How much asphalt do I need calculator?
To use the asphalt Calculator, simply enter the width, length, and thickness (in inches) of your job. Next, click on the "Calculate" button. The calculator will estimate the number of tons of Hot Mix (asphalt) that will be required.
How much does asphalt cost per square foot?
Asphalt cost: $4.00 per square foot. This can vary depending on how thick it’s applied and the region in which you live. Special features: The calculator above assumes the cost of a Chip Seal top coat, stamped surface or color asphalt at $4.00 per square foot. This is probably a tad on the high side, but is within range.
How do you calculate asphalt?
The Marshall mix design method consists of 6 basic steps:
- Aggregate selection.
- Asphalt binder selection.
- Sample preparation (including compaction)
- Stability determination using the Hveem Stabilometer.
- Density and voids calculations.
- Optimum asphalt binder content selection.
What is the formula for asphalt?
Production
- Oil sands. Naturally occurring crude bitumen impregnated in sedimentary rock is the prime feed stock for petroleum production from " oil sands ", currently under development in Alberta, Canada.
- Alternatives and bioasphalt. ...
- Albanian deposits. ...
How do you calculate square footage for asphalt?
How to Calculate Asphalt TonnageUse a tape measure to determine distances. ... Convert the length, width and height measurements to feet by dividing by 12, since each foot contains 12 inches. ... Multiply the length times the width times the depth to obtain the volume in cubic feet of the space to be paved.More items...
How many square feet are in a ton of asphalt?
One ton of asphalt covers 30 to 80 square feet. A 2-car driveway needs 7.5 to 18 tons of asphalt, depending on the thickness.
How much asphalt do I need?
Multiply the length, width and depth together to get your number of cubic feet. Then multiply cubic feet by 145 to know how many pounds of asphalt you will need. Divide pounds by 2,000, the number of pounds in one ton. This will give you the number of tons of asphalt needed for your project.
How do you calculate asphalt cost?
To determine the total asphalt cost for your project, all you need to do is to multiply the total asphalt weight required by the cost per weight of the asphalt you are purchasing.
How do you convert tons to SF?
Manual CalculatorMultiply the length of the area by the width of the area = Square Feet.Multiply Square Feet by the Depth* = Cubic Feet.Divide Cubic Feet by 27 = Cubic Yards.Multiply Cubic Yards by 1.5 = Tons Needed.
Why is asphalt so expensive?
Unfortunately, thanks to the unstable economy, sulphur fuel regulations, trade restrictions and the promise of more tariffs, construction industry experts predict the cost for raw materials like asphalt and concrete will skyrocket in the coming year.
How do you calculate paved driveway?
For example, a 10′ wide x 20′ long driveway with a depth of 3″ would be 50 cubic feet. To find the amount of asphalt needed, multiply the cubic footage by 145 to find the total weight needed, then divide by 2,000.
How much asphalt is needed for a driveway?
Residential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate.
How do you measure for asphalt driveway?
Measure the length of your driveway in linear feet. Measure the width of your driveway in linear feet. Multiply the length x width to calculate the total square footage of your driveway.
How much is a 700 ft driveway?
For a larger driveway or thicker base, the cost will be higher. For example, a driveway 15 feet wide by 700 feet long with a six inch base will need approximately 25 tons of gravel, at a material cost of about $700. With delivery, the total cost will be around $1000.
How do you calculate asphalt on a road?
Formula for Calculation of Asphalt in Road: Calculate the Area of Asphalt (Area of Asphalt and Area of Green Belt) Calculate Volume of Asphalt = (Area * Thickness) m^3. Find out the density of Asphalt (145 lbs/cft to 2330 Kg/m3) Calculate the quantity of Asphalt= ( Density* Volume)/1000.
What is the asphalt price index?
2022 State IndexesStateJanMarCalifornia$404.70$507.20Colorado$436.23$628.91Connecticut$512.50$578.00Delaware$545.00$605.0042 more rows
How long does asphalt last?
You will need another tarmac calculator if the density differs significantly in your case. Most asphalt, hot mix asphalt included, has a lifespan of over 20 years if applied and maintained appropriately, and if it is not subject to significantly higher loads than it was planned for.
What is asphalt used for?
Asphalt is used for bituminous waterproofing products, where it is a part of roofing felt and is used for sealing flat roofs.
What can be added to hot mix asphalt?
Recycled polymers (e.g., rubber tyres) may be added to the hot mix asphalt to modify its properties depending on the intended ultimate application. Asphalt is usually sold by the tonne from companies specializing in construction, usually road construction and roof water-proofing.
What is the best mix for driveways?
Driveway Mix Asphalt. Cheaper mix that is tailored to use in driveways and parking lots. It includes crushed stone, sand and gravel. Porous Asphalt. It is designed only with crushed stone and a few grains of sand in the mix, making it permeable to water. More expensive, but removes the need for drainage.
How much is a ton?
The ton is currently only used in the United States and is equal to 2000 pounds (2000 lbs).
Is asphalt a liquid?
Asphalt is a black, very sticky, and highly viscous liquid, or sometimes semi-solid, form of petroleum. It can be found in natural deposits, but is more often the result of refinement, and is classed as a pitch. Asphalt is highly recyclable, providing cost savings and environmental benefits.
Is asphalt recyclable?
Asphalt is highly recyclable, providing cost savings and environmental benefits. Asphalt (tarmac) is widely used as a road surface, be it for highways, inner city and inter-city roads, local roads, car parks, for paving driveways and pavements. These are the primary reasons people are using our calculator as well.
How thick should a surface be for asphalt?
The thickness should be about two inches as it is considered a standard for asphalt overlays and surface courses. Two-inch thickness has the potential to properly bonds the surface course to the binder course. If the thickness is less than two-inch it will cause raveling, cracking, and other asphalt issues.
What is hot mix asphalt?
Hot Mix Asphalt: It is also known as the “Dense-Graded Mix”. This type of asphalt is considered ideal for surfacing and repairing needs. During its production, the binder will be heated at a very high temperature to reduce viscosity. The high temperature will also remove all moisture prior to mixing.
Is asphalt a liquid or semisolid?
Asphalt is a semi-solid form of petroleum and appears in a sticky, black, highly viscous liquid form. It is classified as a pitch and can be found in natural deposits as well as a refined product. If it has a mixture of 95 stone, sand, or gravel that bounds together by asphalt cement, then it will be known as hot mix asphalt. ...
What is asphalt pavement?
Asphalt is a flexible pavement built in multiple layers with a continuous flow of material moving through the asphalt paver.Asphalt has low initial costs, lasts longer, and due to its recyclability, has residual value greater than other pavements.The smooth surface of asphalt provides maximum tire contact with the roadway, increasing skid resistance. The dark color of asphalt reduces glare, helps melt snow and ice, and provides a high contrast for lane markings. Asphalt pavements are fast to construct. Because asphalt effectively needs no “cure” time, motorists can use roadways as soon as the last roller leaves the construction zone.
What is asphalt used for?
Asphalt is a mixture of aggregates, binder and filler, used for constructing and maintaining roads, parking areas, railway tracks, ports, airport runways, bicycle lanes, sidewalks and also play- and sport areas.Aggregates used for asphalt mixtures could be crushed rock, sand, gravel or slags.
What is the purpose of binder in asphalt?
Nowadays, certain waste and by-products, such as construction and demolition debris, are being used as aggregates, which increases the sustainability of asphalt.In order to bind the aggregates into a cohesive mixture a binder is used.
How much does it cost to install asphalt?
Asphalt paving material usually costs $40-80 a ton. One ton will cover 30 to 80 square feet. A residential driveway averages 9-24 square feet. Other materials are needed for asphalt driveway installation as well, and will affect the final cost.
How much does a paver driveway cost?
They offer a wide variety of designs, shapes, sizes, and colors. A paver driveway will cost between $13-15 per square foot. A poured concrete driveway ranges from $7-9 per sq ft.
What is the most expensive option to have a driveway removed?
Repaving. Repaving your driveway requires removing the old driveway completely. This is the most expensive option, because you will be paying to have the old driveway removed and a new driveway installed. This is of course the most expensive option, but a paved driveway has a lifespan.
What is resurfacing a driveway?
Resurfacing is the middle ground of driveway repair. It’s also known as asphalt overlay. In many cases, this can repair significant asphalt cracks. Existing asphalt is covered with a new layer of asphalt, in a process similar to the original driveway.
Why does asphalt crack?
Over time, the heat from the sun’s rays will begin to break down the materials in the asphalt and remove moisture. As the asphalt weakens due to the sun, cracks begin to form.
How long can you drive on a driveway after it's installed?
You won’t be able to drive on our driveway for 3-5 days after it’s installed. You’ll need to avoid parking on the driveway for the first 14 days, particularly in the hot part of the day.
What is the cheapest driveway?
A gravel driveway is the cheapest option if you need a new driveway, at $1-3 per sq ft. It matches with any style of home. Classic gray gravel is well suited to a winding country drive. White gravel provides a modern look.
How much does tile cost?
Due to the numerous varieties of tile, there is an incredibly large price range, from 60 cents per square foot, to hundreds of dollars, or even $100,000 per square foot. The many options of tile allow a person to choose a cost and style that best fits their needs. Tile is also easy to maintain, clean, and is suitable for all locations. However, without heating, tile can be cold in the winter. It also does not dampen sound, can be slippery when wet, can break if heavy objects are dropped on them, and cannot easily be repaired. Tile installation is also difficult, and installation costs can be more expensive than the cost of the materials.
How much does primer cover?
While the amount of coverage provided by primer or paint depends heavily on method of application, type, and brand of paint, primer generally covers less area than paint, and estimated coverage amounts can range from anywhere between 200-400 square feet per gallon.
What is wood flooring?
Wood Flooring. Wood flooring includes woods such as hardwood, engineered wood (also known as composite or man-made wood), and bamboo, though bamboo is actually classified as a grass. Hardwood flooring is highly durable, easy to clean, and can be found in a variety of different appearances.
Do houses of the same size vary in building cost?
As previously mentioned, houses of the same size do vary significantly in building cost. Thus, having a reference can help a prospective owner decide whether or not to include an elegant master bath, marble tiles, curved staircases, or any other more extravagant features.
What is square meters?
Square meters is also a common measure of area. Assume you have a rectangular area such as a room and, for example, you want to calculate the square footage area for flooring or carpet.
How to convert inches to feet?
If you measured in another unit of measure, do the following to convert to feet. - inches: divide by 12 and that is your measurement in feet. - yards: multiply by 3 and that is your measurement in feet. - centimeters: multiply by 0.03281 to convert to feet. - meters: multiply by 3.281 to convert to feet.