How much does asphalt cost per cubic yard?
Asphalt costs $80 to $160 per cubic yard. There are typically 2 tons in 1 cubic yard, ...
How to calculate asphalt cost?
Input:
- First, select one of the five options from the drop-down menu to calculate or calculate with Length, width, area, volume, density, thickness, and dirt need to remove.
- After selecting the required field, enter the values with corresponding units from the drop-down list.
- Hit Calculate button.
What is the current price of asphalt?
Asphalt prices. Asphalt prices are $40 to $80 per ton on average or $0.75 to $2.00 per square foot.Asphalt materials for a 2-car (24’x24’) driveway cost $600 to $1,100.Asphalt prices depend on the quality, volume, delivery fees, and if it's hot-mix, cold-mix, porous, recycled, or crushed.
What is the average price of asphalt?
"And, it was a brick street underneath, so it uses more asphalt. The cost is maybe $200, or 15 to 20% of the total cost." Morehead said suggestions from the public and council members for the second list may have elevated two or three short streets onto ...
How do you calculate the cost of an asphalt driveway?
For the simplest estimate, you can use this formula.Length x width=Square footage of the driveway.Driveway sq ft x $3= low end cost.Driveway sq ft x 7= high end cost.Driveway sq ft x $2= low end cost.Driveway sq ft x $4= high end cost.When to reseal your driveway:When to repave your driveway:
Is it cheaper to pour asphalt or concrete?
Cost. The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.
How much does black top cost?
Blacktop Driveway Cost by GradeAsphalt GradeAverage Cost per Sq.Ft. (Material Only)Base I-2$1 - $2/sq.ft.Top I-5$1 - $4/sq.ft.Commercial top I-4$3 - $5/sq.ft.Jan 2, 2022
Why is asphalt so expensive?
Unfortunately, thanks to the unstable economy, sulphur fuel regulations, trade restrictions and the promise of more tariffs, construction industry experts predict the cost for raw materials like asphalt and concrete will skyrocket in the coming year.
Is asphalt the same as blacktop?
Blacktop is heated to approximately 150 degrees celsius, whereas asphalt is only heated to 120 degrees celsius. Asphalt is has a higher bitumen content and for that reason is less porous and more resilient to wear and tear from high traffic and thus is the preferred choice for major highways.
What is the cheapest way to do a driveway?
A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway's sub-base is sound.
How much does a ton of asphalt cover?
Asphalt cost per ton One ton of asphalt covers 30 to 80 square feet. A 2-car driveway needs 7.5 to 18 tons of asphalt, depending on the thickness.
Can you pave driveway yourself?
The process of paving with asphalt is not difficult, but proper asphalt installation requires heavy equipment that most homeowners do not possess. You might not be able to install asphalt by yourself, but understanding the operation will allow you to ensure that your hired contractor is doing it correctly.
Is concrete driveway better than asphalt?
Concrete driveways normally last longer than asphalt. In general, if installed properly in a suitable climate and maintained regularly, your concrete driveway should last 30 to 40 years, while an asphalt driveway is generally good for 20 to 30 years.
Can you asphalt over concrete?
If you've been thinking about updating your driveway or parking lot, you might be wondering if asphalt can be paved right over the top of the concrete. Well, the answer is yes! It is safe to pave asphalt over concrete.
Why do they put asphalt over concrete?
When it comes down to it we recommend asphalt driveways over concrete for three main reasons: It has faster installation. It has better resistance to weather. It is more cost-effective.
What is the asphalt price index?
2022 State IndexesStateJanMarCalifornia$404.70$507.20Colorado$436.23$628.91Connecticut$512.50$578.00Delaware$545.00$605.0042 more rows
How much does it cost to lay asphalt over concrete?
Laying new asphalt over a concrete driveway costs $1 to $3 per square foot. Contractors fill cracks with concrete-repair caulk before paving. Resurfacing concrete with asphalt is cheaper than replacing concrete. However, special preparation is required to stabilize the concrete and prevent cracks.
How much does stamped asphalt cost?
Colored or stamped asphalt costs $5 to $15 per square foot for a new driveway or replacement, or $3 to $8 per square foot for resurfacing the top layer. A 20x20 stamped asphalt driveway costs $2,400 to $6,000. Decorative patterns are sealcoated, which colors and protects the surface.
How thick should a driveway be?
A new residential driveway needs 3 to 5 inches of asphalt over 4 to 8 inches of rock-base foundation to withstand temperature changes and last 20+ years. Some companies recommend a 2" thickness to save $0.50 to $1 per square foot, but won't provide a warranty due to deterioration risks.
How much does it cost to repave an asphalt driveway?
The average cost to repave an asphalt driveway is $4 to $10 per square foot with a new gravel base or $3 to $7 per square foot with an existing base. Repaving a 2-car (20’x20’) asphalt driveway costs $1,600 to $4,000 on average. Repaving includes removing and hauling away the existing asphalt.
How long does asphalt last?
An asphalt driveway lasts 15 to 30 years and requires sealcoating every 3 to 5 years. Boosts curb appeal and resale value. A new asphalt driveway needs an asphalt layer 3" to 5" thick to last. Resurfacing only the top layer or asphalt overlay costs $1 to $3 per square foot.
How much does it cost to pave a road?
Cost to pave an asphalt road. The average cost to pave a private one-lane asphalt road is $35 to $85 per linear foot. Paving a two-lane (24'-wide) asphalt road costs $70 to $170 per linear foot or $370,000 to $900,000 per mile. Blacktop road construction costs more than driveways because roads need 5" to 11" thick asphalt.
How much does it cost to install asphalt curbs?
Asphalt curbing costs $3 to $6 per linear foot to install. Adding asphalt curbing to a 400-square-foot driveway costs $120 to $240. Repairing or replacing asphalt curbs costs $8 to $15 per linear foot on average. Total costs depend on curb thickness, styles, and labor.
How Much Does an Asphalt Driveway Cost?
The average cost for an asphalt driveway is $4,996, but that will vary depending on several factors, including the size of your driveway, how deep of a layer of asphalt you want for your driveway, and even the type of asphalt.
Cost Estimator by Driveway Size
The size of your driveway is the biggest factor in determining the cost of your asphalt driveway. Expect to be charged at least $3,258 for an average-sized driveway at an average price. Sometimes the costs of labor will be added, sometimes they are included. Here we’ll break down the costs by square foot, ton, and labor hours.
Other Factors Affecting Cost
Your final bill for your asphalt driveway is going to depend on a lot of factors, including the depth of your asphalt layer, any decorative (stamped asphalt) or extraordinary (heated driveway) features, and the cost of substrate.
Services Often Bundled With Asphalt Driveways
Other outdoor services are often bundled with the installation of an asphalt driveway. Most of these additional services (tree removal or land grading, for example) involve preparing the land for your driveway.
Costs of a DIY Asphalt Driveway
You may be tempted to install your own asphalt driveway. Resist the temptation. This is going to be an enormous project. But if you think you’d like to DIY your asphalt driveway, we’ll outline the pros and cons as well as costs and materials required.
Conclusion
An asphalt driveway will cost you anywhere from $3,086 to $7,912, with an average cost of $4,996. Note that the price of any add-on services will increase your final bill.
About Us
LawnStarter is a startup making lawn care easy affordable and reliable. Follow this blog to stay tuned with what you need to keep your lawn in tip-top shape year-round.
How much does asphalt cost per ton?
It costs between $100 to $200 per ton. Cold mix asphalt costs $10 to $50 per bag, but it can be used only for temporary repairs. Cold mix shouldn’t be used for a whole driveway because it doesn’t last more than one or two seasons. Advertisement.
How much does recycled asphalt cost?
Recycled asphalt costs between $10 to $20 per ton, compared to $100 to $200 per ton for brand-new asphalt. Using recycled asphalt can save you $675 to $1,350 on driveway materials if it’s available in your area. Sometimes an installer can mill the old material onsite, cutting down on transporting supplies to your home.
How long does an asphalt driveway last?
Most asphalt driveways last up to 20 years. If your driveway is past its prime and showing its age, it’s time for a replacement. To completely resolve asphalt driveway issues, a replacement is the way to go.
How much does it cost to seal asphalt?
Asphalt sealing typically costs $3 to $7 per square foot. This top coat costs less because it’s a thin layer on top of an existing surface. Asphalt sealant costs about $500 and should be done at least 6 months after the top coat. It provides a layer of protection to avoid cracking and environmental damage. An asphalt driveway requires regular maintenance, and sealing is recommended every 3 to 5 years. Any cracks or fissures should be patched up and remedied immediately.
How many square feet does a ton of concrete cover?
One ton can cover about 40 to 80 square feet, and the total amount needed depends on the thickness of the layers. A driveway 2 inches thick can run 80 square feet per ton, and a 4-inch-thick driveway can run 40 square feet per ton. An average driveway will need 7.5 to 15 tons.
How much does a heated driveway cost?
A heated driveway usually costs $12 to $25 per square foot, depending on whether it’s new or a replacement. For the average home, the cost will be between $7,200 to $15,000.
How much does it cost to excavate a driveway?
Excavating land can cost between $1,500 to $5,100, depending on the number of cubic feet that needs to be moved. Grading, or leveling the area to make your driveway smooth and well-drained, costs between $5 and $10 per square foot for professional graders, but steep driveways may cost more.
How much does it cost to install asphalt 1?
Asphalt 1 – asphaltic concrete 3 is usually installed at a depth of no less than 2″. For this project, the asphalt 1 is at 2.5″ and would cost roughly $830 installed. This tends to have a lifespan of 10 to 30 years and will need treatment every six to ten years to maintain its good looks and durability.
How long does asphalt last?
Asphalt paving is widely used because it lasts longer than most types of pavements with a life span of over 20 to 25 years if laid properly. When it is fully replaced by scarification, the scientist has found a way of recycling this by-product of a petroleum refinery, asphalt is the commonest recycled material in the United States ...
What is the mix of asphalt and sand?
Most pavements consist of 5 to 10 % asphalt mixed with 90 to 95% aggregate and sand while macadam the active agent binds them together. Please note that to enhance the pavement surface performance, the temperature of the asphalt must be maintained to the barest minimum to retain its flexibility.
What is the constituent of asphalt?
A Constituent Of Asphalt Pavement. Asphalt pavement is consist of sand, the stone of different sizes, additives and liquid petroleum. Asphalt which is also known as bitumen has macadam which serves as a glue when paving. This is the active binder that makes all other constituent stick together.
What is the greatest strength of asphalt pavement?
Flexibility is the greatest strength of asphalt pavement, allowing the surface to adapt to varying surface changes caused by weather and soil movements. Asphalt pavement is build surface that it does not retain water on its surface.
How wide is a driveway?
Usually, 9 to 10 feet wide is enough for a car but if you have a lot of vehicular movement in your house. Then you have to consider a double lane. A driveway typically extends into a truck C road or a street curb into the garage in your home. The square footage is an important factor to consider when determining the cost of the pavement. The cost of renting special equipment make a driveway less than 10 feet costlier than other sizes.
How thick were Roman roads?
The thickness of these military roads was about 0.9mand with a width of 4.3 or less but it has been observed that some Roman roads have a thickness of 2.4m.
How much does it cost to recycle asphalt?
A recycled asphalt driveway costs $2 to $5 per square foot installed or from $0.15 to $0.40 per square foot for materials only. A ton of asphalt millings covers 60 square feet on average, while a cubic yard covers 80 square feet at 4" deep.
How much does it cost to deliver crushed asphalt?
Crushed asphalt delivery costs $30 to $100 per truckload (8 to 20 tons). Delivery increases the cost per ton and yard by 50%, depending on the quantity and distance. Some companies offer free delivery with a minimum purchase. Small amounts of millings are typically not eligible for delivery.
How much does recycled asphalt weigh?
Recycled asphalt weighs 90 to 120 pounds per cubic foot or between 1.2 and 1.6 tons per cubic yard, depending on the quality and mix composition. Asphalt millings typically weigh less than new hot-mix asphalt. Rain makes recycled asphalt millings heavier by raising its moisture content.
How long does it take for recycled asphalt to harden?
After steamroller compaction and sealing, the recycled asphalt millings take 24 to 48 hours to harden. First, the steamroller will compress and heat the millings that bind together to create a hardened level surface. Then pavers spread a sealant on top to stabilize the blacktop.
What is asphalt milling?
Asphalt millings are old recycled asphalt pieces crushed into a smaller gravel-size rock. Contractors compact and seal the crushed asphalt to create driveways, roads, parking spots, sidewalks, or blacktops. Asphalt-recycling facilities heat reclaimed millings to remove impurities and excess moisture.
How much asphalt do I need for a tennis court?
How much recycled asphalt do I need for a basketball or tennis court? Recycled asphalt for a 94x50-foot basketball court costs $700 to $1,800 and requires 70 to 90 tons of asphalt millings. A 78x36-foot tennis court requires 40 to 55 tons of recycled asphalt that costs $400 to $1,100 on average. Return to Top.
How much does asphalt milling cost?
Asphalt millings can and should be sealed to make pavement last longer. Asphalt sealing costs $0.20 to $0.70 per square foot, depending on the cleaning and prep work required. Hire a professional paver to choose the most-suitable asphalt millings sealer and application method.
How much does an asphalt driveway cost per square foot?
At $13 per square foot, curbs run more because of extra labor and a higher average thickness for the material. The width of the average residential lot is 75 to 125 feet. "Provided it's installed properly, including a stable base, and is well-maintained over time, an asphalt driveway should last twenty years or longer.".
How much does it cost to seal asphalt?
Stamped or colored asphalt costs $12 to $17 per square foot for the entire surface. If you only need the top coat, you’ll pay $5 to $10 per square foot. Asphalt in a unique shape or color adds interest to your property. In most cases, you’ll want to seal it to keep it in good condition for longer.
How much does it cost to pave a driveway?
Paving an asphalt driveway costs $4,746 on average, with a typical range between $2,935 and $6,567 . This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor. If you need replacement, you’ll pay $8 to $15 per square foot. Although driveways are the most common use of asphalt in the home, other applications include:
How much does asphalt overlay cost?
Asphalt Overlay Cost. Asphalt overlay costs $3 to $7 per square foot for standard materials. This project, often called a “top coat,” runs less because it involves a thinner layer on top of an existing surface. Asphalt sealant costs about $500, and should be done at least 6 months after the top coat.
How much does it cost to pave a 100 foot path?
Paving a 100-foot asphalt path costs $1,750 to $3,250. The average pathway is about 30 inches wide. Designs with complicated curves increase the total because they add to the square footage.
How much does reclaimed asphalt cost?
Recycled or Reclaimed Asphalt. Recycled or reclaimed asphalt costs $10 to $20 per ton, compared to $100 to $200 per ton for new. This can save you $675 to $1,350 on materials for a driveway, if it’s available in your area.
How many square feet does a ton of asphalt cover?
One ton usually covers 40 to 80 square feet. The amount you need depends on the thickness of the layers: 2 inches thick: 80 square feet per ton. 4 inches thick: 40 square feet per ton. For the average driveway, you’ll need 7.5 to 15 tons. "The complexity of the job itself weighs heavily on the price of an asphalt job.
Asphalt calculator formula
Based on the measurements you provide for required length, width and thickness, the calculator first works out the area and volume of the hot asphalt mix required using the below formulas:
Calculation examples
Imagine I want to pave over an area measuring 20 feet by 4 feet to a thickness of 6 inches using standard asphalt (140 lb/ft³) and costing $150 per US short ton.
What if my measurements are in different units?
The best thing about our asphalt calculator is that it takes care of this for you.
How much does it cost to install asphalt?
Asphalt paving material usually costs $40-80 a ton. One ton will cover 30 to 80 square feet. A residential driveway averages 9-24 square feet. Other materials are needed for asphalt driveway installation as well, and will affect the final cost.
How much does a paver driveway cost?
They offer a wide variety of designs, shapes, sizes, and colors. A paver driveway will cost between $13-15 per square foot. A poured concrete driveway ranges from $7-9 per sq ft.
What is the most expensive option to have a driveway removed?
Repaving. Repaving your driveway requires removing the old driveway completely. This is the most expensive option, because you will be paying to have the old driveway removed and a new driveway installed. This is of course the most expensive option, but a paved driveway has a lifespan.
What is resurfacing a driveway?
Resurfacing is the middle ground of driveway repair. It’s also known as asphalt overlay. In many cases, this can repair significant asphalt cracks. Existing asphalt is covered with a new layer of asphalt, in a process similar to the original driveway.
Why does asphalt crack?
Over time, the heat from the sun’s rays will begin to break down the materials in the asphalt and remove moisture. As the asphalt weakens due to the sun, cracks begin to form.
How long can you drive on a driveway after it's installed?
You won’t be able to drive on our driveway for 3-5 days after it’s installed. You’ll need to avoid parking on the driveway for the first 14 days, particularly in the hot part of the day.
What is the cheapest driveway?
A gravel driveway is the cheapest option if you need a new driveway, at $1-3 per sq ft. It matches with any style of home. Classic gray gravel is well suited to a winding country drive. White gravel provides a modern look.