Receiving Helpdesk

asphalt driveway replacement cost estimator

by Prof. Andre Oberbrunner DDS Published 3 years ago Updated 2 years ago

The average cost to repave an asphalt

Asphalt

Asphalt, also known as bitumen is a sticky, black and highly viscous liquid or semi-solid form of petroleum. It may be found in natural deposits or may be a refined product; it is a substance classed as a pitch. Until the 20th century, the term asphaltum was also used. The word is derived fr…

driveway is $6 to $12 per square foot with a new gravel base or $5 to $9 per square foot with an existing base. Repaving a 2-car (20’x20’) asphalt driveway costs $1,800 to $4,200 on average. Repaving includes removing and hauling away the existing asphalt.

Asphalt driveways typically cost $4,000 – $8,000 to install, depending on the size, local labor rates, and amount of prep work needed. If you need to remove an existing driveway the costs could increase.

Full Answer

How much does it cost to repair an asphalt driveway?

Repairing your asphalt driveway tends to cost between $800 and $2,500, depending on the same factors mentioned above. The national cost average for this project is about $1,500. Several special considerations apply, especially compared to concrete driveways.

How to resurface a driveway?

What’s the process for resurfacing a concrete driveway?

  1. Preparation and cleaning of the concrete surface. This step is all about creating an even concrete surface. ...
  2. Applying the base coat. A thin base coat is applied over the concrete and screeded till it’s level.
  3. Applying the resurfacing compound. ...
  4. Sealing of the surface. ...

How to estimate asphalt repair?

  • Untreated potholes lead to faster pavement deterioration.
  • Asphalt repair costs depend on the size, depth, and repair method.
  • Minimum call-out fees of $100 to $250 apply to all asphalt repairs.
  • Sealcoating the asphalt driveway after repairs gives a longer-lasting finish.

How much does asphalt driveway cost?

This leads to a national average of $3,000 to $10,000, with most people paying around $5,804 for a 24 by 24-foot hot mix asphalt driveway with a stone base. The low-end costs are as little as $1,214, while high-end projects cost as much as $13,441.

How do you calculate the cost of an asphalt driveway?

For the simplest estimate, you can use this formula.Length x width=Square footage of the driveway.Driveway sq ft x $3= low end cost.Driveway sq ft x 7= high end cost.Driveway sq ft x $2= low end cost.Driveway sq ft x $4= high end cost.When to reseal your driveway:When to repave your driveway:

How much is a 700 ft driveway?

For a larger driveway or thicker base, the cost will be higher. For example, a driveway 15 feet wide by 700 feet long with a six inch base will need approximately 25 tons of gravel, at a material cost of about $700. With delivery, the total cost will be around $1000.

Is it cheaper to pour asphalt or concrete?

Cost. The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.

Is replacing a driveway a good investment?

You can definitely get a great return on your investment. At the very least your property value increase will cover the cost of the driveway. The amount of added value can fluctuate. Depending on the home, a new driveway can add around $5,000 to $7,000 in value.

Is asphalt the same as blacktop?

Blacktop is heated to approximately 150 degrees celsius, whereas asphalt is only heated to 120 degrees celsius. Asphalt is has a higher bitumen content and for that reason is less porous and more resilient to wear and tear from high traffic and thus is the preferred choice for major highways.

What is the cheapest way to do a driveway?

A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway's sub-base is sound.

What type of driveway lasts the longest?

ConcreteConcrete is the old standby for driveways. Most suburban homes opt for this material for two big reasons: Concrete is typically the longest-lasting driveway surface, and, if installed properly, it is practically maintenance-free.

What type of asphalt is best for driveways?

Hot mix asphaltHot mix asphalt is considered best for driveways, because construction and design features are suitable to giving it a finished appearance that complements the home.

Cheapest Driveway Material?

Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maint...

How Long Does a Driveway Last?

Driveways typically last around 30 years total, but some need more maintenance than others. Asphalt and concrete driveways need maintenance every f...

How Much Value Does a New Driveway Add?

On average a new driveway can add between $5,000 to $7,000 in added home value. Of course, that value depends upon the size of your driveway.

Which is Cheaper? Concrete or Asphalt Driveway?

Asphalt runs slightly cheaper than concrete with an average square foot cost of $3 to $7 but it won’t last as long as concrete. A concrete driveway...

How Long to Wait Before Driving on New Driveway?

It’s typically recommended that you stay off a new asphalt driveway for 24 hours, longer if it’s humid out. If you have a concrete driveway, you’ll...

How Often Should You Seal a Driveway?

Professionals recommend resealing an asphalt driveway every three to five years but it could be sooner depending upon the state of your driveway. P...

How much does it cost to install asphalt?

Asphalt paving material usually costs $40-80 a ton. One ton will cover 30 to 80 square feet. A residential driveway averages 9-24 square feet. Other materials are needed for asphalt driveway installation as well, and will affect the final cost.

How much does a paver driveway cost?

They offer a wide variety of designs, shapes, sizes, and colors. A paver driveway will cost between $13-15 per square foot. A poured concrete driveway ranges from $7-9 per sq ft.

What is the most expensive option to have a driveway removed?

Repaving. Repaving your driveway requires removing the old driveway completely. This is the most expensive option, because you will be paying to have the old driveway removed and a new driveway installed. This is of course the most expensive option, but a paved driveway has a lifespan.

What is resurfacing a driveway?

Resurfacing is the middle ground of driveway repair. It’s also known as asphalt overlay. In many cases, this can repair significant asphalt cracks. Existing asphalt is covered with a new layer of asphalt, in a process similar to the original driveway.

Why does asphalt crack?

Over time, the heat from the sun’s rays will begin to break down the materials in the asphalt and remove moisture. As the asphalt weakens due to the sun, cracks begin to form.

How long can you drive on a driveway after it's installed?

You won’t be able to drive on our driveway for 3-5 days after it’s installed. You’ll need to avoid parking on the driveway for the first 14 days, particularly in the hot part of the day.

What is the cheapest driveway?

A gravel driveway is the cheapest option if you need a new driveway, at $1-3 per sq ft. It matches with any style of home. Classic gray gravel is well suited to a winding country drive. White gravel provides a modern look.

Driveway Costs

A new driveway can add some curb appeal and more. It comes with a cost and a commitment for a few days to get the project done. A driveway costs between $1,700 to $7,000 for materials and averages $4,500. Expect to pay between $2 and $15 per square foot for materials and installation.

Driveway Cost Per Square Foot

The cost of a driveway will depend upon the condition of your current driveway, its size and the material you want to use. Gravel is the cheapest material to use at just $1 to $3 per square foot while a heated driveway is the most expensive at $12 to $18 per square foot.

Driveway Cost by Material

A gravel driveway is the cheapest way to go and it’ll last more than 100 years with regular maintenance. But it’s not attractive to every homeowner and tends to kick up dust on vehicles. Concrete driveways remain a low-cost option because they come in slightly cheaper than an asphalt driveway and often require less maintenance.

Driveway Construction Cost

Building a driveway will cost around $3 to $12 on average, depending upon the size of the driveway and the selected material. Expect to pay as much in labor as you do for materials. Labor costs can increase if the driveway needs leveling, too.

When to Build a Driveway

Depending upon your climate, summer is likely the best time to build a driveway. Plan when there are a few clear days of moderate temperatures. Installing an asphalt driveway is dirty work and you need a few days of clear skies to get it done.

Frequently Asked Questions (FAQs)

Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maintenance and dust suppression.

How thick should a surface be for asphalt?

The thickness should be about two inches as it is considered a standard for asphalt overlays and surface courses. Two-inch thickness has the potential to properly bonds the surface course to the binder course. If the thickness is less than two-inch it will cause raveling, cracking, and other asphalt issues.

What is hot mix asphalt?

Hot Mix Asphalt: It is also known as the “Dense-Graded Mix”. This type of asphalt is considered ideal for surfacing and repairing needs. During its production, the binder will be heated at a very high temperature to reduce viscosity. The high temperature will also remove all moisture prior to mixing.

Is asphalt a liquid or semisolid?

Asphalt is a semi-solid form of petroleum and appears in a sticky, black, highly viscous liquid form. It is classified as a pitch and can be found in natural deposits as well as a refined product. If it has a mixture of 95 stone, sand, or gravel that bounds together by asphalt cement, then it will be known as hot mix asphalt. ...

How much does it cost to build a driveway?

The cost to build a driveway ranges from $600 to $18,000, depending on the material. The cheapest driveways cost $1 to $3 per square foot for gravel, while standard concrete and asphalt driveways cost $3 to $8 per square foot.

How much does it cost to install a concrete driveway?

Concrete driveway. Installing a concrete driveway costs $2,400 to $4,800 on average or $4 to $8 per square foot for plain gray concrete. Adding decorative colors, borders, stamped patterns, and finishes costs $8 to $18 per square foot. Concrete lasts 30 to 40 years and handles hot climates better than asphalt.

How long does a concrete driveway last?

Asphalt driveways last 15 to 30 years, and concrete driveways last 30 to 40 years on average, depending on the climate and usage. Brick and stone pavers last 25 to 50 years. A cobblestone or gravel driveway lasts up to 100 years if well-maintained.

What is the cheapest driveway material?

The cheapest driveway material is gravel at $1 to $3 per square foot using aggregate made of crushed shells, crushed concrete or asphalt, or pea gravel . Tar and chip seal driveways are the second cheapest at $2 to $5 per square foot.

How much does gravel cost?

Well-built gravel driveways require light raking and new gravel once or twice a year. Gravel prices range from $10 to $50 per ton, depending on the stone size and type.

How much does an exposed aggregate driveway cost?

Exposed aggregate or pebble finish driveways cost $5 to $11 per square foot or $3,000 to $6,600 on average. Exposed aggregate features stones mixed into concrete or seeded on the surface. Natural aggregates provide a textured, nonskid surface in various colors, including pastels, earth tones, and deep reds and blues.

How much does a chip seal driveway cost?

Chip seal driveways cost $1,200 to $3,000 or $2 to $5 per square foot. Chip seal, also called tar and chip, lasts 7 to 10 years. Tar and chip driveways have the durability of blacktop, come in various colors, and feature layers of stone aggregate spread over hot liquid asphalt.

How long does it take to pave a 40 foot driveway?

The amount of time it takes for a professional to pave an 40-foot asphalt driveway is usually one or two days, followed by not using the driveway for an additional 2 days.

Is asphalt driveway better than concrete?

A fresh asphalt driveway bring s a lot of curb appeal and utility to your home at 30%-45% less than the cost of a concrete drive. It’s an ideal option for all but the hottest climates; Asphalt is the material of choice in Northern climates where the freeze and thaw cycles plus salt deteriorate concrete surfaces.

How much does asphalt cost?

It costs $8.50 per square foot — $2040 for a single-car driveway and $3553 for a two-car sized drive — and is available in colors on the black-gray spectrum. The cost of materials plus labor averages $3500—$4100.

How much does it cost to pave a driveway?

Nationwide, paving a driveway costs between $2700 and $6500. Depending on the size of your driveway and choice of materials, you could pay as little as $1200 to $12,000 or more. The average homeowner spends $4000.

How long does a gravel driveway last?

With care, a gravel driveway can last 50 years or more before it needs a major overhaul. Gravel does have drawbacks. It’s not as hard or even as asphalt or concretion and can be a tripping hazard. It’s prone to ruts, and in cold climates, snow removal takes some of the gravel with it.

Why is my concrete driveway heaving?

The small spaces between each allow moisture to drain underneath, but in cold climates, the build-up of water and ice can cause heaving. Pros recommend using thicker, heavier slabs to keep the driveway stable. Drawbacks to concrete driveways include staining — a problem that regular cleaning solves — and cracking.

How much does it cost to repair a blacktop driveway?

Over the 15–20 year life of a blacktop driveway, repairs and maintenance cost $800–$1000. Compared to gravel, however, asphalt is solid to walk on in any footwear, including high heels. Commercial blends may be coarse or smooth. Ultra-smooth surfaces are easier to repair and maintain, but rough finishes offer traction.

Why do people put paved driveways on their homes?

A paved driveway makes your property more functional and attractive. It adds to its resale value and inspires pride. Whether you are planning to sell your home or intend to live in it for a lifetime, nothing says “welcome home” like a professionally paved driveway.

How much does concrete cost per square foot?

Concrete driveways costs slightly more than asphalt per square foot — $9.00 versus $8.50 — but it’s a favorite because it’s durable, attractive and relatively low-maintenance. Estimates for labor and materials average $3900–$6000 for a 240-square foot area.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9