asphalt patio cost

Asphalt patio cost. Paving a 10’x15’ asphalt patio costs $450 to $1,050, while paving a 20’x20’ patio costs $1,200 to $2,800 installed with a gravel base. Patios require a compacted gravel foundation for stability. These fees do not include extra charges for rounded shapes, stamped brick patterns, and special colors.

Full Answer

How much does it cost to build a patio?

Going from there you can assess your desires and budget accordingly. According to HomeAdvisor.com the national average for a patio installation is $3,160. However, this can vary depending on your location. Of their 15,484 homes surveys, the low-end patios were built for less than $800 while the high end topped off at $9,800.

What is the average cost of a stone patio?

You’ve been thinking about it for some time and you’ve finally decided to take the plunge — you’re going to build a patio or deck this summer. Luckily, the official start to the season isn’t until June 20, but if you want to have a space to ...

How much does it cost to replace asphalt?

With a narrower average midpoint price range, you can expect to pay about $4.50 per sq. ft. or $450 per square to replace an asphalt shingle roof on a typical single-family house up to two-stories high.

How much does it cost to stain a concrete patio?

• Sub base – additives and aggregate can be pumped beneath the slab to fill sinking spots and prop the concrete back up.
• Cracks – A concrete overlay costs $3 to $7 per square foot to scrape the surface and apply a new concrete layer.
• Individual cracks can be filled for about $300

More items...

Is it cheaper to pour concrete or asphalt?

Cost. The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.

Is blacktop cheaper than pavers?

Summary: Paver Driveway vs Asphalt Driveway Asphalt is cheaper than pavers in up-front installation costs. Pavers are lower maintenance and generally have a longer lifespan. You have more design and visual variety options with pavers.

How much does it cost to pave 900 square feet?

Asphalt paving costs $3 to $7 per square foot on average. Asphalt materials and installation labor costs $2 to $4 per square foot, plus basic excavating and installing a gravel subgrade costs $1 to $3 per square foot. Adding colors, patterns, curbs, or sidewalks cost extra.

Can you put asphalt over concrete?

If the question is "CAN I lay asphalt over concrete?" then the answer is "Yes." This is absolutely possible if elevations allow for it, and we're happy to lay asphalt driveways over concrete if that's what you want. It's also the cheaper option since heavy equipment is required to dig up an existing concrete slab.

How much is a 20x20 paver patio?

A 20x20 brick paver patio costs $3,800 to $6,800. The average cost of pavers and base materials is $4 to $6 per square foot, while labor runs $6 to $11 per square foot. Get free estimates from masonry contractors near you or view our cost guide below. How much will your paver patio cost?

Is asphalt the same as blacktop?

Blacktop is heated to approximately 150 degrees celsius, whereas asphalt is only heated to 120 degrees celsius. Asphalt is has a higher bitumen content and for that reason is less porous and more resilient to wear and tear from high traffic and thus is the preferred choice for major highways.

Why is asphalt so expensive?

Unfortunately, thanks to the unstable economy, sulphur fuel regulations, trade restrictions and the promise of more tariffs, construction industry experts predict the cost for raw materials like asphalt and concrete will skyrocket in the coming year.

Is 2.5 inches of asphalt enough for a driveway?

Residential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate. Underneath this you have soil.

How much is a 700 ft driveway?

For a larger driveway or thicker base, the cost will be higher. For example, a driveway 15 feet wide by 700 feet long with a six inch base will need approximately 25 tons of gravel, at a material cost of about $700. With delivery, the total cost will be around $1000.

Why do they put fabric under asphalt?

It functions by creating a moisture barrier between the old asphalt layer and the overlay, decreasing introduction of water into the base, reducing the effects of reflective cracking and aiding in the flexibility of the pavement.

Why is asphalt used instead of concrete?

Asphalt provides a nicer, smoother, often quieter ride when relatively new. Concrete can be noisier because it is tined or broomed during construction to make it rough enough to provide good tire grip.

Which is stronger concrete or asphalt?

This answers the question. Asphalt and concrete will provide the same traffic-carrying strength when the same thickness is used. A pavement with a SN of 10.0 will always be twice as strong as pavement with a SN of 5.0, regardless of the material used.

Is asphalt good for a patio?

While gravel and asphalt work for driveways, neither is a great choice for a patio. If you're looking to do both projects at once, another material option is likely more suitable.

Do driveway pavers increase home value?

While there are no hard numbers on it, this suggests that a paver driveway would be a good option to increase the value of your home. Like other exterior changes, adding pavers can make a dramatic impact on the curb appeal of your property, which can improve its value and shorten the time that it is on the market.

How thick should blacktop driveway be?

Residential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate. Underneath this you have soil.

What is the difference between asphalt and paving?

Pavement and asphalt are made with distinct purposes in mind. The pavement is made to be walked on, so it has a high amount of grip that allows people to walk without slipping. Asphalt is made with vehicle traffic in mind so it is relatively smooth and can bear big weights for years at a time.

How much does it cost to lay asphalt over concrete?

Laying new asphalt over a concrete driveway costs $1 to $3 per square foot. Contractors fill cracks with concrete-repair caulk before paving. Resurfacing concrete with asphalt is cheaper than replacing concrete. However, special preparation is required to stabilize the concrete and prevent cracks.

How much does it cost to remove asphalt?

Cost to remove an asphalt driveway. The average cost to remove an asphalt driveway is $1 to $3 per square foot , depending on the thickness. This price includes demolishing and hauling away old asphalt. The gravel sub-base may stay in place after removing the old asphalt if it's in good condition.

How thick should a driveway be?

A new residential driveway needs 3 to 5 inches of asphalt over 4 to 8 inches of rock-base foundation to withstand temperature changes and last 20+ years. Some companies recommend a 2" thickness to save $0.50 to $1 per square foot, but won't provide a warranty due to deterioration risks.

How long does asphalt last?

An asphalt driveway lasts 15 to 30 years and requires sealcoating every 3 to 5 years. Boosts curb appeal and resale value. A new asphalt driveway needs an asphalt layer 3" to 5" thick to last. Resurfacing only the top layer or asphalt overlay costs $1 to $3 per square foot.

How old is a driveway for asphalt resurfacing?

Asphalt resurfacing is best for driveways less than 15 to 20 years old with good foundations that have widespread yet shallow cracks.

How much does stamped asphalt cost?

Colored or stamped asphalt costs $5 to $15 per square foot for a new driveway or replacement, or $3 to $8 per square foot for resurfacing the top layer. A 20x20 stamped asphalt driveway costs $2,400 to $6,000. Decorative patterns are sealcoated, which colors and protects the surface.

How much does it cost to resurface an asphalt driveway?

Resurfacing an asphalt driveway costs $1 to $3 per square foot compared to replacing at $4 to $10 per square foot. Resurfacing a 2-car (20’x20’) asphalt driveway costs $400 to $1,200, while a complete replacement costs $1,600 to $4,000 on average.

How much does it cost to pave an asphalt driveway?

Paving an asphalt driveway costs $4,912 on average, with a typical range between $2,996 and $6,851 . This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor. If you need replacement, you’ll pay $8 to $15 per square foot.

How much does asphalt curbing cost?

Asphalt Curbing. Asphalt curbing costs $975 to $1,625. At $13 per square foot, curbs run more because of extra labor and a higher average thickness for the material. The width of the average residential lot is 75 to 125 feet.

How much does it cost to pave a 100 foot path?

Paving a 100-foot asphalt path costs $1,750 to $3,250. The average pathway is about 30 inches wide. Designs with complicated curves increase the total because they add to the square footage.

How much does it cost to stamp asphalt?

Stamped or colored asphalt costs $12 to $17 per square foot for the entire surface. If you only need the top coat, you’ll pay $5 to $10 per square foot.

How much does cold mix asphalt cost?

Cold mix asphalt costs $10 to $50 per bag, but you can only use it for temporary repairs. Cold mix isn’t designed for the whole surface because it lasts for one or two seasons.

How many square feet does a ton of asphalt cover?

One ton usually covers 40 to 80 square feet. The amount you need depends on the thickness of the layers: 2 inches thick: 80 square feet per ton. 4 inches thick: 40 square feet per ton. For the average driveway, you’ll need 7.5 to 15 tons. "The complexity of the job itself weighs heavily on the price of an asphalt job.

How much does hot mix cost?

Hot mix asphalt costs $100 to $200 per ton. This is the standard type for all-weather surfacing and repairs. Cold mix asphalt costs $10 to $50 per bag, but you can only use it for temporary repairs. Cold mix isn’t designed for the whole surface because it lasts for one or two seasons.

How much does a patio cost?

Most patios fall between $10 and $15 a square foot for average materials. The more intricate the design or more labor-intensive the layout, the higher the costs.

How much does it cost to build a patio?

The cost of a patio large enough to hold an outdoor kitchen and entertainment area ranges from $6,912 to $21,600. This is a large, spacious patio that can be used for several things. Typical measurements are 24’ x 36’ or 864 sq.ft. This patio can be shaped in multiple ways to designate various areas. The kitchen may be located on one side, while a fire pit, seating areas, or hot tub may be on another. It is common for this patio to have pattern changes to designate various areas and create a visual separation.

How do I build a patio?

Additional Considerations and Costs 1 When planning your patio position, consider the sun exposure, particularly if you want to sunbathe. Choose a section with good sun exposure or a shady area for dining and relaxing if you live in a hot climate. 2 If you have shifting soil in your yard, consider using poured concrete because pavers are not the best option. 3 Patios do not have as high an ROI as decks or porches but historically have come in at around 55% in the last few years. 4 Due to drainage and water flow, do not install your patio in a low spot on your property. 5 When removing an old patio before installing a new one, add in additional labor costs. Most demolition costs an additional $5 a square foot.

What is a patio roof?

Patio roofs are a type of patio cover. Rather than a softcover like an awning, this is a permanent hardcover closely resembling a pavilion. These roofs can be made of many materials, with wood and aluminum being the two most common. You can also build a patio roof and shingle 11 it to resemble your home’s roof.

How much do solar lights cost?

The cost of solar lights for your patio ranges from $10 to $150. Solar lights are a great addition to patios because they do not require an electrical connection. Most can also be installed DIY, so there are no additional costs. The lights come in many varieties, from those attached to your home’s side or a pillar to those staked in the ground. Some solar lights can even be disguised as rocks so that you can hide them in your landscaping. Most solar lights come in groups so that you can purchase up to 10 at once and illuminate large areas in minutes.

Why is drainage important for a patio?

Drainage is an important part of patio design. A flat patio collects water and develops issues, such as cracking or sinking. Most patios are designed to slope away from your house, which allows the water to drain naturally. If this is the case, you do not need additional drainage added, and you can install your patio right away.

How much does an outdoor sunroom cost?

An outdoor sunroom patio ranges from $1,152 to $3,600. This patio is 12’ x 12’ or 144 sq.ft. and large enough to arrange chairs for relaxing or a quiet conversation when entertaining. This patio typically has a cover. This can be a pergola 1, pavilion, or awning. It can be screened but is typically not. This patio often uses outdoor tile or pavers for the flooring. This creates a space bridging between indoors and outdoors.

How much does a patio cost?

A professionally installed patio typically costs between $2,363 and $5,909, for an average price of $3,994. The national average for a professionally installed patio is around $3,994, but the average range starts around $2,363 and goes up to $5,909. This includes excavating the patio site, materials, materials delivery, ...

How much does a concrete patio cost?

So, our average 240 square foot DIY concrete paver patio comes out to $1235.01 – $1250.05, plus delivery fees, if applicable.

How much does a 40 lb bag of sand cost?

Every six months or so, check to see if the regular or polymeric sand between your pavers is low. Keep the sand filled to a quarter inch below the pavers’ surface. A regular 40-pound bag of patio sand runs around $4, and 48 pounds of polymeric sand costs about $22.

How much does it cost to install a flower bed on a patio?

If you’d like to install seasonal color, perennials, flower beds, or shrubs around your new patio area, plan on $4 – $14 per square foot in installation costs.

Why do people put patios on their patios?

Whether you are an avid DIYer or you want someone else to handle logistics and installation, a patio can be an affordable way to enjoy more sunshine and outdoor time with family and friends.

How much does a two chair patio table cost?

A basic two-chair table set starts at around $100, but be prepared to pay up to several thousand dollars to outfit a large patio with several dining sets, sectionals, and chairs.

What are the two most important considerations when choosing patio materials?

Materials and square footage are probably the two most important considerations if you are trying to control your costs. Below are the average ranges for some of the most popular patio materials.

How much does a patio cost?

Typical Range: $3,476 to $8,872 (for a 400-square-foot patio) or $8.69 to $22.18 per square foot

How much does it cost to install a patio?

On average, installing a paver patio costs $8.69 to $22.18 per square foot for labor and materials.

What is the difference between a brick patio and a stone patio?

Your choice of paver material has a significant impact on your paver patio’s overall design. A brick paver patio offers your backyard a classical look, while a natural stone patio satisfies a luxurious taste.

How much does it cost to add a paver walkway to a patio?

Adding a paver walkway to your patio will often cost the same per square foot as the patio itself, ranging from $8.69 to $22.18 per square foot.

What is a paver patio?

A paver patio opens the door to years of outdoor entertainment with family and friends. Lounge around by the pool, host a backyard dinner party, and cozy up by the fire pit.

What affects the cost of pavers?

Factors that typically affect your paver patio budget include the patio’s size, location, paver materials, and design.

How much does it cost to install a 400 square foot patio?

To install a 400-square-foot paver patio, most homeowners spend between $3,476 to $8,872.

How much does a paver patio cost?

Paver patios cost between $2,400 to $7,000, or an average of $3,400 nationally, and can boost your property value. A patio is an easy way to dress up a backyard and increase space for entertaining. Concrete is a classic choice, but for a unique, eye-catching patio, consider pavers.

How much does it cost to install a paver patio?

Brick, stone, and slate are just some of the options for a paver patio that can be designed to carry a home’s design into the backyard. For paver patio cost, homeowners can expect to pay an average of $3,400, or between $2,400 to $7,000, to install a 280-square-foot patio. Specialized designs or complex jobs could run closer to $10,000. The final price of a paver patio is primarily dependent on the material choice, the size of the patio, and labor. Here are all the factors you need to know about paver patio costs.

How to determine the size of pavers needed?

A brickyard will be able to provide estimates based on the total square footage for whichever stone you’re interested in. If you know the size of the pavers you prefer, use a paver calculator to estimate the number of pavers you need based on patio size.

How much does it cost to add electrical outlets to a paver patio?

Still, if your patio is large or extends deep into the backyard, it’s worth considering adding electrical outlets on the far side ($500 to $2,000). Water lines for a kitchen or small shower ($400 to $1,900) and gas lines for a barbecue ($15 to $25 per linear foot) would need to be installed before grading and leveling the base.

What is the cost of brick pavers?

A traditional red brick patio is an iconic look in some regions, but other colors like tan or gray can also be used. They range from $0.25 to $4 per brick or $4 to $8 per square foot.

How much does it cost to install flagstone pavers?

Flagstones have irregular shapes and sizes, so laying them on the patio is like working a jigsaw puzzle. Flagstone comes in a variety of colors, which adds some flair to the patio. You can expect an average of $10 to $30 per square foot to install flagstone pavers.

How much does slate cost?

You can purchase it for an average of $15 to $50 per square foot, or choose a slate concrete look-alike that’s much more durable, comes with more color options, and costs $11 to $30 per square foot.

How much does concrete pavers cost?

While concrete pavers cost around $5 to $10 per square foot, it is a very manually intensive task resulting in more than 50% of the project cost coming from the labor costs. While both concrete and pavers need a good sub base, without correct impaction procedures, pavers can drift apart.

How much does it cost to pour a concrete patio?

The average cost to pour a concrete patio is $2,433, with most homeowners paying between $1,212 and $4,318 for professional installation. Labor costs can run between $3 and $10 per square foot and materials cost $1 to $2 per square foot. The total price depends on the size of your patio, if your patio is going to have curves or a complicated pattern, and if you choose a unique design finish.

What is subgrade in patio?

Subgrade is the earth underneath the patio structure. If this is not professionally prepared, there is a high chance that the concrete will crack as it settles. Make sure that the subgrade soil is prepared so that it gives adequate, firm support and will not move or wash away.

How much does it cost to stain concrete?

The cost of stained concrete for a single stain color with sealer is $2 to $4 per square foot. As the complexity and detail rise, the cost will follow. This is the most sought-after permanent color treatment for cement and concrete patio surfaces.

Which is more expensive, a stone patio or a concrete patio?

While there is a broad range of options available within each of the alternative patio construction choices, of the most common options available, the stone patio option will generally rank as the highest cost project, and a concrete patio is usually the least expensive choice.

How long does concrete last on a patio?

It’s especially suitable for warmer climates because it doesn’t absorb heat well, and it can last for up to fifty years without needing to be resurfaced or resealed. You can even install concrete pavers by hand and avoid the cost of pouring concrete.

How much does stamped concrete cost?

Stamped concrete costs around $1.50–$1.70 more per square foot. Choose a contractor who has a portfolio of front-line stamping work.