Paving a two-lane (24'-wide) asphalt road costs $70 to $170 per linear foot or $370,000 to $900,000 per mile. Blacktop road construction costs more than driveways because roads need 5" to 11" thick asphalt. Cost to pave an asphalt road - chart Contractors paving private asphalt road Cost to pave an asphalt parking lot
How much should an asphalt driveway cost?
Typical costs: CostHelper readers report paying $2,300-$10,300 to install a new asphalt driveway or completely remove replace an old one, or $1.67-$2.72 a square foot, with an average cost of $2.24 a square foot.
How do you calculate the price of asphalt?
Why Does Asphalt Crack?
- The Sun. The sun is one of asphalt’s worst enemies. ...
- Moisture. Moisture beneath the surface of the asphalt causes the gravel base to shift. ...
- Ground Movement. In addition to the ground movement caused by moisture, temperature changes also create movement. ...
How much does a mile of road actually cost?
From the looks of a general Googling, you could set the price at 1d20+6 million dollars per mile for four lane (heavy through traffic) type roads or 1d10+4 million dollars per mile for two lane (local traffic) type roads.
How much does it cost to build a mile of road?
Nonetheless, here are the daunting numbers: constructing a two-lane, undivided road in a rural locale will set you back somewhere between $2 and $3 million per mile — in urban areas, that number jumps to between $3 and $5 million.
How much does it cost to remove asphalt?
Removing or milling the top layer of asphalt costs $0.25 to $0.75 per square foot. Milling before resurfacing creates a uniform pavement depth in severely damaged asphalt. Milling also levels new paving with the surrounding apron, sidewalk, and garage transitions.
How much does stamped asphalt cost?
Colored or stamped asphalt overlays cost $3 to $8 per square foot total. Stamped asphalt mimics the look of stone or brick pavers. After resurfacing, contractors compact a wire template onto the hot asphalt. Coloring is either a surface coating or colored-rock paving additive.
How much does it cost to resurface an asphalt driveway?
Stamping, patterns, or colored asphalt resurfacing costs $3 to $8 per square foot. The average cost to resurface an asphalt driveway is $400 to $1,800, depending on the blacktop size and condition.
How long does asphalt last?
Asphalt resurfacing lasts 8 to 15 years on average. However, a newly reconstructed asphalt pavement lasts between 20 and 30 years with proper maintenance. Resurfacing is only a long-lasting solution when the original pavement foundation is strong.
How much does it cost to install a gravel driveway?
A gravel driveway costs $1 to $3 per square foot or $600 to $1,800 for a 24×24 (2-car) driveway. Installing gravel is easier and typically includes minor grading and leveling. Return to Top.
How much does it cost to resurface a parking lot?
The average cost to resurface a parking lot is $1 to $3 per square foot or $300 to $900 per parking space. The average parking space needs 300 square feet to include room for the stall, lanes, entrances, and exits. Additional fees for inspections and permits vary by city.
Calculating the Cost of Road Maintenance
The reality is that maintenance costs depend on the answers to a whole host of questions: What’s the road made of, and what’s its current condition? Where is it located, and how much precipitation does it see on average? How wide is it? Does it include bridges or mountain underpasses?
Frank Elswick
Frank is the sales unit manager of Midwest's road construction and natural paving markets.
How much does asphalt cost per square foot?
Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.
How much does it cost to install an asphalt driveway?
Other sources estimate the cost to install an asphalt driveway to be between $2,300 and $10,300. Homeowners typically pay per square foot. Reibling adds the average cost per square foot is between $3.50 and $4.50.
How much does it cost to resurface a 4 lane road?
As I mentioned, it's much less expensive to maintain existing roadways. To mill and resurface a 4-lane road, it costs an average of $1.25 million per mile. Then, if you want to expand said road from four lanes to six, you can expect to pay roughly $4 million.