Concrete can cost, on average, 50 percent more than asphalt, making asphalt a better value for your money. Asphalt can run about $4 to $6 per square foot. Concrete Concrete is usually the most expensive option initially. Concrete can cost 2-3 times as much as asphalt and about 6X the gravel cost. Concrete can run $5 to $10 per square foot.
How much does it cost to replace concrete with asphalt?
Asphalt is more cost-effective than concrete but requires more maintenance for homeowners. Concrete prices are $119 to $147 per yard. Asphalt lasts 15 to 30 years, while concrete lasts 30 to 40 years. Enter the length and width of your project in feet below to estimate the cost of asphalt materials.
Is asphalt or concrete better for my project?
Once the asphalt cools, it is strong enough to withstand automobile traffic. Asphalt is smooth, black, and does not absorb water. While asphalt is tough and durable, it offers enough flexibility to adjust to imperfect underlying surfaces. When choosing asphalt or concrete for your project, consider the following:
Is asphalt or concrete more expensive to stain?
Stains easily – Due to the light color, concrete shows almost every type of stain, particularly oil stains. Expensive than Asphalt – Concrete is significantly more expensive than asphalt. Types of Driveways and Cost Comparison Type Description Lasts Average Cost Concrete
How much does it cost to have asphalt delivered?
Asphalt delivery costs $40 to $80 per hour or $4 to $9 per ton within 15 to 20 miles of asphalt plants. Greater distances cost more because hot-mix asphalt must stay at precise temperatures for immediate paving on delivery. Asphalt delivery is typically part of material costs in project estimates.
Is it cheaper to use asphalt or concrete?
Cost. The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.
Is it better to have a concrete or asphalt driveway?
Concrete driveways normally last longer than asphalt. In general, if installed properly in a suitable climate and maintained regularly, your concrete driveway should last 30 to 40 years, while an asphalt driveway is generally good for 20 to 30 years.
What is the best type of driveway to have?
Concrete. Among the most durable options on the market is a concrete driveway surface. Although it provides a hard and stable surface, that is highly dependant on professional installation, high upfront costs, maintenance, and weather conditions.
What is the cheapest way to do a driveway?
A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway's sub-base is sound.
What is the difference between concrete and asphalt?
Concrete and asphalt are both mixtures of sand and crushed stone called aggregate. The difference is what binds the aggregate together . In concrete, cement binds the mixture and gives it a light gray appearance. Asphalt is bound with a black, viscous petroleum-based substance. Both come in assorted colors, stained or stamped for a decorative effect.
How much does a gravel driveway cost?
The cost of a gravel driveway is the cheapest at $1,500. Concrete driveways cost $3,900 on average and asphalt costs $4,500.
How much does it cost to install a driveway heating system?
You can install a driveway heating system under either type of material. The average cost to install under asphalt is just under $9,000. The average cost to install under concrete is just under $8,000.
What is concrete driveway?
Concrete or Cement Driveways. Often used interchangeably, concrete is a composite material held together with cement. Concrete is a mixture of crushed stone, sand and cement. Cement is a mixture of water, powdered rock and clay. Pros pour the cold mixture onto a prepared gravel surface and level it. After several days of curing, the surface is ...
How thick is concrete?
Concrete. A minimum thickness of four inches is necessary. An additional inch will increase load carrying capacity by 50 percent, but it will increase cost by 20 percent. It’s easier to determine load capacity for concrete.
What is asphalt driveway called?
Colloquially, people refer to asphalt driveways as “blacktop” and call roads, airplane runways or parking lots “pavement.”.
How long does it take to drive on asphalt?
Pros pour the hot mixture over a level, gravel base before pressing and smoothing it with a steamroller. You can park or drive a car on it within 24 hours.
How much does asphalt cost per ton?
You’ll notice that most asphalt manufacturers sell new material on a per ton basis, averaging $100 to $200 per ton . One ton material usually covers 40 to 80 square feet. The quantity you need depends on the thickness of the layers such as a 2 inches thick would cost 80 square feet per ton while 4 inches think would cost 40 square feet per ton.
How much does it cost to install an asphalt driveway?
dollars on 2017 (6,649 U.S. dollars). The cost to install an asphalt driveway could be between $2,300 and $10,300 and typically the cost is calculated per square foot.
How much does it cost to pave a driveway?
Paving an asphalt driveway costs $4,562 on average, with a typical range between $2,856 and $6,313. This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor. If you need replacement, you’ll pay $8 to $15 per square foot. Although driveways are the most common use of asphalt in the home, other applications include:
What is asphalt driveway?
It is also known as blacktop due to its color, asphalt is a mixture of stones and sand, bound together with materials left over during the production of Petrochemicals such as Pertol, Diesel and Gasoline.
How much to put gravel under asphalt?
If you’re building a driveway where none existed, budget about an extra $2 to install a layer of gravel beneath the asphalt.
How much does concrete cost?
Basic, construction-grade concrete costs about $5 to $12 per square foot , including installation. If you opt for more fancier, decorative versions such as stamped or colored concrete, then prices go up by few dollars per square feet. However, high-end concrete could cost as much as $15 per square foot.
Do driveways need to be resealed?
Low maintenance – Concrete driveways don’t need to be resealed as often, particularly in mild climates.
What is the difference between asphalt and concrete?
Both asphalt 1 and concrete have the basic ingredients of stone and sand in their composition. The difference is in the adhesive element that binds these ingredients together. For asphalt, this adhesive is tar, a byproduct of gasoline, kerosene, and diesel production, whereas the adhesive for concrete is cement.
How much does it cost to install an asphalt driveway?
The average asphalt driveway will cost from $2 to $6 per square foot. For example, laying a 600-square-foot driveway will cost approximately $283 in materials.
How long does it take for asphalt to cure?
Because asphalt sets and hardens more quickly, it cures in a few days and can be driven on in three to five days. Due to the high moisture content in new concrete, a freshly poured driveway must cure for seven days before it can withstand the weight of a vehicle.
How long does an asphalt driveway last?
With proper maintenance, an asphalt driveway can last about 30 years. Without maintenance, the driveway can be unsightly and perhaps unusable after only five years. Even with a good maintenance record, the durability of asphalt cannot match that of concrete. A concrete driveway, which can last 50 years or more, ...
How long does it take to lay a concrete driveway?
The typical residential concrete driveway takes from one to three days to complete, not including curing time. An asphalt driveway will take about the same length of time to prepare and lay. The curing time, however, is less, as described below.
How much does it cost to build a concrete driveway?
Installing a concrete driveway, on the other hand, will cost $4 to $10 per square foot. Building a 600-square-foot driveway will cost approximately $868 in materials and about $2,126 in labor for a total of $2,994, an overall cost of $4.99 per square foot.
Do you need a foundation for a concrete driveway?
Professional installation is required for both asphalt and concrete driveways due to the labor and specialized equipment required. Also, both types need a strong foundation of gravel before the surface material is spread.
Which is better, asphalt or concrete?
Asphalt holds up better under harsh weather conditions and provides a smoother ride. Concrete can be eroded by salt during winter and has a brushed or tined surface, which is not smooth and can create a noisier ride.
How long does asphalt last?
The typical asphalt road will last 20 – 30 years.
What is the decision making process for selecting paving materials?
The decision making process for selecting paving materials is often based on the initial cost of asphalt vs concrete roads. However, several factors need to go into your evaluation of asphalt vs concrete roads for a new highway or replacement of an existing road.
How long does it take for asphalt to cure?
You’ll be able to drive across your new asphalt surface in three to four days. Concrete, on the other hand, must cure for seven days after it’s poured before it can bear the weight of vehicles.
How much does concrete cost?
Concrete can cost 2-3 times as much as asphalt and about 6X the gravel cost. Concrete can run $5 to $10 per square foot.
What is asphalt made of?
Asphalt is a manufactured aggregate comprised of a smooth blend of bituminous oil, sand, and gravel. When roads are built using asphalt construction, hot asphalt is poured onto a heavier aggregate bed of gravel and pressed into it with a steamroller.
Why does asphalt crack?
Asphalt can soften and crack over time as it is exposed to moisture and sunlight. As water percolates into the asphalt, it widens the cracks leading to distorted and unattractive surfaces.
How much does asphalt cost per ton?
Asphalt cost per ton. Asphalt costs $40 to $80 per ton on average. Asphalt prices vary depending on the mix and material ingredients. One ton of asphalt covers 30 to 80 square feet. A 2-car driveway needs 7.5 to 18 tons of asphalt, depending on the thickness. Asphalt cost per ton by material - chart.
How much does it cost to haul asphalt?
A bulk truckload of asphalt costs $500 to $1,800, including delivery fees. Tandem trucks carry 13 to 20 tons of asphalt that cover 550 to 850 square feet with a layer 3 to 5 inches thick. Prices vary according to the asphalt-delivery distance.
What is the difference between asphalt and blacktop?
The terms “asphalt” and “blacktop” are slightly different. Highway pavers use asphalt, which contains less stone than real blacktop. Blacktops are used for residential areas with less traffic, are easier to repair, and more durable than asphalt.
How much does it cost to rent an asphalt paving machine?
Renting an asphalt paving machine costs $750 to $3,600 per day on average. Asphalt roller rental costs $120 to $700 per day for ride-on compactors 3 to 4-foot wide. Renting asphalt paving machinery sometimes requires a commercial driver’s license and additional training.
How much does a 50 lb bag of asphalt cost?
A 50 lb. bag of cold-patch asphalt costs $8 to $20 and covers 5 to 7 square feet at a 1" depth. Cold-patch asphalt is the only DIY-friendly option that cures by compaction alone.
How many tons of asphalt is in a cubic yard?
There are typically 2 tons in 1 cubic yard, depending on the mixture's density. A cubic yard covers 65 to 110 square feet with an asphalt layer 3 to 5 inches deep.
Is reclaimed asphalt lighter than new asphalt?
Reclaimed asphalt is lighter in color than new black asphalt.
Why is concrete used instead of asphalt?
Streets and driveways paved with concrete instead of asphalt are much less likely to have potholes , and the surface of the concrete provides more friction to prevent vehicle skidding , which ensures greater safety for drivers on the roads.
Is concrete better than asphalt?
Rigid concrete will provide you with much more durability than asphalt. Streets and driveways paved with concrete instead of asphalt are much less likely to have potholes , and the surface of the concrete provides more friction to prevent vehicle skidding, which ensures greater safety for drivers on the roads.
Vulcan Materials Company (NYSE: VMC)
Vulcan Materials Co., headquartered in Birmingham, Alabama, provides basic materials and supplies for the infrastructure and construction industry through several segments, including aggregates, asphalt, concrete, and calcium.
Nucor Corporation (NYSE: NUE)
Nucor Corp., the largest steel manufacturer in the U.S., and one of the most consistently profitable is headquartered in Charlotte, North Carolina. Nucor manufactures steel and steel products through a few segments: steel mills, steel products, and raw materials.
Summit Materials Inc. (NYSE: SUM)
Summit Materials Inc., headquartered in Denver, Colorado, is a construction materials company. Summit Materials manufactures construction materials and related downstream products in several segments, including its supplies aggregates, ready mix concrete, asphalt paving mix and paving, and related services.
Asphalt vs Concrete Roads – How They Are Made
Long Term Durability and Maintenance Costs
How Climate Affects Which Road Type You Need
Impact of Traffic Type and Quantity
Environmental Impact
Asphalt vs Concrete Roads: A Side-by-Side Comparison
- Choose a full-size contractor able to do large-scale roadway construction that is reputable, has been established for some time, and offers a guarantee on their work. 1. The cheapest contractor is usually not the best contractor for the job. However, the highest-priced contractor does not always mean they are the best. Be sure you get estimates fro...
as with All Large Projects, Do Your homework.