How much does it cost to replace an asphalt driveway?
Asphalt Driveway Replacement vs. Resurfacing. Asphalt resurfacing costs $3 to $7 per square foot compared to $8 to $15 per square foot for replacing.The ideal choice depends on the condition of your existing driveway. If your driveway is in relatively good condition with no potholes, resurfacing can save you $5 to $8 per square foot.If it’s more than 15 years old or in poor shape ...
Is repaving a driveway worth the cost?
Revamping the driveway is one way to do both—and it could even add value to your home, depending on the market, typical homes in your area and the type of material you choose. A driveway paving cost is $4,740 on average, according to HomeAdvisor, but the price tag can vary depending on various factors. Here’s what to know before you dig in.
Should I repair or replace my asphalt driveway?
Typically you’ll need to replace an asphalt driveway after 20 years and a concrete drive after 25 years. Repairing a driveway nearing this age is not considered a wise investment. Beyond the condition of your driveway, many old driveways could do with an update just as a home benefits from renovations.
How is asphalt cheaper than concrete in coating your driveway?
- Even though concrete lasts somewhat longer, asphalt costs considerably less and gives more value for your money.
- Concrete will eventually crack, even in warmer climates. ...
- Asphalt can be tinted and made to look very pleasing, similar to concrete.
- Asphalt does not show stains as bad as concrete.
How often should an asphalt driveway be replaced?
between 15 and 20 yearsAn asphalt driveway will last between 15 and 20 years. You can extend the life of an asphalt driveway with regular maintenance.
Is it cheaper to pour asphalt or concrete?
Cost. The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.
How do you calculate the cost of an asphalt driveway?
For the simplest estimate, you can use this formula.Length x width=Square footage of the driveway.Driveway sq ft x $3= low end cost.Driveway sq ft x 7= high end cost.Driveway sq ft x $2= low end cost.Driveway sq ft x $4= high end cost.When to reseal your driveway:When to repave your driveway:
What is the cheapest way to do a driveway?
A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway's sub-base is sound.
Is asphalt the same as blacktop?
Blacktop is heated to approximately 150 degrees celsius, whereas asphalt is only heated to 120 degrees celsius. Asphalt is has a higher bitumen content and for that reason is less porous and more resilient to wear and tear from high traffic and thus is the preferred choice for major highways.
How much is a 700 ft driveway?
For a larger driveway or thicker base, the cost will be higher. For example, a driveway 15 feet wide by 700 feet long with a six inch base will need approximately 25 tons of gravel, at a material cost of about $700. With delivery, the total cost will be around $1000.
How thick should a asphalt driveway be?
2 to 3 inchesResidential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate.
How much will a ton of asphalt cover?
Asphalt cost per ton One ton of asphalt covers 30 to 80 square feet. A 2-car driveway needs 7.5 to 18 tons of asphalt, depending on the thickness.
How much does recycled asphalt cost?
Recycled asphalt costs between $10 to $20 per ton, compared to $100 to $200 per ton for brand-new asphalt. Using recycled asphalt can save you $675 to $1,350 on driveway materials if it’s available in your area. Sometimes an installer can mill the old material onsite, cutting down on transporting supplies to your home.
How much does asphalt cost per ton?
It costs between $100 to $200 per ton. Cold mix asphalt costs $10 to $50 per bag, but it can be used only for temporary repairs. Cold mix shouldn’t be used for a whole driveway because it doesn’t last more than one or two seasons. Advertisement.
How long does an asphalt driveway last?
Most asphalt driveways last up to 20 years. If your driveway is past its prime and showing its age, it’s time for a replacement. To completely resolve asphalt driveway issues, a replacement is the way to go.
How much does it cost to seal asphalt?
Asphalt sealing typically costs $3 to $7 per square foot. This top coat costs less because it’s a thin layer on top of an existing surface. Asphalt sealant costs about $500 and should be done at least 6 months after the top coat. It provides a layer of protection to avoid cracking and environmental damage. An asphalt driveway requires regular maintenance, and sealing is recommended every 3 to 5 years. Any cracks or fissures should be patched up and remedied immediately.
How many square feet does a ton of concrete cover?
One ton can cover about 40 to 80 square feet, and the total amount needed depends on the thickness of the layers. A driveway 2 inches thick can run 80 square feet per ton, and a 4-inch-thick driveway can run 40 square feet per ton. An average driveway will need 7.5 to 15 tons.
How much does a heated driveway cost?
A heated driveway usually costs $12 to $25 per square foot, depending on whether it’s new or a replacement. For the average home, the cost will be between $7,200 to $15,000.
How much does it cost to excavate a driveway?
Excavating land can cost between $1,500 to $5,100, depending on the number of cubic feet that needs to be moved. Grading, or leveling the area to make your driveway smooth and well-drained, costs between $5 and $10 per square foot for professional graders, but steep driveways may cost more.
How much does it cost to patch asphalt?
Asphalt patching cost. Asphalt patching costs $50 to $300 on average, depending on the size and repair method. The cheapest way to repair an asphalt driveway is with cold-mix asphalt, which costs $2 to $4 per square foot. Hot-mix asphalt repairs are more permanent and always require professional installation.
What is the best way to repair an asphalt driveway?
Depending on the driveway’s age and the level of damages, asphalt driveway repairs include either patching, resurfacing, or repaving. A paving contractor should inspect the asphalt pavement and foundation conditions to provide the best solution.
What to do if your asphalt is not level?
If the asphalt surface is no longer level and has extensive cracks or holes, hire a paving professional. Hire a contractor or smaller company for minor asphalt repairs. Larger asphalt companies typically do resurfacing or repaving jobs only.
How much does it cost to repair a sinking driveway?
Repairing a sinking asphalt driveway costs $2 to $5 per square foot to fill and level small surface areas. Replacing sunken sections costs $4 to $10 per square foot for driveways with foundation issues. Hire an asphalt repair specialist to diagnose the problem.
How much does it cost to fix a pothole?
Pothole patching costs $25 to $40 per pothole plus $100 to $250 for bringing out the machinery and crew.
How much does it cost to replace a garage apron?
Asphalt garage apron repair costs $2 to $5 per square foot to fill and level the sunken pavement. Replacing a 2-car (10’x20’) garage or driveway apron costs $800 to $2,000 on average or $4 to $10 per square foot and is a more permanent solution.
How much does it cost to install asphalt?
Asphalt paving material usually costs $40-80 a ton. One ton will cover 30 to 80 square feet. A residential driveway averages 9-24 square feet. Other materials are needed for asphalt driveway installation as well, and will affect the final cost.
How much does a paver driveway cost?
They offer a wide variety of designs, shapes, sizes, and colors. A paver driveway will cost between $13-15 per square foot. A poured concrete driveway ranges from $7-9 per sq ft.
What is the most expensive option to have a driveway removed?
Repaving. Repaving your driveway requires removing the old driveway completely. This is the most expensive option, because you will be paying to have the old driveway removed and a new driveway installed. This is of course the most expensive option, but a paved driveway has a lifespan.
What is resurfacing a driveway?
Resurfacing is the middle ground of driveway repair. It’s also known as asphalt overlay. In many cases, this can repair significant asphalt cracks. Existing asphalt is covered with a new layer of asphalt, in a process similar to the original driveway.
Why does asphalt crack?
Over time, the heat from the sun’s rays will begin to break down the materials in the asphalt and remove moisture. As the asphalt weakens due to the sun, cracks begin to form.
How long can you drive on a driveway after it's installed?
You won’t be able to drive on our driveway for 3-5 days after it’s installed. You’ll need to avoid parking on the driveway for the first 14 days, particularly in the hot part of the day.
What is the cheapest driveway?
A gravel driveway is the cheapest option if you need a new driveway, at $1-3 per sq ft. It matches with any style of home. Classic gray gravel is well suited to a winding country drive. White gravel provides a modern look.
How much does it cost to build a driveway?
The cost to build a driveway ranges from $600 to $18,000, depending on the material. The cheapest driveways cost $1 to $3 per square foot for gravel, while standard concrete and asphalt driveways cost $3 to $8 per square foot.
How much does it cost to install a concrete driveway?
Concrete driveway. Installing a concrete driveway costs $2,400 to $4,800 on average or $4 to $8 per square foot for plain gray concrete. Adding decorative colors, borders, stamped patterns, and finishes costs $8 to $18 per square foot. Concrete lasts 30 to 40 years and handles hot climates better than asphalt.
How long does a concrete driveway last?
Asphalt driveways last 15 to 30 years, and concrete driveways last 30 to 40 years on average, depending on the climate and usage. Brick and stone pavers last 25 to 50 years. A cobblestone or gravel driveway lasts up to 100 years if well-maintained.
What is the cheapest driveway material?
The cheapest driveway material is gravel at $1 to $3 per square foot using aggregate made of crushed shells, crushed concrete or asphalt, or pea gravel . Tar and chip seal driveways are the second cheapest at $2 to $5 per square foot.
How much does gravel cost?
Well-built gravel driveways require light raking and new gravel once or twice a year. Gravel prices range from $10 to $50 per ton, depending on the stone size and type.
How much does an exposed aggregate driveway cost?
Exposed aggregate or pebble finish driveways cost $5 to $11 per square foot or $3,000 to $6,600 on average. Exposed aggregate features stones mixed into concrete or seeded on the surface. Natural aggregates provide a textured, nonskid surface in various colors, including pastels, earth tones, and deep reds and blues.
How much does a chip seal driveway cost?
Chip seal driveways cost $1,200 to $3,000 or $2 to $5 per square foot. Chip seal, also called tar and chip, lasts 7 to 10 years. Tar and chip driveways have the durability of blacktop, come in various colors, and feature layers of stone aggregate spread over hot liquid asphalt.
How Much Does an Asphalt Driveway Cost?
The average cost for an asphalt driveway is $4,996, but that will vary depending on several factors, including the size of your driveway, how deep of a layer of asphalt you want for your driveway, and even the type of asphalt.
Cost Estimator by Driveway Size
The size of your driveway is the biggest factor in determining the cost of your asphalt driveway. Expect to be charged at least $3,258 for an average-sized driveway at an average price. Sometimes the costs of labor will be added, sometimes they are included. Here we’ll break down the costs by square foot, ton, and labor hours.
Other Factors Affecting Cost
Your final bill for your asphalt driveway is going to depend on a lot of factors, including the depth of your asphalt layer, any decorative (stamped asphalt) or extraordinary (heated driveway) features, and the cost of substrate.
Services Often Bundled With Asphalt Driveways
Other outdoor services are often bundled with the installation of an asphalt driveway. Most of these additional services (tree removal or land grading, for example) involve preparing the land for your driveway.
Costs of a DIY Asphalt Driveway
You may be tempted to install your own asphalt driveway. Resist the temptation. This is going to be an enormous project. But if you think you’d like to DIY your asphalt driveway, we’ll outline the pros and cons as well as costs and materials required.
Conclusion
An asphalt driveway will cost you anywhere from $3,086 to $7,912, with an average cost of $4,996. Note that the price of any add-on services will increase your final bill.
About Us
LawnStarter is a startup making lawn care easy affordable and reliable. Follow this blog to stay tuned with what you need to keep your lawn in tip-top shape year-round.
How Much Does It Cost to Repair or Patch an Asphalt Driveway?
An asphalt driveway can last for 15 to 20 years. However, cracks and holes can appear over time. When they do, you’ll want to find an asphalt mix that works for your repair and the best price. You’ll also want to decide if you want to hire an asphalt pro near you or do it yourself.
How Much Does It Cost to Repair or Patch an Asphalt Driveway Near You?
Cold or hot temperatures can impact how long an asphalt driveway will last. Plus, it’s possible that UV radiation from the sun can undermine asphalt over time. If you live in an area with seasonal changes, then the price to repair and patch your asphalt driveway can vary quite a bit from the cost in more temperate climates.
What Factors Influence the Cost to Repair or Patch an Asphalt Driveway?
While asphalt is known to be fairly inexpensive, to figure out a more exact price, there are a few factors to take into account. If you are in an area with very hot or freezing temperatures or the type of asphalt solution you choose can raise or lower your total costs.
How Much Does It Cost to Repair or Patch an Asphalt Driveway Yourself?
Sometimes you can repair and patch your asphalt driveway yourself. It may be a dirty job and will take time, but you can save money when you do it yourself.
Repair or Patch an Asphalt Driveway Cost Breakdown
Asphalt is durable. However, in very cold or very hot conditions, even asphalt can break down, and surface-level damage, like cracks and potholes, can appear. For small potholes and cracks—less than one-fourth inch thick—pros will typically charge anywhere from $5 to $15 per square foot .
What is a crack sealant made of?
Hot-pour sealants have an asphalt cement base that might also include rubber and other materials to allow the seal to flex in hot or cold temperatures. Asphalt emulsion sealants are not heated but are liquid applications that use water and an emulsifying agent to allow the asphalt and water to mix.
How often should an asphalt driveway be seal coated? At what cost?
To maintain your asphalt driveway, pros at the Asphalt Institute agree that a seal coat should be applied every 4 to 5 years. Pricing varies, but you will pay about $.08 to $.16 per square foot from start to finish.