Reviewed and approved on December 17, 2020, by Tom Grupa and 3 expert asphalt pavers on HomeGuide. Asphalt prices are $40 to $80 per ton on average or $0.75 to $2.00 per square foot. Asphalt materials for a 2-car (24’x24’) driveway cost $600 to $1,100.
What is the current price of asphalt?
Asphalt prices. Asphalt prices are $40 to $80 per ton on average or $0.75 to $2.00 per square foot.Asphalt materials for a 2-car (24’x24’) driveway cost $600 to $1,100.Asphalt prices depend on the quality, volume, delivery fees, and if it's hot-mix, cold-mix, porous, recycled, or crushed.
How much does asphalt cost per square yard?
Yard Clean-Up . The average cost of yard clean-up ranges from $200 to $500. You could pay as little as $150 for basic debris removal, but you could pay more for more significant clean-up and landscaping work. Once a stump is removed, you will want to spruce up the yard and get things looking good again.
How much does it cost to pave a driveway?
‘Before you can pave your new driveway, you’ll have to get the land ready, which usually costs between $5 and $8 per square foot,’ says Bailey. ‘This step includes evening out the land to help prevent serious problems from happening down the road.’
How much does it cost to Blacktop a driveway?
‘ Paving a new driveway costs an average of $4,482, but typically falls in the range of $2,403 to $6,563,’ says Bailey Carson, home care expert at Angi.
What is the asphalt price index?
2022 State IndexesStateJanMarCalifornia$404.70$507.20Colorado$436.23$628.91Connecticut$512.50$578.00Delaware$545.00$605.0042 more rows
How do you calculate the cost of an asphalt driveway?
For the simplest estimate, you can use this formula.Length x width=Square footage of the driveway.Driveway sq ft x $3= low end cost.Driveway sq ft x 7= high end cost.Driveway sq ft x $2= low end cost.Driveway sq ft x $4= high end cost.When to reseal your driveway:When to repave your driveway:
How much does a top coat of asphalt cost?
Asphalt Overlay Cost An asphalt overlay, also called a top coat, usually costs $3 to $7 per square foot. It's less expensive because an overlay requires fewer materials and less labor.
Is it cheaper to do asphalt or concrete?
Cost. The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.
How much is a 700 ft driveway?
For a larger driveway or thicker base, the cost will be higher. For example, a driveway 15 feet wide by 700 feet long with a six inch base will need approximately 25 tons of gravel, at a material cost of about $700. With delivery, the total cost will be around $1000.
How thick should a asphalt driveway be?
2 to 3 inchesResidential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate.
How much does a ton of asphalt cover?
Asphalt cost per ton One ton of asphalt covers 30 to 80 square feet. A 2-car driveway needs 7.5 to 18 tons of asphalt, depending on the thickness.
Why is asphalt so expensive?
Unfortunately, thanks to the unstable economy, sulphur fuel regulations, trade restrictions and the promise of more tariffs, construction industry experts predict the cost for raw materials like asphalt and concrete will skyrocket in the coming year.
Is asphalt the same as blacktop?
Blacktop is heated to approximately 150 degrees celsius, whereas asphalt is only heated to 120 degrees celsius. Asphalt is has a higher bitumen content and for that reason is less porous and more resilient to wear and tear from high traffic and thus is the preferred choice for major highways.
What type of asphalt is best for driveways?
Hot mix asphaltHot mix asphalt is considered best for driveways, because construction and design features are suitable to giving it a finished appearance that complements the home.
What is the cheapest way to do a driveway?
A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway's sub-base is sound.
Can asphalt be put over concrete?
If the question is "CAN I lay asphalt over concrete?" then the answer is "Yes." This is absolutely possible if elevations allow for it, and we're happy to lay asphalt driveways over concrete if that's what you want. It's also the cheaper option since heavy equipment is required to dig up an existing concrete slab.
How long does asphalt last?
If properly taken care of, your asphalt paving project can last up to 40 years. In terms of numbers, on average, an asphalt driveway can range from $2,500 to $6,500 depending on size.
What is blacktop asphalt?
Blacktop is a type of asphalt that is typically used for playgrounds, parking lots and game courts. It is mixed using different properties from the asphalt you see in tarmacs including airport runways. Key factors deciding costs include where on the property the project is. Similarly, your asphalt contractors will need to bring in equipment. Is it easily accessible? Does it need to be excavated? To give you an idea, the average blacktop installation cost for a game court can run up to $6,000.
How much does a 600 square foot driveway cost?
A standard base on an average 600 square foot driveway can cost you $2.50 per square foot. A more involved, stronger, thicker base could weigh in at around $3.50 per square foot. Although it will cost you a higher rate up front, ...
How much does a paver cost per square foot?
On the cheaper end of the spectrum, materials for a gravel driveway can weigh in at a few cents per square foot, while on the more expensive end, pavers can potentially tally up to $50 per square foot. We typically recommend asphalt.
Is it better to install asphalt or porous?
From here, you can opt for brand new asphalt, or you can take advantage of today’s technology to cut costs. Porous asphalt breathes easier, making it better for the environment.
Is gravel a good material to install?
While gravel is the cheapest, quickest and easiest to install, its loose particles can be tracked out of place. Rainy season can cause flooding, erosion, and potentially, a project that needs to be repoured. Concrete is durable, but often experiences cracks.
Is asphalt cheaper than concrete?
As we mentioned, asphalt is a convenient, durable option. It is cheaper than concrete, at about a third of the price, but more expensive than gravel. It also requires special equipment and professional installation. Asphalt is a fit for a wide range of projects, from driveways to parking lots, walkways and more.
How much does it cost to install asphalt 1?
Asphalt 1 – asphaltic concrete 3 is usually installed at a depth of no less than 2″. For this project, the asphalt 1 is at 2.5″ and would cost roughly $830 installed. This tends to have a lifespan of 10 to 30 years and will need treatment every six to ten years to maintain its good looks and durability.
How long does asphalt last?
Asphalt paving is widely used because it lasts longer than most types of pavements with a life span of over 20 to 25 years if laid properly. When it is fully replaced by scarification, the scientist has found a way of recycling this by-product of a petroleum refinery, asphalt is the commonest recycled material in the United States ...
What is the mix of asphalt and sand?
Most pavements consist of 5 to 10 % asphalt mixed with 90 to 95% aggregate and sand while macadam the active agent binds them together. Please note that to enhance the pavement surface performance, the temperature of the asphalt must be maintained to the barest minimum to retain its flexibility.
What is the constituent of asphalt?
A Constituent Of Asphalt Pavement. Asphalt pavement is consist of sand, the stone of different sizes, additives and liquid petroleum. Asphalt which is also known as bitumen has macadam which serves as a glue when paving. This is the active binder that makes all other constituent stick together.
What is the greatest strength of asphalt pavement?
Flexibility is the greatest strength of asphalt pavement, allowing the surface to adapt to varying surface changes caused by weather and soil movements. Asphalt pavement is build surface that it does not retain water on its surface.
What is curb appeal in real estate?
Curb appeal is a term often used in Real Estate to describe the way a property looks while standing on the sidewalk, looking back at it. When it comes time to sell your house, curb appeal is an important selling feature. The way your driveway looks plays a big part in how your property looks to the critical eye of the buyer. Your driveway plays a large part in creating curb appeal.
How wide is a driveway?
Usually, 9 to 10 feet wide is enough for a car but if you have a lot of vehicular movement in your house. Then you have to consider a double lane. A driveway typically extends into a truck C road or a street curb into the garage in your home. The square footage is an important factor to consider when determining the cost of the pavement. The cost of renting special equipment make a driveway less than 10 feet costlier than other sizes.
How much does it cost to install an asphalt driveway?
dollars on 2017 (6,649 U.S. dollars). The cost to install an asphalt driveway could be between $2,300 and $10,300 and typically the cost is calculated per square foot.
What is asphalt driveway?
It is also known as blacktop due to its color, asphalt is a mixture of stones and sand, bound together with materials left over during the production of Petrochemicals such as Pertol, Diesel and Gasoline.
How much does it cost to resurface a driveway?
Asphalt resurfacing costs $3 to $7 per square foot compared to $8 to $15 per square foot for replacing. The ideal choice depends on the condition of your existing driveway. If your driveway is in relatively good condition with no potholes, resurfacing can save you $5 to $8 per square foot.
How many square feet does a ton of concrete cover?
One ton material usually covers 40 to 80 square feet. The quantity you need depends on the thickness of the layers such as a 2 inches thick would cost 80 square feet per ton while 4 inches think would cost 40 square feet per ton. For the average driveway, you’ll need 7.5 to 15 tons.
How much does concrete cost?
Basic, construction-grade concrete costs about $5 to $12 per square foot , including installation. If you opt for more fancier, decorative versions such as stamped or colored concrete, then prices go up by few dollars per square feet. However, high-end concrete could cost as much as $15 per square foot.
Does asphalt stain floors?
Oily texture – Asphalt has an oily texture that softens in heat or direct sunlight. If the asphalt gets stuck to your shoes and you track it through the house, it can stain your floors. Rough edges – WIth asphalt, it can be difficult to get a straight, clean edge. Concrete Driveway Cost Per Square Foot.
Is asphalt good for cold weather?
Suitable for Cold Climate – Asphalt is less likely to crack in cold weather. It performs better than concrete in very harsh or snowy climates. Snow removal is also easier with asphalt. Won’t show stains – Because asphalt is generally dark in color, in doesn’t show oil stains.
How Much Does an Asphalt Driveway Cost?
The average cost for an asphalt driveway is $4,996, but that will vary depending on several factors, including the size of your driveway, how deep of a layer of asphalt you want for your driveway, and even the type of asphalt.
Cost Estimator by Driveway Size
The size of your driveway is the biggest factor in determining the cost of your asphalt driveway. Expect to be charged at least $3,258 for an average-sized driveway at an average price. Sometimes the costs of labor will be added, sometimes they are included. Here we’ll break down the costs by square foot, ton, and labor hours.
Other Factors Affecting Cost
Your final bill for your asphalt driveway is going to depend on a lot of factors, including the depth of your asphalt layer, any decorative (stamped asphalt) or extraordinary (heated driveway) features, and the cost of substrate.
Services Often Bundled With Asphalt Driveways
Other outdoor services are often bundled with the installation of an asphalt driveway. Most of these additional services (tree removal or land grading, for example) involve preparing the land for your driveway.
Costs of a DIY Asphalt Driveway
You may be tempted to install your own asphalt driveway. Resist the temptation. This is going to be an enormous project. But if you think you’d like to DIY your asphalt driveway, we’ll outline the pros and cons as well as costs and materials required.
Conclusion
An asphalt driveway will cost you anywhere from $3,086 to $7,912, with an average cost of $4,996. Note that the price of any add-on services will increase your final bill.
About Us
LawnStarter is a startup making lawn care easy affordable and reliable. Follow this blog to stay tuned with what you need to keep your lawn in tip-top shape year-round.
How much does stamped asphalt cost?
Colored or stamped asphalt costs $5 to $15 per square foot for a new driveway or replacement, or $3 to $8 per square foot for resurfacing the top layer. A 20x20 stamped asphalt driveway costs $2,400 to $6,000. Decorative patterns are sealcoated, which colors and protects the surface.
How much does it cost to lay asphalt over concrete?
Laying new asphalt over a concrete driveway costs $1 to $3 per square foot. Contractors fill cracks with concrete-repair caulk before paving. Resurfacing concrete with asphalt is cheaper than replacing concrete. However, special preparation is required to stabilize the concrete and prevent cracks.
How thick should a driveway be?
A new residential driveway needs 3 to 5 inches of asphalt over 4 to 8 inches of rock-base foundation to withstand temperature changes and last 20+ years. Some companies recommend a 2" thickness to save $0.50 to $1 per square foot, but won't provide a warranty due to deterioration risks.
How much does it cost to repave an asphalt driveway?
The average cost to repave an asphalt driveway is $4 to $10 per square foot with a new gravel base or $3 to $7 per square foot with an existing base. Repaving a 2-car (20’x20’) asphalt driveway costs $1,600 to $4,000 on average. Repaving includes removing and hauling away the existing asphalt.
How long does asphalt last?
An asphalt driveway lasts 15 to 30 years and requires sealcoating every 3 to 5 years. Boosts curb appeal and resale value. A new asphalt driveway needs an asphalt layer 3" to 5" thick to last. Resurfacing only the top layer or asphalt overlay costs $1 to $3 per square foot.
How much does it cost to pave a road?
Cost to pave an asphalt road. The average cost to pave a private one-lane asphalt road is $35 to $85 per linear foot. Paving a two-lane (24'-wide) asphalt road costs $70 to $170 per linear foot or $370,000 to $900,000 per mile. Blacktop road construction costs more than driveways because roads need 5" to 11" thick asphalt.
How much does it cost to install asphalt curbs?
Asphalt curbing costs $3 to $6 per linear foot to install. Adding asphalt curbing to a 400-square-foot driveway costs $120 to $240. Repairing or replacing asphalt curbs costs $8 to $15 per linear foot on average. Total costs depend on curb thickness, styles, and labor.