. Keep your unused bacteriostatic water in the container it arrives in. Store the container in a dark place with a residual, resting room temperature that doesn't exceed 80 degrees Fahrenheit and doesn't drop below 60 degrees Fahrenheit.
How long can Bac water last?
When the vial is opened the water should be used within 28 days. After this time it is best to discard it. It should be stored in a dark place at temperatures between 60 to 77 degrees Fahrenheit. Bacteriostatic water is safe in most applications.
Is distilled water same as sterile water?
Is sterile water the same as distilled water? No, sterile water should not be confused with distilled water. Distilled water is created by a process of steaming and condensation, and does not contain any minerals like salt, calcium or iron. A distinction should further be made between sterile water and saline solution.
Is water for injection the same as sodium chloride?
0.9% Sodium Chloride Injection, USP is a parenteral fluid and electrolyte replenisher. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O.
What is the difference between distilled water and water for injection?
Water for injection is basically sterile, nonpyrgenic and with absence of particles. Sterile distilled water may contain pyrogens and other nonviable particles that may be harmful while administration i.v.
How do you get bac water?
Due to the influx of sick patients, hospital area pharmacies usually have a stronger medical supply. Simply walk up or call the pharmacy and ask if they have bacteriostatic water on hand. Chances are that if they don't have any, they may mention local pharmacies or medical supply stores that have it.
Can I use sterile water instead of bacteriostatic water?
Do not use Bacteriostatic Water for Injection, USP for those products that specify the use of only Sterile Water for Injection, USP as a sterile solvent.
Is 0.9% sodium chloride the same as bacteriostatic water?
Bacteriostatic 0.9% Sodium Chloride Injection, USP is a sterile, nonpyrogenic, isotonic solution of sodium chloride in water for injection. Each milliliter (mL) contains sodium chloride 9 mg and 0.9% (9 mg/mL) benzyl alcohol added as a bacteriostatic preservative. May contain hydrochloric acid for pH adjustment.
What is the difference between bacteriostatic water and sterile water for injection?
Answer: Bacteriostatic water differs from sterile water by the addition of benzyl alcohol as a preservative with a final concentration of 0.9%. Benzyl alcohol can be a topical irritant but in the concentration of 0.9% does not typically cause irritation and may provide some anesthetic effects.
Can you use bacteriostatic water for Botox?
TIP: Always use bacteriostatic normal saline as the diluent as per manufacturer guidance. Reconstituting with sterile water can cause the client great discomfort during treatment.
Can you use bacteriostatic water to mix Botox?
At Hamilton Facial Plastic Surgery, we mix our Botox using bacteriostatic saline (a sterile, isotonic solution of sodium chloride in water and benzyl alcohol added as a bacteriostatic preservative). I believe in using this mixture because it is thought to be less painful and longer lasting.
Is 0.9% sodium chloride the same as bacteriostatic water?
Bacteriostatic 0.9% Sodium Chloride Injection, USP is a sterile, nonpyrogenic, isotonic solution of sodium chloride in water for injection. Each milliliter (mL) contains sodium chloride 9 mg and 0.9% (9 mg/mL) benzyl alcohol added as a bacteriostatic preservative. May contain hydrochloric acid for pH adjustment.
How to mix antibiotics with water?
How to Mix medications with Bacteriostatic water: Using an alcohol pad, wipe the rubber stopper on the first vial to decrease the risk of contaminating the medication as you insert the needle into the vial.
How long can you use Bacteriostatic Water?
Bacteriostatic water can be used multiple times up to 28 days once opened. Pfizer recommends that after this time you must discard the vial.This preparation of sterile water and benzyl alcohol (BnOH) allows repeated withdrawals to be made from a single 30mL vial.
How long does a Pfizer water vial last?
Hospira Worldwide now Pfizer injectables is the world’s leading manufacturer of bacteriostatic water, Pfizer injectables recommends that once the vial of bacteriostatic water is open the preservatives will prolong its life for up to 28 days and that after this period of time the vial should to be discarded.
How to mix a syringe with a syringe?
How to Mix medications with Bacteriostatic water: 1 Using an alcohol pad, wipe the rubber stopper on the first vial to decrease the risk of contaminating the medication as you insert the needle into the vial. 2 Pull back syringe plunger until the volume of air drawn into the syringe equals the volume to be withdrawn from the drug vial. 3 Without inverting the vial, insert the needle into the top of the vial, making sure that the needle's bevel tip doesn't touch the solution. Inject the air into the vial and withdraw the needle. This step replaces air in the vial, thus preventing the creation of a partial vacuum on the withdrawal of the drug. 4 With a new needle, repeat the step above for the second vial or empty mixing vial. Then, after injecting the air into the second vial, invert the vial, withdraw the prescribed dose, and then withdraw the needle (as shown below).
What is a bacteriostatic agent?
A bacteriostatic agent or bacteriostat is a biological or chemical agent that stops bacteria from reproducing, while not necessarily killing them otherwise. Depending on their application, bacteriostatic antibiotics, disinfectants, antiseptics and preservatives can be distinguished.
What are the reactions that may occur because of this solution, added drugs or the technique of reconstitution or administration?
Reactions which may occur because of this solution, added drugs or the technique of reconstitution or administration include febrile response, local tenderness, abscess, tissue necrosis or infection at the site of injection, venous thrombosis or phlebitis extending from the site of injection and extravasation.
What happens when you take bacteriostat?
Upon removal of the bacteriostat, the bacteria usually start to grow again. This is in contrast to bactericides, which kill bacteria.
What are the reactions that may occur because of this solution, added drugs or the technique of reconstitution or administration?
Reactions which may occur because of this solution, added drugs or the technique of reconstitution or administration include febrile response, local tenderness, abscess, tissue necrosis or infection at the site of injection, venous thrombosis or phlebitis extending from the site of injection and extravasation.
How much water is needed to lose weight?
Average normal adult daily requirement ranges from two to three liters (1.0 to 1.5 liters each for insensible water loss by perspiration and urine production).
Is benzyl alcohol a preservative?
Benzyl alcohol, a preservative in Bacteriostatic Water for Injection , USP has been associated with toxicity in neonates. Data are unavailable on the toxicity of other preservatives in this age group. Where water is required for preparing or diluting medications for use in neonates, only preservative-free Sterile Water for Injection should be used.
Can you use benzyl alcohol for fluid replacement?
Parenteral preparations with benzyl alcohol should not be used for fluid replacement. Parenteral preparations containing benzyl alcohol should not be used in epidural or spinal anesthesia procedures. Bacteriostatic Water for Injection, USP must be made approximately isotonic prior to use.
Can you use benzyl alcohol in pediatrics?
The safety and effectiveness of Bacteriostatic Water for Injection, USP have not been established in pediatric patients. Due to the potential for toxicity, solutions containing benzyl alcohol should not be used in neonates.
Can bacteriostatic water be used for pregnancy?
Pregnancy: Animal reproduction studies have not been conducted with Bacteriostatic Water for Injection. It is also not known whether Bacteriostatic Water for Injection containing additives can cause fetal harm when administered to a pregnant woman or can affect reproduction capacity.
Can you use a parenteral preparation as a diluent?
Use only as a diluent or solvent. This parenteral preparation is unlikely to pose a threat of fluid overload except possibly in very small infants. In the event these should occur, re-evaluate the patient and institute appropriate corrective measures. See WARNINGS, PRECAUTIONS and ADVERSE REACTIONS.
Bacteriostatic Sterile Water for Injection, 30ml, Vial
Bacteriostatic Water for Injection is sterile, non-pyrogenic water that contains 0.9% benzyl alcohol (9mg/mL) added as a bacteriostatic preservativ...
Bacteriostatic Sterile Water for Injection, 30ml (2-Pack)
Bacteriostatic Water a multi-use sterile water used for mixing or diluting solutions before injection. Bacteriostatic Water contains 0.9% benzyl al...
Bacteriostatic Sterile Water for Injection, 30ml, Starter Pack
Bacteriostatic Water Starter Pack is a sterile bacteriostatic water for injection preparation kit used to mix, dilute and sterilize vials prior to ...
Sterile Empty Glass Vial for Injection 10 mL
Sterile Empty Glass Vial for Injection that meets CGMP Requirement Standards. Empty Injection Vials are sterile and nonpyrogenic. Used for mixing ...
Sterile Water for Injection 10ml - Single Vial
Hospira Sterile Water for Injection 10ml is a sterile, nonpyrogenic preparation of water for injection which does not contain bacteriostatic (added...
30 mL Sterile Empty Glass Vial for Injection
Sterile Empty Glass Vial for Injection are a 30 ml sterile vial used to mixing medications prior to injection. Empty Glass Vials Features: 30 ml...
Sterile Empty Vial 10mL, 2 pack - Hospira
Hospira Empty Sterile Vial 10 mL is a made of a clear certified depyrogenated and sterile vials. These sterile vials are Type 1 borosilicate assemb...
What is bacteriostatic water used for?
Bacteriostatic Water is used when dissolving (or reconstituting) HCG and HGH. Mixing with Bacteriostatic Water is also required for peptides, growth factors, hormones HRT, testosterone, and many other injectable compounds originally stored and shipped in powdered form.
How long does a sterile water vial last?
Hospira - Pfizer recommends that once a vial of Bacteriostatic Sterile water is open the preservatives will prolong its life for up to 28 days. After 28 days the vial needs to be discarded. Other USP Sterile waters without the bacteriostatic agent (single-dose vials) should be discarded after a single use.
Can you use bacteriostatic water in newborns?
Please speak to your doctor before using Bacteriostatic Water or any injection products. Not for use in newborns and not to be used for inhalation.
Is benzyl alcohol sterile?
Benzyl alcohol is a colorless liquid that has low toxicity, and low vapor pressure. Sterile Water for injection is a single-dose sterile water that does not contain any bacteriostatic, antimicrobial agents, and added buffers. We DO NOT SELL Sterile Water.
Is Bacteriostatic Water available on Amazon?
Bacteriostatic Water is NOT available on eBay or Amazon. HCGSupplies has no Bacteriostatic water shortage. Order as much as you need. Some people call this Bac Water, Sterile Water with alcohol, Barostatic Water, Bacteria Static Water, Biostatic Water, Mixing Solvent, Pfizer, or Hospira Water. You might be asking:
What is the difference between sterile water and bacteriostatic water?
The difference between bacteriostatic water and sterile water is that other sterile waters for injection do not contain a bacteriostatic agent. As such, they are single-dose vials and should be discarded after a single use.
How long does a vial of sterile water last?
Hospira, the world’s leading manufacturer and supplier of bacteriostatic and sterile water, advises that once a vial of bacteriostatic water is open, the preservatives will prolong its life for up to 28 days.
Description
Clinical Pharmacology
Indications and Usage
Contraindications
Warnings
Precautions
- Do not use Bacteriostatic Water for Injection, USP for intravenous injection unless the osmolar concentration of additives results in an approximate isotonic admixture. Consult the manufacturer's instructions for choice of vehicle, appropriate dilution or volume for dissolving the drugs to be injected, including the route and rate of injection. Ins...
Adverse Reactions
Overdosage
Dosage and Administration
How Is Bacteriostatic Water For Injection Supplied