Asphalt driveway paving cost
| Size | Square feet | Average cost |
| 10’x20’ Driveway (1-car) | 200 | $600 – $1,400 |
| 12’x24’ Driveway (1-car) | 288 | $850 – $2,000 |
| 20’x20’ Driveway (2-car) | 400 | $1,200 – $2,800 |
| 24’x24’ Driveway (2-car) | 576 | $1,700 – $4,000 |
How much does asphalt paving equipment cost?
Asphalt paving is a prime candidate for this process and costs around $100 to $190. Sealing an asphalt driveway keeps it looking fresh despite the harsh rays of the sun. Asphalt paving in hotter climates may require sealing each year, but every 3 to 5 years is also recommended.
How much does a parking lot cost of asphalt paving?
Your contractor may charge more or less depending on how in-depth the paving project is. Square Footage. Of course, the ultimate factor in cost determination is the paving project’s square footage. Generally speaking, paving an asphalt parking lot should cost anywhere from $2-$5 per square foot.
How much will it cost to resurface my asphalt pavement?
How much will it cost to resurface my asphalt pavement? Cost to Resurface Asphalt Driveways Resurfacing costs approximately $2.25 per square foot. Patterns and colors cost more—around $4 to $8 per square foot.
Why is asphalt paving better than cement?
Asphalt Is More Economical Than Concrete Paving. Because asphalt paving has the capacity to withstand more temperature changes and harsh weather conditions than concrete, it’s also far more economical. Asphalt’s ability to sustain fewer damages in the face of harsh weather conditions also means it’s low maintenance and requires fewer repairs.
See more
Which is cheaper a concrete or an asphalt driveway?
The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.
How do you calculate the cost of an asphalt driveway?
For the simplest estimate, you can use this formula.Length x width=Square footage of the driveway.Driveway sq ft x $3= low end cost.Driveway sq ft x 7= high end cost.Driveway sq ft x $2= low end cost.Driveway sq ft x $4= high end cost.When to reseal your driveway:When to repave your driveway:
What is the cheapest surface for a driveway?
A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway's sub-base is sound.
Are pavers cheaper than asphalt?
Summary: Paver Driveway vs Asphalt Driveway Asphalt is cheaper than pavers in up-front installation costs. Pavers are lower maintenance and generally have a longer lifespan. You have more design and visual variety options with pavers.
How much is a 700 ft driveway?
For a larger driveway or thicker base, the cost will be higher. For example, a driveway 15 feet wide by 700 feet long with a six inch base will need approximately 25 tons of gravel, at a material cost of about $700. With delivery, the total cost will be around $1000.
How thick should a asphalt driveway be?
2 to 3 inchesResidential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate.
How can I save money on my driveway?
One of the best ways to save money is to use loose materials such as gravel, stone, or tar-and-chip (macadam) for your driveway surface.
What is the least expensive way to pave a driveway?
gravelOf the four paving materials described in this guide, aggregate (gravel) is the least expensive, followed by asphalt, concrete, and paving stones. If you're installing your driveway on a shoestring budget, gravel is your best choice. If you have more wiggle room, you'll have more choice.
What is the best maintenance free driveway?
Low-Maintenance Driveway OptionsPaving Stones. Paving stones are known to last up to a full century if properly laid. ... Concrete Grass Pavers. An interlocking concrete grass paver driveway made may be an option for your driveway. ... Plastic Permeable Pavers.
How much is a 20x20 paver patio?
A 20x20 brick paver patio costs $3,800 to $6,800. The average cost of pavers and base materials is $4 to $6 per square foot, while labor runs $6 to $11 per square foot. Get free estimates from masonry contractors near you or view our cost guide below. How much will your paver patio cost?
Can I put asphalt over a concrete driveway?
If the question is "CAN I lay asphalt over concrete?" then the answer is "Yes." This is absolutely possible if elevations allow for it, and we're happy to lay asphalt driveways over concrete if that's what you want. It's also the cheaper option since heavy equipment is required to dig up an existing concrete slab.
Do driveway pavers increase home value?
While there are no hard numbers on it, this suggests that a paver driveway would be a good option to increase the value of your home. Like other exterior changes, adding pavers can make a dramatic impact on the curb appeal of your property, which can improve its value and shorten the time that it is on the market.
How much does asphalt cost per ton?
Asphalt cost per ton. Asphalt costs $40 to $80 per ton on average. Asphalt prices vary depending on the mix and material ingredients. One ton of asphalt covers 30 to 80 square feet. A 2-car driveway needs 7.5 to 18 tons of asphalt, depending on the thickness. Asphalt cost per ton by material - chart.
How much does it cost to haul asphalt?
A bulk truckload of asphalt costs $500 to $1,800, including delivery fees. Tandem trucks carry 13 to 20 tons of asphalt that cover 550 to 850 square feet with a layer 3 to 5 inches thick. Prices vary according to the asphalt-delivery distance.
How much does it cost to rent an asphalt paving machine?
Renting an asphalt paving machine costs $750 to $3,600 per day on average. Asphalt roller rental costs $120 to $700 per day for ride-on compactors 3 to 4-foot wide. Renting asphalt paving machinery sometimes requires a commercial driver’s license and additional training.
How much does a 50 lb bag of asphalt cost?
A 50 lb. bag of cold-patch asphalt costs $8 to $20 and covers 5 to 7 square feet at a 1" depth. Cold-patch asphalt is the only DIY-friendly option that cures by compaction alone.
How many tons of asphalt is in a cubic yard?
There are typically 2 tons in 1 cubic yard, depending on the mixture's density. A cubic yard covers 65 to 110 square feet with an asphalt layer 3 to 5 inches deep.
What is the difference between asphalt and blacktop?
The terms “asphalt” and “blacktop” are slightly different. Highway pavers use asphalt, which contains less stone than real blacktop. Blacktops are used for residential areas with less traffic, are easier to repair, and more durable than asphalt.
How much does an asphalt driveway cost per square foot?
At $13 per square foot, curbs run more because of extra labor and a higher average thickness for the material. The width of the average residential lot is 75 to 125 feet. "Provided it's installed properly, including a stable base, and is well-maintained over time, an asphalt driveway should last twenty years or longer.".
How much does it cost to seal asphalt?
Stamped or colored asphalt costs $12 to $17 per square foot for the entire surface. If you only need the top coat, you’ll pay $5 to $10 per square foot. Asphalt in a unique shape or color adds interest to your property. In most cases, you’ll want to seal it to keep it in good condition for longer.
How much does it cost to pave a driveway?
Paving an asphalt driveway costs $4,746 on average, with a typical range between $2,935 and $6,567 . This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor. If you need replacement, you’ll pay $8 to $15 per square foot. Although driveways are the most common use of asphalt in the home, other applications include:
How much does asphalt overlay cost?
Asphalt Overlay Cost. Asphalt overlay costs $3 to $7 per square foot for standard materials. This project, often called a “top coat,” runs less because it involves a thinner layer on top of an existing surface. Asphalt sealant costs about $500, and should be done at least 6 months after the top coat.
How much does it cost to pave a 100 foot path?
Paving a 100-foot asphalt path costs $1,750 to $3,250. The average pathway is about 30 inches wide. Designs with complicated curves increase the total because they add to the square footage.
How much does reclaimed asphalt cost?
Recycled or Reclaimed Asphalt. Recycled or reclaimed asphalt costs $10 to $20 per ton, compared to $100 to $200 per ton for new. This can save you $675 to $1,350 on materials for a driveway, if it’s available in your area.
How many square feet does a ton of asphalt cover?
One ton usually covers 40 to 80 square feet. The amount you need depends on the thickness of the layers: 2 inches thick: 80 square feet per ton. 4 inches thick: 40 square feet per ton. For the average driveway, you’ll need 7.5 to 15 tons. "The complexity of the job itself weighs heavily on the price of an asphalt job.
How much does asphalt paving cost?
The Cost. Asphalt paving is affordable, and you can typically expect to pay around $3-$4 per square foot. Contrast his with around $6 per square foot for concrete, and you can see that asphalt paving is by far the more affordable option. Often, large projects will receive a discounted price, saving you money.
How much does it cost to paved a driveway?
For instance, an average-sized driveway generally can be paved for around $4,000-$6,000, whereas a parking lot project would likely cost much more. However, large projects can include deals for other labor such as ripping out pre-existing asphalt or concrete and hauling it away.
What is asphalt contractor?
Asphalt contractors utilize heavy machinery and transporting that from one location to another isn’t as simple as running to the store. Preparation and costs must be considered and often the client will be charged at least part of the cost of transportation. So always try to find a paving company near you.
Can I dump asphalt?
Contractors can’t just dump asphalt wherever you want. They need to excavate the area. Removing obstacles and leveling the ground will help the asphalt sit evenly, causing it to last longer and remain solid over the years.
How much does it cost to repair asphalt pavement?
Repairing or repaving asphalt pavement doesn’t cost as much as a total installation. These projects can cost anywhere between $20 to $6,500 or more . To put it into a clearer perspective, the service costs for asphalt pavement on a repaving project cost about $1.75 to $2.25 per square foot.
What factors affect the cost of asphalt pavement?
Here are a few of the factors that can impact the cost of asphalt pavement installation: Excavation. As mentioned before, the asphalt paving contractor will need to excavate and clear the area before laying down the road.
Why is asphalt pavement used?
One of the main reasons its used more frequently is that it is more cost-effective than other surface types. Asphalt pavement is also eco-friendly, safe, and tolerates a range of temperatures and weather conditions.
How long does asphalt last?
In fact, asphalt pavement surfaces that are properly maintained can last over 20 years. So, even if a repair, patch, or repaving service seems costly upfront, it could extend the life of your roadway.
What factors affect the price of asphalt?
A few other factors that impact the price of asphalt pavement may include the environment, permit requirements, construction activity, and current oil prices.
Do you need a base coat for asphalt?
Along with the actual asphalt mixture, there are other materials required to complete any asphalt pavement project. The cost of these materials will also play a role in the final price. Every project also needs a base coat. The costs of the base coat vary depending on the quality and time spent applying the material.
Does Morgan Pavement offer maintenance?
One product does not solve every issue, which is why Morgan Pavement offers a wide variety of asphalt maintenance products and services. These offerings will help protect and extend the life of your asphalt surfaces at a cheaper cost than a completely new installation.
How much does it cost to install asphalt 1?
Asphalt 1 – asphaltic concrete 3 is usually installed at a depth of no less than 2″. For this project, the asphalt 1 is at 2.5″ and would cost roughly $830 installed. This tends to have a lifespan of 10 to 30 years and will need treatment every six to ten years to maintain its good looks and durability.
How long does asphalt last?
Asphalt paving is widely used because it lasts longer than most types of pavements with a life span of over 20 to 25 years if laid properly. When it is fully replaced by scarification, the scientist has found a way of recycling this by-product of a petroleum refinery, asphalt is the commonest recycled material in the United States ...
What is the mix of asphalt and sand?
Most pavements consist of 5 to 10 % asphalt mixed with 90 to 95% aggregate and sand while macadam the active agent binds them together. Please note that to enhance the pavement surface performance, the temperature of the asphalt must be maintained to the barest minimum to retain its flexibility.
What is the constituent of asphalt?
A Constituent Of Asphalt Pavement. Asphalt pavement is consist of sand, the stone of different sizes, additives and liquid petroleum. Asphalt which is also known as bitumen has macadam which serves as a glue when paving. This is the active binder that makes all other constituent stick together.
What is the greatest strength of asphalt pavement?
Flexibility is the greatest strength of asphalt pavement, allowing the surface to adapt to varying surface changes caused by weather and soil movements. Asphalt pavement is build surface that it does not retain water on its surface.
How wide is a driveway?
Usually, 9 to 10 feet wide is enough for a car but if you have a lot of vehicular movement in your house. Then you have to consider a double lane. A driveway typically extends into a truck C road or a street curb into the garage in your home. The square footage is an important factor to consider when determining the cost of the pavement. The cost of renting special equipment make a driveway less than 10 feet costlier than other sizes.
How thick were Roman roads?
The thickness of these military roads was about 0.9mand with a width of 4.3 or less but it has been observed that some Roman roads have a thickness of 2.4m.
How much does asphalt cost per ton?
It costs between $100 to $200 per ton. Cold mix asphalt costs $10 to $50 per bag, but it can be used only for temporary repairs. Cold mix shouldn’t be used for a whole driveway because it doesn’t last more than one or two seasons. Advertisement.
How much does recycled asphalt cost?
Recycled asphalt costs between $10 to $20 per ton, compared to $100 to $200 per ton for brand-new asphalt. Using recycled asphalt can save you $675 to $1,350 on driveway materials if it’s available in your area. Sometimes an installer can mill the old material onsite, cutting down on transporting supplies to your home.
How long does an asphalt driveway last?
Most asphalt driveways last up to 20 years. If your driveway is past its prime and showing its age, it’s time for a replacement. To completely resolve asphalt driveway issues, a replacement is the way to go.
How much does it cost to seal asphalt?
Asphalt sealing typically costs $3 to $7 per square foot. This top coat costs less because it’s a thin layer on top of an existing surface. Asphalt sealant costs about $500 and should be done at least 6 months after the top coat. It provides a layer of protection to avoid cracking and environmental damage. An asphalt driveway requires regular maintenance, and sealing is recommended every 3 to 5 years. Any cracks or fissures should be patched up and remedied immediately.
How many square feet does a ton of concrete cover?
One ton can cover about 40 to 80 square feet, and the total amount needed depends on the thickness of the layers. A driveway 2 inches thick can run 80 square feet per ton, and a 4-inch-thick driveway can run 40 square feet per ton. An average driveway will need 7.5 to 15 tons.
How much does a heated driveway cost?
A heated driveway usually costs $12 to $25 per square foot, depending on whether it’s new or a replacement. For the average home, the cost will be between $7,200 to $15,000.
How much does it cost to excavate a driveway?
Excavating land can cost between $1,500 to $5,100, depending on the number of cubic feet that needs to be moved. Grading, or leveling the area to make your driveway smooth and well-drained, costs between $5 and $10 per square foot for professional graders, but steep driveways may cost more.
How much does asphalt cost?
It costs $8.50 per square foot — $2040 for a single-car driveway and $3553 for a two-car sized drive — and is available in colors on the black-gray spectrum. The cost of materials plus labor averages $3500—$4100.
How much does it cost to pave a driveway?
Nationwide, paving a driveway costs between $2700 and $6500. Depending on the size of your driveway and choice of materials, you could pay as little as $1200 to $12,000 or more. The average homeowner spends $4000.
How long does a gravel driveway last?
With care, a gravel driveway can last 50 years or more before it needs a major overhaul. Gravel does have drawbacks. It’s not as hard or even as asphalt or concretion and can be a tripping hazard. It’s prone to ruts, and in cold climates, snow removal takes some of the gravel with it.
Why is my concrete driveway heaving?
The small spaces between each allow moisture to drain underneath, but in cold climates, the build-up of water and ice can cause heaving. Pros recommend using thicker, heavier slabs to keep the driveway stable. Drawbacks to concrete driveways include staining — a problem that regular cleaning solves — and cracking.
How much does it cost to repair a blacktop driveway?
Over the 15–20 year life of a blacktop driveway, repairs and maintenance cost $800–$1000. Compared to gravel, however, asphalt is solid to walk on in any footwear, including high heels. Commercial blends may be coarse or smooth. Ultra-smooth surfaces are easier to repair and maintain, but rough finishes offer traction.
Why do people put paved driveways on their homes?
A paved driveway makes your property more functional and attractive. It adds to its resale value and inspires pride. Whether you are planning to sell your home or intend to live in it for a lifetime, nothing says “welcome home” like a professionally paved driveway.
How much does concrete cost per square foot?
Concrete driveways costs slightly more than asphalt per square foot — $9.00 versus $8.50 — but it’s a favorite because it’s durable, attractive and relatively low-maintenance. Estimates for labor and materials average $3900–$6000 for a 240-square foot area.
How much does it cost to install asphalt?
Asphalt paving material usually costs $40-80 a ton. One ton will cover 30 to 80 square feet. A residential driveway averages 9-24 square feet. Other materials are needed for asphalt driveway installation as well, and will affect the final cost.
How much does a paver driveway cost?
They offer a wide variety of designs, shapes, sizes, and colors. A paver driveway will cost between $13-15 per square foot. A poured concrete driveway ranges from $7-9 per sq ft.
What is the most expensive option to have a driveway removed?
Repaving. Repaving your driveway requires removing the old driveway completely. This is the most expensive option, because you will be paying to have the old driveway removed and a new driveway installed. This is of course the most expensive option, but a paved driveway has a lifespan.
What is resurfacing a driveway?
Resurfacing is the middle ground of driveway repair. It’s also known as asphalt overlay. In many cases, this can repair significant asphalt cracks. Existing asphalt is covered with a new layer of asphalt, in a process similar to the original driveway.
Why does asphalt crack?
Over time, the heat from the sun’s rays will begin to break down the materials in the asphalt and remove moisture. As the asphalt weakens due to the sun, cracks begin to form.
How long can you drive on a driveway after it's installed?
You won’t be able to drive on our driveway for 3-5 days after it’s installed. You’ll need to avoid parking on the driveway for the first 14 days, particularly in the hot part of the day.
What is the cheapest driveway?
A gravel driveway is the cheapest option if you need a new driveway, at $1-3 per sq ft. It matches with any style of home. Classic gray gravel is well suited to a winding country drive. White gravel provides a modern look.
Compare Quotes From Top-rated Local Flooring Contractors
The average costs to pave a driveway range between $3 and $15 per square foot. The cost depends on materials, size of the driveway and installation requirements. Expensive materials can cost as much as $30 per square foot while cheaper materials are as low as $1 per square foot.
Driveway Cost Per Square Foot
The cost of driveway installations is typically determined by the driveway site’s square footage. While the material itself and the installation cost affect the price per square foot, the square footage of a driveway will sum the total cost of the project.
Driveway Cost By Material Type
Depending on the material, paving a driveway can cost anywhere from $1,500 to over $11,000. Concrete is a popular choice because of its durability and long-lasting nature. Other popular types of driveways include asphalt or blacktop, gravel, pavers and rubber.
Driveway Installation Cost
The total cost of driveway installation depends on the size of the driveway, site conditions and the material used. Labor can make up about half of the total price per square foot while the price for new material can make up the other half. Thickness can affect material cost, especially for concrete and asphalt.
Frequently Asked Questions
Gravel is the least costly material to pave a driveway. The price ranges from $1 to $3 per square foot. The average total cost is usually around $1,200, though this number may not account for the fact that gravel is usually used to pave much larger driveways as a cost-reduction solution.