Cost to resurface asphalt driveway
| Size | Average cost |
| 10'x20' Driveway (1-car) | $200 – $750 |
| 12'x24' Driveway (1-car) | $300 – $1,100 |
| 20'x20' Driveway (2-car) | $400 – $1,500 |
| 24'x24' Driveway (2-car) | $550 – $2,200 |
How much does it cost to repair an asphalt driveway?
Repairing your asphalt driveway tends to cost between $800 and $2,500, depending on the same factors mentioned above. The national cost average for this project is about $1,500. Several special considerations apply, especially compared to concrete driveways.
How much will it cost to resurface my asphalt pavement?
How much will it cost to resurface my asphalt pavement? Cost to Resurface Asphalt Driveways Resurfacing costs approximately $2.25 per square foot. Patterns and colors cost more—around $4 to $8 per square foot.
How much does paving an asphalt driveway cost?
To know how much the asphalt paving of a driveway costs, two things need to be considered: the area to be covered and the quality of the material. The price of asphalt generally ranges between $ 4 and $ 12 per square foot. Paving a concrete driveway is a bit more expensive than asphalt.
How do you replace asphalt driveway?
- Demolition of an existing pavement
- Grading and sloping the ground
- Installation of the sub base to provide a stable surface
- Tack coating the sub base to create a solid bond between the incoming asphalt layer and the sub base
- Laying and compacting of asphalt
Should I resurface or replace my asphalt driveway?
Resurfacing is best for driveways that are aging or have more than 25% of the surface covered in light to moderate damage. If you resurface the entire driveway, it will look brand new. Replacing the driveway is necessary if your driveway has large potholes or several cracks wider than 1/4-inch.
Can I put new asphalt over old asphalt?
An overlay or resurface can be used on an asphalt driveway, parking lot, or road way. It consists of installing a new layer of asphalt over the existing asphalt and grinding at the transitions (i.e. sidewalks, garages, drains, curbs, or other asphalt points).
How long will an asphalt overlay last?
about 10-15 yearsIf an overlay is desired, there has to be an expectation of the customer that this method is not as long-lasting as a full removal and replacement. A 15-20 year life on a removal and replacement is common, whereas an overlay may last a shorter time, about 10-15 years. Again, this will vary with soil type.
How often should an asphalt driveway be resurfaced?
every 3-5 yearsThe short answer is that you should reseal your driveway every 3-5 years. After that many years, your driveway starts to show significant cracks that will fill with water and destroy the driveway over time. Resealing the driveway adds a thin layer of asphalt onto the topmost layer, sealing any cracks beneath it.
Is asphalt overlay a good idea?
An Asphalt Overlay Only Fixes Surface Issues A typical layer of asphalt is 1.5 inches thick. However, a new layer of asphalt won't do you much good if the surface beneath it has problems. If your driveway currently has cracks, dings, or other signs of asphalt damage, those cracks and dings will eventually reappear.
Can you blacktop over cracked blacktop?
It's also known as resurfacing. The existing layers are used as a base and a new layer of asphalt is applied to the surface. Even though the top layer of a driveway may have a worn and cracked appearance it may still have structural integrity beneath. If a solid base remains then an overlay might be the way to go.
How thick is an asphalt overlay?
1.5 inches thickA conventional overlay is at least 1.5 inches thick, while a thin overlay is less than 1.5 inches thick.
What is considered asphalt overlay?
An asphalt overlay is, essentially, a patch job done on a stretch of asphalt. This is the usual method when asphalt is showing some cracking or potholing, while still not being damaged enough to need replacement.
How is asphalt overlay done?
How is an asphalt overlay constructed? This depends on the project, but usually the first process involves milling. A machine known as an asphaltic mill will “shave” the top of an asphalt surface down to enable the new asphalt to match existing asphalt, curb and gutter, sidewalks, or concrete pads.
What is the cheapest way to resurface a drive?
How much will my new driveway cost? The cost of a new driveway will depend on the groundwork and the material chosen. Generally, gravel is the cheapest material, with resin and concrete being the most expensive.
How do you fix crumbling asphalt driveway?
Use asphalt paste patch that contains fine aggregate to fill small holes and gaps along curbing. Mound the repair above the surface the way crews do on roads. They let car tires reduce the speed bumps and gradually compact the mix. You can use a heavy metal tamper, or the end of a 2-by-4 to pound the patch nearly flat.
Is sealing a driveway worth it?
Yes, it is a necessity as you need to protect your valuable asset. If you want your driveway to last, seal coating is the way to go. Unprotected asphalt leads to cracks and potholes that can severely damage your foundation.
Driveway Repaving Prices
Here are the prices you can expect to pay for materials used in a driveway repaving, depending on what you want to use:
Driveway Repaving Installation Cost
This job has two phases of labor costs. The first is the demolition phase when the old driveway is broken up and removed, and the second phase is the installation of the new driveway in the footprint of the old driveway (or in a completely new location if so desired).
Driveway Repaving Cost by Square Foot
Generally, you can expect to pay between $6 and $22 per square foot to repave a driveway. This includes both the demolition of the old driveway and the installation of a new asphalt driveway.
Driveway Repaving Cost Factors
As you can see, there's a wide range of costs for repaving driveways. That's because a lot of factors go into this project that will affect the price tag.
Cost to Repave a Driveway Yourself
This is generally not something you want to do yourself. However, if you did have the experience with this project, and you had all of the heavy equipment needed to do it, you could complete the project for significantly less than if you contracted it out since much of the costs come from labor.
DIY vs. Hire a Driveway Paving Contractor
We'll be upfront about this one: This is not a job you should attempt on your own. Many projects are great for DIYers; this is not one of them. Driveway paving requires heavy equipment and is backbreaking work.
FAQs
It's perfectly fine to pave over an existing driveway if you just want to give it a new surface. In fact, an asphalt surface that is already there is the best base for a new asphalt surface. You'll need to coat the existing surface to ensure that the new asphalt adheres, but it is a great cost-effective option compared to repaving.
How much does it cost to resurface an asphalt driveway?
Stamping, patterns, or colored asphalt resurfacing costs $3 to $8 per square foot. The average cost to resurface an asphalt driveway is $400 to $1,800, depending on the blacktop size and condition.
How much does it cost to remove asphalt?
Removing or milling the top layer of asphalt costs $0.25 to $0.75 per square foot. Milling before resurfacing creates a uniform pavement depth in severely damaged asphalt. Milling also levels new paving with the surrounding apron, sidewalk, and garage transitions.
How much does stamped asphalt cost?
Colored or stamped asphalt overlays cost $3 to $8 per square foot total. Stamped asphalt mimics the look of stone or brick pavers. After resurfacing, contractors compact a wire template onto the hot asphalt. Coloring is either a surface coating or colored-rock paving additive.
How much does it cost to resurface a parking lot?
The average cost to resurface a parking lot is $1 to $3 per square foot or $300 to $900 per parking space. The average parking space needs 300 square feet to include room for the stall, lanes, entrances, and exits. Additional fees for inspections and permits vary by city.
How much does it cost to install a gravel driveway?
A gravel driveway costs $1 to $3 per square foot or $600 to $1,800 for a 24×24 (2-car) driveway. Installing gravel is easier and typically includes minor grading and leveling. Return to Top.
How long does asphalt last?
Asphalt resurfacing lasts 8 to 15 years on average. However, a newly reconstructed asphalt pavement lasts between 20 and 30 years with proper maintenance. Resurfacing is only a long-lasting solution when the original pavement foundation is strong.
How Much Does It Cost to Repair or Patch an Asphalt Driveway?
An asphalt driveway can last for 15 to 20 years. However, cracks and holes can appear over time. When they do, you’ll want to find an asphalt mix that works for your repair and the best price. You’ll also want to decide if you want to hire an asphalt pro near you or do it yourself.
How Much Does It Cost to Repair or Patch an Asphalt Driveway Near You?
Cold or hot temperatures can impact how long an asphalt driveway will last. Plus, it’s possible that UV radiation from the sun can undermine asphalt over time. If you live in an area with seasonal changes, then the price to repair and patch your asphalt driveway can vary quite a bit from the cost in more temperate climates.
What Factors Influence the Cost to Repair or Patch an Asphalt Driveway?
While asphalt is known to be fairly inexpensive, to figure out a more exact price, there are a few factors to take into account. If you are in an area with very hot or freezing temperatures or the type of asphalt solution you choose can raise or lower your total costs.
How Much Does It Cost to Repair or Patch an Asphalt Driveway Yourself?
Sometimes you can repair and patch your asphalt driveway yourself. It may be a dirty job and will take time, but you can save money when you do it yourself.
Repair or Patch an Asphalt Driveway Cost Breakdown
Asphalt is durable. However, in very cold or very hot conditions, even asphalt can break down, and surface-level damage, like cracks and potholes, can appear. For small potholes and cracks—less than one-fourth inch thick—pros will typically charge anywhere from $5 to $15 per square foot .
What is a crack sealant made of?
Hot-pour sealants have an asphalt cement base that might also include rubber and other materials to allow the seal to flex in hot or cold temperatures. Asphalt emulsion sealants are not heated but are liquid applications that use water and an emulsifying agent to allow the asphalt and water to mix.
How often should an asphalt driveway be seal coated? At what cost?
To maintain your asphalt driveway, pros at the Asphalt Institute agree that a seal coat should be applied every 4 to 5 years. Pricing varies, but you will pay about $.08 to $.16 per square foot from start to finish.
How much does it cost to resurface a driveway?
Cost of Resurfacing a Driveway. Resurfacing a driveway usually costs anywhere between $1 to $2 per square foot. The price varies based on various factors such as your location, local competition, season in which you are opting for resurfacing and the condition of your driveway.
How much does it cost to resurface a 5,000 square foot driveway?
So the cost to resurface a 5,000 square foot driveway would be anywhere from $5,000 to $10,000. Cost of Repaving a Driveway. Repaving is more expensive than resurfacing because the repaving is much more labor intensive, requires more materials and time.
What is resurfacing a driveway?
What is Resurfacing? Resurfacing is a process of re-coating or putting a new layer on top of old driveway. Compared to repaving, resurfacing is a faster and simpler process to have a new driveway. Essentially, you’re just putting a new asphalt driveway over the old one.
How long does a driveway last?
Properly installed asphalt paved driveways have a life expectancy of about thirty or more years.
Why does my driveway crack?
Even with regular repairs and sealing, the smooth surface will eventually develop cracks and wear down due to several external factors such as damage from UV rays, salt, oil, gas and harsh weather.
Can you resurface a cracked driveway?
It is not a solution when your driveway needs repairing. As a general rule, resurfacing is a good way to go if about 25 percent of your driveway is cracked. Less than that and you can probably wait a while. If the damage is significantly worse, it’s time to think about repaving.
How much does an asphalt driveway cost per square foot?
At $13 per square foot, curbs run more because of extra labor and a higher average thickness for the material. The width of the average residential lot is 75 to 125 feet. "Provided it's installed properly, including a stable base, and is well-maintained over time, an asphalt driveway should last twenty years or longer.".
How much does it cost to pave a driveway?
Paving an asphalt driveway costs $4,746 on average, with a typical range between $2,935 and $6,567 . This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor. If you need replacement, you’ll pay $8 to $15 per square foot. Although driveways are the most common use of asphalt in the home, other applications include:
How much does it cost to seal asphalt?
Stamped or colored asphalt costs $12 to $17 per square foot for the entire surface. If you only need the top coat, you’ll pay $5 to $10 per square foot. Asphalt in a unique shape or color adds interest to your property. In most cases, you’ll want to seal it to keep it in good condition for longer.
How much does asphalt overlay cost?
Asphalt Overlay Cost. Asphalt overlay costs $3 to $7 per square foot for standard materials. This project, often called a “top coat,” runs less because it involves a thinner layer on top of an existing surface. Asphalt sealant costs about $500, and should be done at least 6 months after the top coat.
How much does it cost to pave a 100 foot path?
Paving a 100-foot asphalt path costs $1,750 to $3,250. The average pathway is about 30 inches wide. Designs with complicated curves increase the total because they add to the square footage.
How much does reclaimed asphalt cost?
Recycled or Reclaimed Asphalt. Recycled or reclaimed asphalt costs $10 to $20 per ton, compared to $100 to $200 per ton for new. This can save you $675 to $1,350 on materials for a driveway, if it’s available in your area.
How many square feet does a ton of asphalt cover?
One ton usually covers 40 to 80 square feet. The amount you need depends on the thickness of the layers: 2 inches thick: 80 square feet per ton. 4 inches thick: 40 square feet per ton. For the average driveway, you’ll need 7.5 to 15 tons. "The complexity of the job itself weighs heavily on the price of an asphalt job.
How much does it cost to repair a concrete driveway?
Fixing holes, cracks, and spalling is required before sealing concrete. Concrete driveway repair costs $3 to $8 per square foot on average.
How much does asphalt driveway sealer cost?
Asphalt driveway sealer alone costs between $0.06–$0.11 per square foot on average, while additional modifiers or colors may add another $0.60 per square foot. Coverage rate also depends on the condition and texture of the asphalt. The sealer can also be mixed with sand, which helps add traction back to an asphalt surface.
How much does it cost to seal a 20x24 driveway?
The average cost to seal a 20′x24′ two-car driveway is between $100 and $190 depending upon the extent of cracks and holes, the size and layout of your driveway, and the type of sealer used. Contractors typically charge a minimum fee of $100 to $200 regardless of project size and add 50% more to your total cost if two coats are required.
How much does it cost to seal a 1,000 square foot driveway?
For a larger 1,000 square foot driveway, contractors typically charge between $170 and $240 for sealcoating. Prices depend on whether you get one or two coats and most will charge a minimum fee of $100 to $200 for the project. Blacktop driveway sealer not only helps protect it from natural elements, machine leaks, and other spills, ...
How much does it cost to seal asphalt?
In the United States, the average cost for materials and labor to sealcoat asphalt is $0.17 to $0.24 per square foot. For a basic 480 square foot driveway, you can expect to pay $80 to $115 for sealing. For a larger 1,000 square foot driveway, contractors typically charge between $170 and $240 for sealcoating.
How many square feet is a 2 car driveway?
The average two-car driveway is between 480 and 650 square feet which will help calculate the cost. Depending on the current condition and age of your driveway, you may pay extra for patching holes or other common repairs.
Why was asphalt sealer created?
Created because of the diminishing availability of coal. An asphalt sealer. Quality depends on the type of crude oil used in its manufacturing process and the refinery’s preferred method of blending.