Cost of Asphalt Millings
| Estimate Type | Cost Per Ton | Cost Per Yard |
| Low-End Estimate | $10 | $13 |
| Mid-Range Estimate | $15 | $19 |
| High-End Estimate | $25 | $30 |
How much do asphalt millings cost per square?
How Much Do Asphalt Millings Cost Per Square. ... May 01 2021· Asphalt cost per square foot $2 $4 Asphalt cost per ton $90 $150 Another important factor in determining the amount of material required is the thickness of the driveway For residential driveways 2 to 3 inches of asphalt is usually adequate .
How much per hour to Mill asphalt?
If the machine is paced correctly, operators can achieve both a productive quantity and high quality mill. “If you look at the average milling job per hour, you’re only cutting for 30 to 40 minutes,” says Chastain. “With truck exchange, water stops and checking teeth, these variables don’t allow us to cut for a solid hour.
How much does it cost to Mill asphalt?
Recycled asphalt millings cost $12 to $32 per yard or $10 to $20 per ton. Asphalt millings for a 2-car driveway costs $60 to $240 without installation. A recycled asphalt driveway costs $2 to $5 per square foot or $1,200 to $3,600 installed. Crushed asphalt prices depend on quality. *Based on a 4-inch depth. All prices not including installation.
How to calculate asphalt millings?
Calculate Asphalt Millings. Type in inches and feet of your project and calculate the estimated amount of Recycled Materials in cubic yards, cubic feet and Tons, that your need for your project. The Density of Asphalt Millings: 2,410 lb/yd³ or 1.21 t/yd³ or 0.8 yd³/t. Type in your numbers.
How many square feet will a ton of asphalt millings cover?
A ton of asphalt millings typically covers about 80 square feet at 3 to 4 inches thick.
How much area does a ton of millings cover?
Calculate Asphalt MillingsCoverage (Square feet)400sq ftVolume (Cubic yards)2.5cu ydEstimated amount (Pounds)5,951lbEstimated amount (Tons)2.98tonAmount +15% compression3.42ton2 more rows
What is the difference between crushed asphalt and asphalt millings?
Asphalt Millings vs. The clear advantage of using asphalt millings is that you're using recycled material instead of simply discarding it. Discarded asphalt can often end up in landfills where it takes up considerable space, but asphalt millings repurpose old material and give the millings a second chance.
Are asphalt millings better than gravel?
Not only does asphalt gravel stand up to the toughest of weather situations, snow even melts off it faster, and ice is harder to form. Recycled asphalt can be used in a variety of different uses - both where you would traditionally use either stone gravel or hot asphalt.
How far will a ton of asphalt millings go?
A ton of asphalt millings covers 60 square feet on average, while a cubic yard covers 80 square feet at 4" deep.
How many tons of asphalt millings fit in a dump truck?
Super Dumps are capable of hauling payloads from 19 to 26 tons, if you can properly distribute the loads to each axle. A typical tandem dump truck is limited to about a 13-ton payload in accordance with federal bridge law. Increased truck capacity is important when directly unloading into the asphalt paver.
Do asphalt millings need a base?
Once your space is clear and graded, you must create a solid base for your millings. Compact the area with a drum roller compactor to ensure that there are no pockets of air or unstable soil in your foundation. Next, you must apply a layer of crushed rock or riprap.
What is the cheapest material to use for a driveway?
gravelAggregate, or gravel, is the cheapest and most durable of these four common driveway materials.
Will asphalt millings get hard?
In contrast, asphalt millings are laid without using heat. This “cold mix” asphalt is laid and cured at the ambient outdoor temperature. The best way to finish it once it is laid is to compact it with a steamroller. Once properly compacted, the surface will harden nicely over time.
How do you seal a Millings driveway?
8:5110:50How to Rejuvenate and seal Asphalt Millings - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo if you're looking for a way to get a hard-surfaced driveway or parking lot hawk seal is a viableMoreSo if you're looking for a way to get a hard-surfaced driveway or parking lot hawk seal is a viable option you can get millings cheap the key is is is packing it.
Can you put asphalt millings on top of gravel?
Gravel driveways are also more difficult to plow and are prone to getting ruts. In the summer, driving on gravel can stir up dust and debris. For these reasons, our contractors often recommend asphalt millings over gravel.
How do you put down asphalt millings?
0:2233:46Red neck paving my driveway #millings - YouTubeYouTubeStart of suggested clipEnd of suggested clipLike the tap half-inch of asphalt off that's like the best asphalt. There is is that top half-inch.MoreLike the tap half-inch of asphalt off that's like the best asphalt. There is is that top half-inch. So I make a really good milling so anyways I bought a bunch of these millings.
How much ground does a cubic foot cover?
Bags or Bulk There are 27 1 cubic foot bags or 18 1.5 cubic foot bags of mulch per yard. Consider a ½ cubic foot bag of stone or soil weighs about 50 lbs and will cover 2 square feet at 3" deep. A bag of hardwood or cedar bark contains about 1 cubic foot of material, enough to cover about 4 square feet at 3" deep.
How much ground will a cubic yard cover?
100 square feetOne cubic yard of soil covers 100 square feet at a 2 inch depth.
How many square feet is 10 cubic yards?
32.4 sq feet3 Divide the total square footage of area being covered by the square foot coverage per cubic yard; based on desired depth in the table below. 4 The number found tells you how many cubic yards are needed for the area at that depth....Coverage Chart- Bulk Material.Depth1 Cubic Yard Covers7”46.3 sq feet8”40.5 sq feet9”36 sq feet10”32.4 sq feet9 more rows•Jan 29, 2010
How much will .8 cubic feet cover?
Coverage Chart- Bagged Material (2 Cubic Foot Bags)DepthOne 2 Cubic Foot Bag Covers6”4 sq feet7”3.4 sq feet8”3 sq feet9”2.7 sq feet9 more rows•Jan 29, 2010
How much does a ton of asphalt millings cost? - AskingLot.com
Recycled Asphalt Cost (Also Known as Asphalt Millings) The cost is typically between $7-$15 per ton depending on recycling company and percentage of recycled asphalt but can fluctuate to about $60. New asphalt can cost $100-$200 per ton.
Calculate Asphalt Millings | cubic yards / Tons
Tel. Phonenumber Fax. 850 273 5707 Gravelshop.com Sand Group USA inc. 5730 SW 23rd St Miramar, FL 33023 Established 2012
2022 Cost of Asphalt Milling - HomeAdvisor
Recycled Asphalt Costs. The cost of recycled asphalt ranges from $7 to $60 per ton depending on geographic location and the percentage of recycled material in the mixture. Homeowners typically spend between $55 and $460 for asphalt millings to pave a standard-sized double driveway. That cost does not include installation labor and materials.
Uses of Asphalt Millings
Asphalt millings can prove to be very useful in a residential setting. They are recyclables that you can use to line different parts of your home. The appearance of asphalt millings is also something you can take advantage of.
Asphalt Millings vs. New Asphalt
Asphalt surfaces can be positive additions to your property, but which type should you choose? Is using asphalt millings okay or should you go use new asphalt?
Related Questions
Because asphalt millings are recycled materials, some might assume that they won’t last long. You should know that longevity is not an issue for them.
What is asphalt milling?
Asphalt millings are recycled asphalt, milled, heated and reused in various residential projects. Recyclers crush and reuse asphalt to pave driveways, patios, sports courts and parking lots. They spread, then compact the pieces to create a smooth surface. Not only is it more cost-effective, but it's also more environmentally friendly ...
How much does a ton of asphalt cost?
One ton of asphalt millings covers 80 square feet at a few inches thick. A ton costs between $7 and $60, depending on the amount of recycled asphalt pavement in the mixture. The fewer recycled materials the more expensive the mix.
How much does it cost to recycle asphalt?
The cost of recycled asphalt ranges from $7 to $60 per ton depending on geographic location and the percentage of recycled material in the mixture. Homeowners typically spend between $55 and $460 for asphalt millings to pave a standard-sized double driveway. That cost does not include installation labor and materials.
How thick is a ton of asphalt?
A ton of asphalt millings typically covers about 80 square feet at 3 to 4 inches thick.
What is recycled asphalt used for?
Recycled asphalt can be used in a variety of residential and commercial applications. It's a good alternative for driveways, patios, walkways, basketball and tennis courts, playgrounds and small parking areas.
How much does it cost to build a tennis court?
A 78 by 36-foot tennis court requires 35 tons of recycled asphalt at an average cost of $702. The cost to build a basketball court averages $35,000. Part of that cost includes the cost of materials like asphalt. Using recycled asphalt instead of virgin materials can lower the material cost.
Can you recycle asphalt?
Yes, 81 percent of asphalt that's removed from roads and parking lots is currently recycled. Homeowners who want to replace existing asphalt surfaces can recycle the material. A contractor can help get used asphalt to the proper facility, or homeowners can consult their local solid waste management district.
How much does asphalt cost per ton?
Asphalt cost per ton. Asphalt costs $40 to $80 per ton on average. Asphalt prices vary depending on the mix and material ingredients. One ton of asphalt covers 30 to 80 square feet. A 2-car driveway needs 7.5 to 18 tons of asphalt, depending on the thickness. Asphalt cost per ton by material - chart.
How much does it cost to haul asphalt?
A bulk truckload of asphalt costs $500 to $1,800, including delivery fees. Tandem trucks carry 13 to 20 tons of asphalt that cover 550 to 850 square feet with a layer 3 to 5 inches thick. Prices vary according to the asphalt-delivery distance.
How much does it cost to rent an asphalt paving machine?
Renting an asphalt paving machine costs $750 to $3,600 per day on average. Asphalt roller rental costs $120 to $700 per day for ride-on compactors 3 to 4-foot wide. Renting asphalt paving machinery sometimes requires a commercial driver’s license and additional training.
How much does a 50 lb bag of asphalt cost?
A 50 lb. bag of cold-patch asphalt costs $8 to $20 and covers 5 to 7 square feet at a 1" depth. Cold-patch asphalt is the only DIY-friendly option that cures by compaction alone.
How many tons of asphalt is in a cubic yard?
There are typically 2 tons in 1 cubic yard, depending on the mixture's density. A cubic yard covers 65 to 110 square feet with an asphalt layer 3 to 5 inches deep.
What is the difference between asphalt and blacktop?
The terms “asphalt” and “blacktop” are slightly different. Highway pavers use asphalt, which contains less stone than real blacktop. Blacktops are used for residential areas with less traffic, are easier to repair, and more durable than asphalt.
Asphalt Millings Vs Gravel
Asphalt millings perform better than gravel due to their capacity to bond following compression. However, it will be less durable than pavers or concrete. As a result, if you require something more substantial than asphalt millings, it is prudent to choose an alternative.
What Is Asphalt Rejuvenator?
An asphalt rejuvenator chemically revitalizes and protects the asphalt binder maltenes by penetrating the asphalt well below the surface.
How To Seal Asphalt Millings
You should seal a recycled asphalt driveway just like you would new asphalt. While many homeowners are capable of sealing their new asphalt driveways themselves, asphalt millings are a little more challenging.
Will Maintenance Be Required on My Asphalt Millings? How Long Does It Last?
Over time, your asphalt millings will actually strengthen as the material joins more tightly due to compaction and heat. It has a lifespan of 20-30 years and is fairly resistant to temperature and weather changes.
How To Harden Asphalt Millings
With a steam roller, roll over the asphalt layer. The steam roller will compress and heat the recycled asphalt to the point where it virtually melts together and then hardens to make a surface as durable as new asphalt. Allow at least 24 hours for the asphalt to cure.
How Long Do Asphalt Millings Take to Harden?
Allow 24 hours for curing after spreading and compacting your millings. The wonderful thing about asphalt millings is that they will continue to harden for a further 24 hours.
How Well Do Asphalt Millings Hold Up?
Asphalt millings are far more durable than gravel. The majority of asphalt millings retain tar and oils from the initial asphalt production, which aid in bonding when rain, heat, and pressure are applied. Additionally, an asphalt millings driveway lowers dust and looks almost identical to pavement.
How much does asphalt cost per ton?
How much does a ton of asphalt millings cost? Recycled Asphalt Cost (Also Known as Asphalt Millings) The cost is typically between $7-$15 per ton depending on recycling company and percentage of recycled asphalt but can fluctuate to about $60. New asphalt can cost $100-$200 per ton. Click to see full answer.
How much does 3 inch asphalt weigh?
You don't mention if you're planning to compact it, but compacted cold mix asphalt weighs roughly 140 pounds per cubic foot, or 3780 pounds per cubic yard.
Do millings make a good driveway?
Do asphalt millings make a good driveway? Not all of the milled asphalt is reused in new asphalt. Most projects limit millings to no more than 30 percent of the volume of the new mix. There are other uses for millings such as on driveways or on less traveled roads.
Products - Bituminous Materials Price Per Ton (valid thru June 30, 2021)
NOTE: Mix Customers are responsible for ordering mix that meets their specific job requirements.
Dump Prices
NOTE: Only clean broken asphalt will be accepted. All contaminated loads will be rejected. Acceptance of broken asphalt for non-mix customers is contingent on the availability of space in our yards.
NTEA (Non-Tracking Emulsified Asphalt) Prime Pricing
NOTE: A minimum charge of $525 is required. Demurrage time will be charged at a rate of $129.00 per hour.
Additional Notes
Listed prices do not include Illinois Sales Tax (10.0% for Mount Prospect and 7.75% for Crystal Lake).