Full Answer
What is the price per square foot for asphalt?
The cost of asphalt ranges from $3 to $5 per square foot, including labor. [2] It is easier to get a better idea of the total cost when you calculate it in tonnes, however, and that is how these calculations will be carried out. The average price of good quality asphalt is $85 to $150 per ton. Asphalt pricing fluctuates with the price of oil.
What is the current price of asphalt?
Asphalt prices. Asphalt prices are $40 to $80 per ton on average or $0.75 to $2.00 per square foot.Asphalt materials for a 2-car (24’x24’) driveway cost $600 to $1,100.Asphalt prices depend on the quality, volume, delivery fees, and if it's hot-mix, cold-mix, porous, recycled, or crushed.
What is the average cost of asphalt?
The simple fact of the matter is that professional Wormleysburg asphalt contractors are more likely to deliver high-quality results. They have access to the heavy equipment and materials needed to perform good quality work. Equipment rental costs and ...
How much does it cost to pave a driveway?
‘Before you can pave your new driveway, you’ll have to get the land ready, which usually costs between $5 and $8 per square foot,’ says Bailey. ‘This step includes evening out the land to help prevent serious problems from happening down the road.’
How much is asphalt per square foot San Francisco?
Asphalt driveway cost in San Francisco, California ranges from $5 to $8 per square foot (3 to 4-inch thick asphalt). Asphalt driveway cost ranges from $4,600 to $8,100 for a 24-ft x 40-ft driveway (2 car). To get a more accurate cost for your asphalt driveway project, request a quote.
How many square feet are in a ton of asphalt?
One ton of asphalt covers 30 to 80 square feet. A 2-car driveway needs 7.5 to 18 tons of asphalt, depending on the thickness.
How do you calculate asphalt cost?
Asphalt is usually priced by square foot. The cost per ton is $40 to $80 and per square foot is $0.75 to $2.00. The cost is determined by the size of rock in the asphalt, volume ordered, delivery cost, and the location of the work being performed.
How much does it cost to pave 900 square feet?
Asphalt paving costs $3 to $7 per square foot on average. Asphalt materials and installation labor costs $2 to $4 per square foot, plus basic excavating and installing a gravel subgrade costs $1 to $3 per square foot. Adding colors, patterns, curbs, or sidewalks cost extra.
How do you convert tons to SF?
Manual CalculatorMultiply the length of the area by the width of the area = Square Feet.Multiply Square Feet by the Depth* = Cubic Feet.Divide Cubic Feet by 27 = Cubic Yards.Multiply Cubic Yards by 1.5 = Tons Needed.
How do you calculate tons of asphalt?
How to Calculate Asphalt Tonnage – 5 Simple StepsStep 1: Measure your pathway.Step 2: Convert the measurements to feet.Step 3: Multiply the measurements to cubic feet.Step 4: Multiply the weight density of asphalt with the volume figure.Step 5: Covert the amount to tons.
How thick should a asphalt driveway be?
2 to 3 inchesResidential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate.
How do you quote an asphalt driveway?
Amount of asphalt: consider the length, depth, and width of your driveway. Then ask your contractor to check and provide you a quote. Transportation costs: the farther your house is located, the more you are likely to pay more costs. This will also affect the type of asphalt you will use such as warm or hot mixes.
What is the asphalt price index?
2022 State IndexesStateJanFebCalifornia$404.70$460.70Colorado$436.23$526.01Connecticut$512.50$522.50Delaware$545.00$566.6742 more rows
Is concrete cheaper than asphalt?
Because the substance used to create asphalt is less expensive than cement, asphalt driveways are usually 30% to 45% less expensive than concrete. Curing Time - Asphalt driveways can be completed faster than concrete driveways, which is the reason it is used almost exclusively for road construction.
Is asphalt the same as blacktop?
Blacktop is heated to approximately 150 degrees celsius, whereas asphalt is only heated to 120 degrees celsius. Asphalt is has a higher bitumen content and for that reason is less porous and more resilient to wear and tear from high traffic and thus is the preferred choice for major highways.
Is concrete driveway better than asphalt?
Overall, asphalt is less durable than concrete. With proper maintenance, it can last 30 years. Alternatively, concrete provides a sturdy, long-lasting option and can last homeowners 50+ years with occasional repairs and degreasing.
How much does it cost to install asphalt 1?
Asphalt 1 – asphaltic concrete 3 is usually installed at a depth of no less than 2″. For this project, the asphalt 1 is at 2.5″ and would cost roughly $830 installed. This tends to have a lifespan of 10 to 30 years and will need treatment every six to ten years to maintain its good looks and durability.
How long does asphalt last?
Asphalt paving is widely used because it lasts longer than most types of pavements with a life span of over 20 to 25 years if laid properly. When it is fully replaced by scarification, the scientist has found a way of recycling this by-product of a petroleum refinery, asphalt is the commonest recycled material in the United States ...
What is the mix of asphalt and sand?
Most pavements consist of 5 to 10 % asphalt mixed with 90 to 95% aggregate and sand while macadam the active agent binds them together. Please note that to enhance the pavement surface performance, the temperature of the asphalt must be maintained to the barest minimum to retain its flexibility.
What is the constituent of asphalt?
A Constituent Of Asphalt Pavement. Asphalt pavement is consist of sand, the stone of different sizes, additives and liquid petroleum. Asphalt which is also known as bitumen has macadam which serves as a glue when paving. This is the active binder that makes all other constituent stick together.
What is the greatest strength of asphalt pavement?
Flexibility is the greatest strength of asphalt pavement, allowing the surface to adapt to varying surface changes caused by weather and soil movements. Asphalt pavement is build surface that it does not retain water on its surface.
How wide is a driveway?
Usually, 9 to 10 feet wide is enough for a car but if you have a lot of vehicular movement in your house. Then you have to consider a double lane. A driveway typically extends into a truck C road or a street curb into the garage in your home. The square footage is an important factor to consider when determining the cost of the pavement. The cost of renting special equipment make a driveway less than 10 feet costlier than other sizes.
How thick were Roman roads?
The thickness of these military roads was about 0.9mand with a width of 4.3 or less but it has been observed that some Roman roads have a thickness of 2.4m.
Asphalt calculator formula
Based on the measurements you provide for required length, width and thickness, the calculator first works out the area and volume of the hot asphalt mix required using the below formulas:
Calculation examples
Imagine I want to pave over an area measuring 20 feet by 4 feet to a thickness of 6 inches using standard asphalt (140 lb/ft³) and costing $150 per US short ton.
What if my measurements are in different units?
The best thing about our asphalt calculator is that it takes care of this for you.
What is aggregate in pavement?
It consists of two types of material (either one can be used depending on the different benefits they will provide to the pavement)l: Aggregate- a recycled material, the aggregate is a composite of gravel and sand. Once the ground is leveled, the aggregate is poured over it to stabilize the surface.
What is the surface layer?
The surface layer is the top layer which is exposed to traffic and weather. Due to its constant use and exposure, the surface is the most susceptible to damage. When engineers are installing this layer, they know it needs to be the strongest of the three. The material they use is a varied mixed of HMA.
How much does stamped asphalt cost?
Colored or stamped asphalt costs $5 to $15 per square foot for a new driveway or replacement, or $3 to $8 per square foot for resurfacing the top layer. A 20x20 stamped asphalt driveway costs $2,400 to $6,000. Decorative patterns are sealcoated, which colors and protects the surface.
How long does asphalt last?
An asphalt driveway lasts 15 to 30 years and requires sealcoating every 3 to 5 years. Boosts curb appeal and resale value. A new asphalt driveway needs an asphalt layer 3" to 5" thick to last. Resurfacing only the top layer or asphalt overlay costs $1 to $3 per square foot.
How thick should a driveway be?
A new residential driveway needs 3 to 5 inches of asphalt over 4 to 8 inches of rock-base foundation to withstand temperature changes and last 20+ years. Some companies recommend a 2" thickness to save $0.50 to $1 per square foot, but won't provide a warranty due to deterioration risks.
How much does it cost to repave an asphalt driveway?
The average cost to repave an asphalt driveway is $4 to $10 per square foot with a new gravel base or $3 to $7 per square foot with an existing base. Repaving a 2-car (20’x20’) asphalt driveway costs $1,600 to $4,000 on average. Repaving includes removing and hauling away the existing asphalt.
How much does it cost to lay asphalt over concrete?
Laying new asphalt over a concrete driveway costs $1 to $3 per square foot. Contractors fill cracks with concrete-repair caulk before paving. Resurfacing concrete with asphalt is cheaper than replacing concrete. However, special preparation is required to stabilize the concrete and prevent cracks.
How much does it cost to pave a road?
Cost to pave an asphalt road. The average cost to pave a private one-lane asphalt road is $35 to $85 per linear foot. Paving a two-lane (24'-wide) asphalt road costs $70 to $170 per linear foot or $370,000 to $900,000 per mile. Blacktop road construction costs more than driveways because roads need 5" to 11" thick asphalt.
How much does it cost to install asphalt curbs?
Asphalt curbing costs $3 to $6 per linear foot to install. Adding asphalt curbing to a 400-square-foot driveway costs $120 to $240. Repairing or replacing asphalt curbs costs $8 to $15 per linear foot on average. Total costs depend on curb thickness, styles, and labor.
How long does asphalt last?
You will need another tarmac calculator if the density differs significantly in your case. Most asphalt, hot mix asphalt included, has a lifespan of over 20 years if applied and maintained appropriately, and if it is not subject to significantly higher loads than it was planned for.
What is asphalt used for?
Asphalt is used for bituminous waterproofing products, where it is a part of roofing felt and is used for sealing flat roofs.
What can be added to hot mix asphalt?
Recycled polymers (e.g., rubber tyres) may be added to the hot mix asphalt to modify its properties depending on the intended ultimate application. Asphalt is usually sold by the tonne from companies specializing in construction, usually road construction and roof water-proofing.
What is bitumen used for?
Bitumen has other great qualities as well: durability, high traction, low light reflectivity, etc. When used for road construction it usually serves as a binding agent in the production of as phalt concrete. Bitumen is mixed with fine and coarse aggregates, e.g. sand, gravel, and crushed rock.
What is the best mix for driveways?
Driveway Mix Asphalt. Cheaper mix that is tailored to use in driveways and parking lots. It includes crushed stone, sand and gravel. Porous Asphalt. It is designed only with crushed stone and a few grains of sand in the mix, making it permeable to water. More expensive, but removes the need for drainage.
How much is a ton?
The ton is currently only used in the United States and is equal to 2000 pounds (2000 lbs).
Is asphalt a liquid?
Asphalt is a black, very sticky, and highly viscous liquid, or sometimes semi-solid, form of petroleum. It can be found in natural deposits, but is more often the result of refinement, and is classed as a pitch. Asphalt is highly recyclable, providing cost savings and environmental benefits.
How many square feet does 1 ton of asphalt cover?
The area that 1 ton of asphalt covers depends on the thickness of the asphalt to be used; for a half-inch thick section of asphalt, 1 ton will cover approximately 316 square feet, while 1 ton of asphalt will cover 79 square feet when laid several inches thick. Click to see full answer. Then, how thick should an asphalt driveway be?
How thick should I put asphalt on my driveway?
In many cases a 4-inch thickness may be adequate, but 5 or even 6 inches of full-depth asphalt will assure you of a stronger, stable driveway under a wider range of climate and loads. As an option, some contractors use 6 to 8 inches of compacted aggregate, or gravel, as a base for 3 inches of asphalt pavement.
How Much Does an Asphalt Driveway Cost?
The average cost for an asphalt driveway is $4,996, but that will vary depending on several factors, including the size of your driveway, how deep of a layer of asphalt you want for your driveway, and even the type of asphalt.
Cost Estimator by Driveway Size
The size of your driveway is the biggest factor in determining the cost of your asphalt driveway. Expect to be charged at least $3,258 for an average-sized driveway at an average price. Sometimes the costs of labor will be added, sometimes they are included. Here we’ll break down the costs by square foot, ton, and labor hours.
Other Factors Affecting Cost
Your final bill for your asphalt driveway is going to depend on a lot of factors, including the depth of your asphalt layer, any decorative (stamped asphalt) or extraordinary (heated driveway) features, and the cost of substrate.
Services Often Bundled With Asphalt Driveways
Other outdoor services are often bundled with the installation of an asphalt driveway. Most of these additional services (tree removal or land grading, for example) involve preparing the land for your driveway.
Costs of a DIY Asphalt Driveway
You may be tempted to install your own asphalt driveway. Resist the temptation. This is going to be an enormous project. But if you think you’d like to DIY your asphalt driveway, we’ll outline the pros and cons as well as costs and materials required.
Conclusion
An asphalt driveway will cost you anywhere from $3,086 to $7,912, with an average cost of $4,996. Note that the price of any add-on services will increase your final bill.
About Us
LawnStarter is a startup making lawn care easy affordable and reliable. Follow this blog to stay tuned with what you need to keep your lawn in tip-top shape year-round.
How to calculate how many tons of asphalt needed?
First, you need to obtain the square measurement using a tape measure. Second, you determine the dimension of the yard in cubic meters and multiply by the depth. Third, you get the volume of the yard and multiply by the density and then change ...
Why do you need to calculate the amount of asphalt needed for a project?
When you are undertaking any project, you need to calculate the required amount of materials required so that you save on unnecessary costs and save on more transport costs of bringing more additional materials. When you are undertaking an asphalt pavement project, proper calculations will ensure you apply the right ton of asphalt.
How much does a yard of asphalt weigh?
1 cubic yard of hot asphalt mix weighs 2.025 tons or 4050 lbs. These measurements are an approximation and therefore when you are ordering the quantity ensure that you add more asphalt to gather for the waste and you don’t run short as you do your pavement project.
Why is asphalt used in roads?
Most roads in the United States are using asphalt because it is durable and long-lasting. It is easy to maintain with small repairs and it withstands unfavorable weather such as extreme winter. It is black and therefore ice melts easily.
Why is it important to calculate the area of asphalt?
Proper calculation of the area especially in irregular shapes is important because you will be able to get the right amount and density of asphalt. If you want to undertake a good quality project then you must calculate the right proportion of asphalt so that the project is completed on time and you use the right mixture of ingredients.
Is asphalt a good material?
Asphalt is safe because it is obtained from natural products and therefore there is less emission of fossil fuel which is harmful. Proper calculations of area and multiplying it with the unit weight of asphalt are important because you will be able to get the right viscosity or density for your projects.
Table of Contents
EPDM rubber, clay tiles, asphalt shingles, modified bitumen, asphalt BUR, PVC, copper panels, roofing slates, and cedar shingles.
About Our Roof Weight Chart
The following table provides typical weights (dead load, self-weight) for various roofing materials and related building products.
Weight of Roof Systems
Note that roof systems typically include more than one type of material.
Check with the Roofing Manufacturer
Manufacturer technical data sheets (with the material weights) are almost always made available on the manufacturer’s website.
Table of Roofing Material Weights
Note: These are installed weights. Shingles, tiles, and panels overlap; the weights for these materials will be higher per square foot than for the uninstalled weights of the same materials.