asphalt pricing 2021

Full Answer

What is the current price of asphalt?

Asphalt prices. Asphalt prices are $40 to $80 per ton on average or $0.75 to $2.00 per square foot.Asphalt materials for a 2-car (24’x24’) driveway cost $600 to $1,100.Asphalt prices depend on the quality, volume, delivery fees, and if it's hot-mix, cold-mix, porous, recycled, or crushed.

How much does asphalt cost per square yard?

Yard Clean-Up . The average cost of yard clean-up ranges from $200 to $500. You could pay as little as $150 for basic debris removal, but you could pay more for more significant clean-up and landscaping work. Once a stump is removed, you will want to spruce up the yard and get things looking good again.

How much does it cost to pave a driveway?

‘Before you can pave your new driveway, you’ll have to get the land ready, which usually costs between $5 and $8 per square foot,’ says Bailey. ‘This step includes evening out the land to help prevent serious problems from happening down the road.’

How much does it cost to Blacktop a driveway?

‘ Paving a new driveway costs an average of $4,482, but typically falls in the range of $2,403 to $6,563,’ says Bailey Carson, home care expert at Angi.

What is the asphalt price index?

2022 State IndexesStateJanMarCalifornia$404.70$507.20Colorado$436.23$628.91Connecticut$512.50$578.00Delaware$545.00$605.0042 more rows

How much will a ton of asphalt cover?

Asphalt cost per ton One ton of asphalt covers 30 to 80 square feet. A 2-car driveway needs 7.5 to 18 tons of asphalt, depending on the thickness.

How do you calculate the cost of an asphalt driveway?

For the simplest estimate, you can use this formula.Length x width=Square footage of the driveway.Driveway sq ft x $3= low end cost.Driveway sq ft x 7= high end cost.Driveway sq ft x $2= low end cost.Driveway sq ft x $4= high end cost.When to reseal your driveway:When to repave your driveway:

Is 2 inches of asphalt enough?

Two inches is the industry standard for asphalt overlays and surface courses because it properly bonds the surface course to the binder course. If a surface course is too thin it won't have the surface area and other properties to properly bond which will result in raveling, cracking, and other asphalt issues.

How many tons of asphalt are in a dump truck?

A typical tandem dump truck is limited to about a 13-ton payload in accordance with federal bridge law. Increased truck capacity is important when directly unloading into the asphalt paver.

How many yards are in a ton of crushed asphalt?

Calculate Asphalt MillingsCoverage (Square feet)400sq ftVolume (Cubic feet)67cu ftVolume (Cubic yards)2.5cu ydEstimated amount (Pounds)5,951lbEstimated amount (Tons)2.98ton2 more rows

How much is a 700 ft driveway?

For a larger driveway or thicker base, the cost will be higher. For example, a driveway 15 feet wide by 700 feet long with a six inch base will need approximately 25 tons of gravel, at a material cost of about $700. With delivery, the total cost will be around $1000.

How thick should a asphalt driveway be?

2 to 3 inchesResidential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate.

Is asphalt the same as blacktop?

Blacktop is heated to approximately 150 degrees celsius, whereas asphalt is only heated to 120 degrees celsius. Asphalt is has a higher bitumen content and for that reason is less porous and more resilient to wear and tear from high traffic and thus is the preferred choice for major highways.

Is there different grades of asphalt?

There are three different grades available in asphalt. The grades available are I-2, also known as base; I-5, known as top ;and the I-4 or commercial top grades. The difference in the tree grades are that the I-2 or base consists of ¾ inches of stone. The base grade is generally used in corn stabilizing level.

How warm does it have to be to pour asphalt?

The best time of year to pave asphalt is during the spring and summer months because the best temperature for hot paving is generally 70 degrees Fahrenheit or higher. It's possible to lay asphalt at temperatures as low as 50 degrees, but doing so isn't likely to bring about the best results possible.

What are the 3 types of asphalt?

There are three main types of asphalt: Hot Asphalt, MC Cold Mix, and UPM. There are also different varieties of these asphalts for summer and winter use.

How much does asphalt cost per ton?

Asphalt cost per ton. Asphalt costs $40 to $80 per ton on average. Asphalt prices vary depending on the mix and material ingredients. One ton of asphalt covers 30 to 80 square feet. A 2-car driveway needs 7.5 to 18 tons of asphalt, depending on the thickness. Asphalt cost per ton by material - chart.

How much does it cost to haul asphalt?

A bulk truckload of asphalt costs $500 to $1,800, including delivery fees. Tandem trucks carry 13 to 20 tons of asphalt that cover 550 to 850 square feet with a layer 3 to 5 inches thick. Prices vary according to the asphalt-delivery distance.

How much does it cost to rent an asphalt paving machine?

Renting an asphalt paving machine costs $750 to $3,600 per day on average. Asphalt roller rental costs $120 to $700 per day for ride-on compactors 3 to 4-foot wide. Renting asphalt paving machinery sometimes requires a commercial driver’s license and additional training.

How much does a 50 lb bag of asphalt cost?

A 50 lb. bag of cold-patch asphalt costs $8 to $20 and covers 5 to 7 square feet at a 1" depth. Cold-patch asphalt is the only DIY-friendly option that cures by compaction alone.

How many tons of asphalt is in a cubic yard?

There are typically 2 tons in 1 cubic yard, depending on the mixture's density. A cubic yard covers 65 to 110 square feet with an asphalt layer 3 to 5 inches deep.

What is the difference between asphalt and blacktop?

The terms “asphalt” and “blacktop” are slightly different. Highway pavers use asphalt, which contains less stone than real blacktop. Blacktops are used for residential areas with less traffic, are easier to repair, and more durable than asphalt.

How Much Does an Asphalt Driveway Cost?

The average cost for an asphalt driveway is $4,996, but that will vary depending on several factors, including the size of your driveway, how deep of a layer of asphalt you want for your driveway, and even the type of asphalt.

Cost Estimator by Driveway Size

The size of your driveway is the biggest factor in determining the cost of your asphalt driveway. Expect to be charged at least $3,258 for an average-sized driveway at an average price. Sometimes the costs of labor will be added, sometimes they are included. Here we’ll break down the costs by square foot, ton, and labor hours.

Other Factors Affecting Cost

Your final bill for your asphalt driveway is going to depend on a lot of factors, including the depth of your asphalt layer, any decorative (stamped asphalt) or extraordinary (heated driveway) features, and the cost of substrate.

Services Often Bundled With Asphalt Driveways

Other outdoor services are often bundled with the installation of an asphalt driveway. Most of these additional services (tree removal or land grading, for example) involve preparing the land for your driveway.

Costs of a DIY Asphalt Driveway

You may be tempted to install your own asphalt driveway. Resist the temptation. This is going to be an enormous project. But if you think you’d like to DIY your asphalt driveway, we’ll outline the pros and cons as well as costs and materials required.

Conclusion

An asphalt driveway will cost you anywhere from $3,086 to $7,912, with an average cost of $4,996. Note that the price of any add-on services will increase your final bill.

About Us

LawnStarter is a startup making lawn care easy affordable and reliable. Follow this blog to stay tuned with what you need to keep your lawn in tip-top shape year-round.

How much does stamped asphalt cost?

Colored or stamped asphalt costs $5 to $15 per square foot for a new driveway or replacement, or $3 to $8 per square foot for resurfacing the top layer. A 20x20 stamped asphalt driveway costs $2,400 to $6,000. Decorative patterns are sealcoated, which colors and protects the surface.

How much does it cost to lay asphalt over concrete?

Laying new asphalt over a concrete driveway costs $1 to $3 per square foot. Contractors fill cracks with concrete-repair caulk before paving. Resurfacing concrete with asphalt is cheaper than replacing concrete. However, special preparation is required to stabilize the concrete and prevent cracks.

How thick should a driveway be?

A new residential driveway needs 3 to 5 inches of asphalt over 4 to 8 inches of rock-base foundation to withstand temperature changes and last 20+ years. Some companies recommend a 2" thickness to save $0.50 to $1 per square foot, but won't provide a warranty due to deterioration risks.

How much does it cost to repave an asphalt driveway?

The average cost to repave an asphalt driveway is $4 to $10 per square foot with a new gravel base or $3 to $7 per square foot with an existing base. Repaving a 2-car (20’x20’) asphalt driveway costs $1,600 to $4,000 on average. Repaving includes removing and hauling away the existing asphalt.

How long does asphalt last?

An asphalt driveway lasts 15 to 30 years and requires sealcoating every 3 to 5 years. Boosts curb appeal and resale value. A new asphalt driveway needs an asphalt layer 3" to 5" thick to last. Resurfacing only the top layer or asphalt overlay costs $1 to $3 per square foot.

How much does it cost to pave a road?

Cost to pave an asphalt road. The average cost to pave a private one-lane asphalt road is $35 to $85 per linear foot. Paving a two-lane (24'-wide) asphalt road costs $70 to $170 per linear foot or $370,000 to $900,000 per mile. Blacktop road construction costs more than driveways because roads need 5" to 11" thick asphalt.

How much does it cost to install asphalt curbs?

Asphalt curbing costs $3 to $6 per linear foot to install. Adding asphalt curbing to a 400-square-foot driveway costs $120 to $240. Repairing or replacing asphalt curbs costs $8 to $15 per linear foot on average. Total costs depend on curb thickness, styles, and labor.