What is the average shoulder width for a man?
The average man in the United States is 5-foot 10-inches tal, and weighs 172 pounds. His shoulder width is 18-1/4 inches. Using that as a starting number, if your shoulder width is approximately 18-1/4 inches... then, your shoulder width is AVERAGE or NORMAL.
What is the standard shoulder width of road in India?
Shoulder width of road in india is per IRC:- in india, as per the rules & guidelines of Indian Road Congress (IRC), ideal and standard shoulder width of road should be 4.6 m and minimum is about 2.5 m wide at both sides along the edge of road.
How to measure your shoulder size?
Instruct your friend to place the end of the measuring tape at the place where your shoulder meets the top of your arm, or, the boniest part of your shoulder. From there, holding the tape taut, they should stretch the tape straight across to the tip of your other shoulder blade.
What is the average size of Indian men's feet?
The average height of Indian men is 5.5 feet then how can their foot size be 10 in normal circumstances. It has to be somewhere between size 6–8. Size 9 and 10 would be on the higher side and rare too. My answer is size 7, 7.5 and 8. Thanks for your question. Usually it is about 7 or 8. May be a more of max rate getting could be 10.
How wide is the average man's shoulders?
Based on the shoulder measurements of 7,476 men aged 20 years and older taken during the same time period, the average shoulder width of men in the United States was 16.1 inches (41.1 cm).
What is considered broad shoulders for a man?
The golden ratio number is 1.618. So the goal is to get a shoulder-to-waist ratio of 1.618 (or better) to be considered broad shouldered. Take a tailor's measuring tape and measure all the way around your shoulders and around your back.
Are wide shoulders attractive?
A study by Cambridge University of more than 700 women found broad shoulders were the most attractive male asset.
What are considered narrow shoulders?
Narrow Shoulders: 1.27 and below. Normal Shoulders: 1.32. Broad Shoulders: 1.38.
How many categories of Indian males were there?
Important insights were gained. Based on such analysis, the Indian male population was divided into 15 categories comprising of 3 categories on the basis of height and 5 categories on the basis of body shape or Drop value. These categories provide a critical framework for developing a garment sizing system for this group of people. The categories and the distribution of the population under the same are shown in Table 2. These categories are the same as those used by some European countries to describe their population but the drop intervals for Indian population were found to be very different from them. Again, the drop intervals were not calculated by just dividing the complete range with the number of categories required. Instead, a complex analysis of the population data was used to arrive at these categories which truly reflect the distribution in the population.
How long have anthropometric surveys been conducted in India?
Anthropometric surveys have been conducted frequently in India for the last 30-40 years. Some have been conducted by Home Science colleges and the results have been used for pattern development exercises for various age groups. Many others have been conducted to assess the nutritional status of population groups but unlike US studies, very little information about the findings of such studies is available in the public domain. Besides, these surveys were mostly restricted to small, local population sets. A comprehensive all India survey was undertaken by Dr KS Singh for the Anthropological Survey of India, from 1985 onwards, to study the effect of several parameters on growth patterns of the various ethnic groups in India. However, the measurements taken for anthropological studies are quite different from those required for the purpose of developing size charts for garment manufacture and hence cannot be used for the purpose. Some small studies have also been conducted by ergonomists to collect data for the purpose of design of work places.
Why do we not have a sizing system in India?
The reason why we in India, do not have even a primitive garment sizing system in place is, one- that the traditional Indian garments comprised primarily of draped wear and whatever little stitching was required, could be catered to by the local tailor; secondly, we had no organized retailing set ups and thirdly, we were not a fashion conscious or a fit conscious population. Thus the need was never felt for a ready made garment sizing system. As the clothing preferences now shift from Indian to western wear, the need for a sizing system is being felt acutely. But this does not mean that the so called developed nations are not facing problems in this area. The number of research studies conducted and the amount of literature generated in the area of sizing and fit in the last 5 years throughout the world is phenomenal. In fact, it would not be an exaggeration to state that there is no prestigious textile/ apparel department or university in Europe or America which is not currently working in the area of garment sizing and fit!!
Why is there a need for a systematic and scientific system for measuring and classifying human bodies in India?
The need for having a systematic and scientific system for measuring and classifying human bodies in India for the purpose of developing a sizing system for garments need not be emphasized any longer. As we move into times characterized by unprecedented retail growth, this need is becoming more and more acute. As the masses start frequenting the Malls for their clothing requirements, they are becoming aware of the fit or rather the lack of it that the various brands offer. Fit has been cited as one of the major criteria that determine the purchase decisions for clothing- and thus could make or mar a brands popularity. Given the novelty of Mall culture in India, the consumers are still on a steep learning curve and it is a matter of time before they become sensitive to the issue of fit and become frustrated by the lack of it.
How many lengthwise measurements are needed for a garment?
However, height and weight within themselves have very poor correlation. So in general, for good fitting of garments, at least one lengthwise measure and one girth measure would be required. Measures to be selected would depend on the garment type and the critical measurements for the same.
What is the problem with garment sizing?
The complexity of garment sizing. The problem of garment sizing is extremely complex, besides being interdisciplinary in nature; thus making the entire exercise of developing a sizing system, a highly capital and time intensive one.
Is there a correlation between chest girth and waist girth?
Correlation between chest girth and waist girth for the young mens population discussed above was found to be quite high (0.88). A nearly linear trend is observed in the plot shown in Figure 2. However, it can be seen that there is a fair amount of spread too in the population data. The analysis of this spread for a section of the population (waist girth 90-96 cm) is shown in Figure 3.
What is the average shoulder width for a young man?
Young men with average shoulder width generally have a shoulder width of between 35 and 45 centimeters.
How to determine shoulder width?
There are many different ways to determine an average shoulder width. One way is to use the “rule of thirds”. If you look at three pictures side by side and take the middle one as your reference picture, then it will give you an idea what your shoulder width should be according to the rule of thirds. Another method is to take a ruler and draw lines from each earlobe to the next.
How to measure body fat percentage?
There are two main ways to measure your body fat percentage. The first is the expensive way and the second is the cheap way. The expensive way involves hydrostatic weighing. This consists of submerging yourself in a tank of water and measuring how much you displace, this is compared to a sample of human tissue of known density (death row inmates donated their bodies to science, thank you very much) and from this, your body fat percentage is calculated.
Who wrote on the mechanical aspects of shoulder dystocia and birth injury?
On the mechanical aspects of shoulder dystocia and birth injury by RH Allen – Clinical obstetrics and gynecology, 2007 – journals.lww.com
Can you see shoulder width?
You can now easily see your shoulder width since it is marked out for you.
What does a broad shoulders mean?
Broad, powerful shoulders are a hallmark of masculine physiques. They indicate strength and confidence, along with an abundance of testosterone.
How big should a 5'10 man's arms be?
Example: For the average 5′ 10″ man, building his arms up to about 15.5-16.5″ (typical ne ck size) should look great.
What does waist size mean?
Waist size is the building block of a great physique. Too much extra padding around the middle, and the entire aesthetic suffers. A waist size of about ~45% of your height indicates fairly low bodyfat percentage and an overall athletic build (also, probably a nice set of abs).
What is the ideal chest size for a 5'10 guy?
Example: For a 5′ 10″ tall guy, a chest measurement of about 42-45″ is ideal, assuming a lean and tight waist in the low 30″ range.
What is the pinnacle of male form?
Michelangelo’s statue of David , for example, was once considered the pinnacle of the male form. Though we now live in the age of “bigorexia” where so many guys want the biggest muscles they can possibly get, many of us chase something much more proportionate: A lean, athletic, powerful, and chiseled physique.
Does chest give you a ton of width?
Your chest won’t necessarily give you a ton of extra width to your frame, but will give you thickness from the side and make your waist and stomach area look even smaller. The upper chest in particular forms a powerful looking shelf when built properly.
What is shoulder width in India?
Shoulder width of road in india is per IRC:- in india, as per the rules & guidelines of Indian Road Congress (IRC), ideal and standard shoulder width of road should be 4.6 m and minimum is about 2.5 m wide at both sides along the edge of road. Shoulder width of road is 4.125m wide prescribed for NH/ SH, of single lane pavement and for 2 lane it should be 2.5m wide. For village road this is 2.25m wide. This is quite sufficient for accommodation of stop vehicles, serve as an emergency lane and used during crossing and overtaking.
Why do trucks need shoulder width?
Shoulder should be strong enough to bear the weight of fully loaded truck even in wet condition. Shoulder width should be required for giving working space. It is used during crossing and overtaking.
What are the different types of roads in India?
There is several kinds of Road in india constructed by central and state government in urban and rural areas, such as National Highway (NH), state highway (SH), MDR (major district road), ODR (other District road) and village road (VR). It will be constructed in plain or mountainous steep & hilly area. Generally National Highway constructed by Central Government of India consists of 2 Lane, 3 Lane, 4 lane and 6 Lane Road. State highway, MDR, ODR and village road constructed by State Government consist of single lane, 2 Lane, 3 Lane and 4 lane road.
How wide is Gregg Downing's shoulder?
This photo shows Gregg Downing's shoulder width being measured with an outside caliper. From this position the caliper is closed until each point comes in contact with the outside of his deltoid, which has been marked with an "x." Prior to his initial workout, Gregg's shoulders were 20 inches. After one 4-exercise cycle, his shoulders pumped to 20-1/2 inches, which was an indication that they could grow to that width.
How big were Gregg's shoulders?
Prior to his initial workout, Gregg’s shoulders were 20 inches. After one 4-exercise cycle, his shoulders pumped to 20-1/2 inches, which was an indication that they could grow to that width. Most gyms in the 1940s and 1950s, according to Sorenson, had an outside caliper handy for this meaningful measurement.
How tall was Ahrens?
Six-foot tall Ahrens, actually had shoulders like that guy wearing those seven-tailored sweaters wished he had. “If you’ve followed the Iron Game for the last 50 years, you’ll remember some of the amazing feats of strength that were attributed to Ahrens by the muscle magazines in the late 1950s and 1960s.
How to measure the distance between two pencil marks?
Step away from the wall and measure, with the yardstick or tape measure, the horizontal distance between the two pencil marks.
Why do boys want shoulders?
“Armed forces recruiters frequently made reference to needing real men to fight, as opposed to sissy men. Boys everywhere wanted to be like the real-man heroes, who they saw in both the movies and the newsreels, or heard about on the battlefields.”
What is the difference between a middle five and a seventh sweater?
Each of the middle five sweaters had a slightly smaller neck hole and a slightly longer bottom and longer sleeves. The seventh sweater had to be very large through the shoulders, chest, and upper arms, but be carefully tailored to fit normally at the neck, waist, and wrist.”.
How to take comparison photos?
Do not try to pose and do not pump up any of your muscles. Try to standardize the photos: same background, angle and distance from the camera, and time of day. At the end of the plan, consider emailing me your comparison photos.
What is the average size of foot for Indian men?
Some people have answered 10 as the average size of foot for Indian men. I don't know what were they thinking while answering this question.
How tall is the sailor?
5′9″ (175 cm) and US 8 1/2.
What is the max rate for a scuba diver?
Usually it is about 7 or 8. May be a more of max rate getting could be 10. But some exceptions are having a size of 15 too. Isn't it shocking
Is 8.5 a small shoe size?
I feel like a lot of answers tiptoe around this. For an American male, 8.5 is a small shoe size. There’s nothing horrible about that, but that is on the small size.