Asphalt Driveway Removal Cost Examples
| State | City | Project Description | Project Cost |
| Minnesota | Richfield | Demolition of 1,600 sq ft asphalt drivew ... | $1,600 |
| North Carolina | Greensboro | Demolition of 1,000 sq ft asphalt drivew ... | $1,800 |
| Ohio | University Heights | Demolition of 1,400 sq ft asphalt drivew ... | $3,500 |
How much does it cost to replace an asphalt driveway?
Asphalt Driveway Replacement vs. Resurfacing. Asphalt resurfacing costs $3 to $7 per square foot compared to $8 to $15 per square foot for replacing.The ideal choice depends on the condition of your existing driveway. If your driveway is in relatively good condition with no potholes, resurfacing can save you $5 to $8 per square foot.If it’s more than 15 years old or in poor shape ...
How to resurface your asphalt driveway?
Stock up on these supplies before you get started:
- Utility Broom
- Coater Brush
- Leaf Blower
- Garden Hose or Pressure Washer
- Putty Knife
- Mixing Tool
- Crack Filler
- Degreaser
- Paint Brush
- Tamper
How do you replace asphalt driveway?
- Demolition of an existing pavement
- Grading and sloping the ground
- Installation of the sub base to provide a stable surface
- Tack coating the sub base to create a solid bond between the incoming asphalt layer and the sub base
- Laying and compacting of asphalt
How much does it cost to clean a driveway?
How Much Does Driveway Pressure Washing Cost?
- Average Cost of Driveway Pressure Washing or Cleaning. The average cost for pressure washing a driveway, sidewalk or walkway is around .32 cents per square foot, or $290 for an ...
- Overview of Driveway Pressure Washing. Pressure washing takes power washing to the next level. ...
- Cost Breakdown. ...
- Permits, Inspection, and Labor Costs. ...
- DIY or Hire a Pro. ...
How much does it cost to cut out asphalt?
Asphalt removal costs roughly $1-$3 per square foot on average, including debris disposal. The cost to demolish the average asphalt driveway and remove the debris is between $1,000 and $3,000.
Is it better to remove old asphalt?
When your asphalt starts developing cracks, the foundation is no longer resilient and as thick as it should be; therefore, it needs to be completely taken out and replaced with a new base. Redoing your damaged base guarantees that the new asphalt driveway will remain strong for years to come.
How do you remove asphalt driveway?
Removal. Asphalt driveway removal can be accomplished using a jackhammer to break up the asphalt or even a circular saw to cut the driveway into small pieces. The best way to remove asphalt, however, is with a larger piece of equipment, such as a Caterpillar 303 excavator from a rental center.
Should I resurface or replace my asphalt driveway?
Resurfacing is best for driveways that are aging or have more than 25% of the surface covered in light to moderate damage. If you resurface the entire driveway, it will look brand new. Replacing the driveway is necessary if your driveway has large potholes or several cracks wider than 1/4-inch.
Can you concrete over asphalt driveway?
Yes, you can pour concrete over an asphalt driveway. While asphalt provides a poor bond with concrete, it does serve as an excellent base as it is solid, stable, and very strong. Provided the asphalt is in decent condition, there is no reason you can't pour concrete over the top.
Can you pave over an old asphalt driveway?
Once the asphalt surface has reached the end of its lifespan, many wonder if it's time for a new surface entirely or if the old surface can be paved over. Both are options. The layer of asphalt over the original is called an overlay and can offer an additional 10-15 years to the life of the surface.
Is it hard to break up asphalt?
Because of its durability, breaking up asphalt is a very large undertaking. Asphalt is very heavy and requires a great deal of physical strength to remove it. If you're not willing to spend hours of hard labor on this project, call a paving company skilled in demolition.
Can you dig up asphalt?
Digging up asphalt by hand is a daunting and time-consuming job, but it can be done with the proper tools. If you are removing asphalt from a large driveway, you can save the cost of a contractor if you have the skill to operate a small tractor and a dump truck.
How do you dig up asphalt?
To make long, straight cuts, it's most effective to use a circular saw equipped with a diamond blade. For shorter cuts or cuts that aren't straight, the easiest way to do it is by using an electric chipping hammer to cut away the parts of the asphalt that you want to remove.
What is the lifespan of asphalt?
Asphalt roads are likely to last approximately 18 years. Actual outcomes, however, depend on more than performance characteristics of concrete vs. asphalt. When estimating road life, we need to consider additional factors.
How do you fix crumbling asphalt driveway?
Use asphalt paste patch that contains fine aggregate to fill small holes and gaps along curbing. Mound the repair above the surface the way crews do on roads. They let car tires reduce the speed bumps and gradually compact the mix. You can use a heavy metal tamper, or the end of a 2-by-4 to pound the patch nearly flat.
What is the cheapest way to resurface a drive?
How much will my new driveway cost? The cost of a new driveway will depend on the groundwork and the material chosen. Generally, gravel is the cheapest material, with resin and concrete being the most expensive.
How do you break up old asphalt?
If you're working with tools:Jackhammer – a vertical handheld tool that breaks up your driveway.Electric chipping hammer – a mechanical hammer that chips away stubborn, sticky pieces of asphalt.Circular Saw – a mechanical saw that cuts asphalt into pieces.More items...•
What is the lifespan of asphalt?
Asphalt roads are likely to last approximately 18 years. Actual outcomes, however, depend on more than performance characteristics of concrete vs. asphalt. When estimating road life, we need to consider additional factors.
How do you destroy asphalt?
Four Substances that Can Destroy Your Asphalt SurfacesHave you recently paved an asphalt driveway, sidewalk, or parking lot? Asphalt is a great paving substance that offers durability, low maintenance, and an attractive finishing to your roads or driveways. ... Heavy Traffic. ... Sunlight. ... Surface Water. ... Gasoline.
How long does asphalt Last compared to concrete?
Lifespan and Durability Overall, asphalt is less durable than concrete. With proper maintenance, it can last 30 years. Alternatively, concrete provides a sturdy, long-lasting option and can last homeowners 50+ years with occasional repairs and degreasing.
How much does a short driveway cost?
A short driveway (10x20 to 12x25 feet) might run $500-$1,000 or more, depending on total size and the thickness of the asphalt and the gravel base. At least two business days before any digging, call 811 (the free national Call Before You Dig service) to have utility companies mark any underground lines on your property.
How much does it cost to rent a concrete saw?
If removing only part of the asphalt and needing to leave a straight line, renting a concrete saw should be about $30-$50 (plus possibly another $25-$125 for wear on a diamond-tipped blade). For large projects, renting a small backhoe or skid-steer (also called a bobcat) with a breaker attachment can be $150-$350 a day.
How thick should asphalt be?
Although good asphalt paving should be 3-4 inches thick on a 4-6 inch gravel base, residential asphalt may have been installed only an inch or two thick, with little or no base under it -- which makes removal easier.
Can you remove old asphalt?
For larger projects requiring heavy machinery, most excavation or paving contractors also remove old asphalt. Asphalt companies often have equipment specifically designed to rip out old asphalt, although typically they do this as part of a replacement project.
How much does it cost to remove asphalt?
Asphalt removal costs roughly $1-$3 per square foot on average, including debris disposal. The cost to demolish the average asphalt driveway and remove the debris is between $1,000 and $3,000. However, just with any type of asphalt or concrete removal, there are a number of factors that will affect the cost of your specific project, ...
How much does it cost to remove a concrete sidewalk?
The average cost to remove a concrete sidewalk is around $1,000, ranging anywhere from $500-$2,000 or more in some cases. However, your exact concrete sidewalk removal cost will depend on the length, width, and depth of the sidewalk, the location and accessibility of the sidewalk, and who you hire to remove it.
How much does it cost to demolish a concrete patio?
The average concrete patio is 100-300 sq ft, so the cost to demolish the average patio and remove the debris is $300-$1,800. However, as previously mentioned, there are a number of factors that will affect the cost of your project.
How much does it cost to repave an asphalt driveway?
The average cost to repave an asphalt driveway is $4 to $10 per square foot with a new gravel base or $3 to $7 per square foot with an existing base. Repaving a 2-car (20’x20’) asphalt driveway costs $1,600 to $4,000 on average. Repaving includes removing and hauling away the existing asphalt.
How much does it cost to lay asphalt over concrete?
Laying new asphalt over a concrete driveway costs $1 to $3 per square foot. Contractors fill cracks with concrete-repair caulk before paving. Resurfacing concrete with asphalt is cheaper than replacing concrete. However, special preparation is required to stabilize the concrete and prevent cracks.
How thick should a driveway be?
A new residential driveway needs 3 to 5 inches of asphalt over 4 to 8 inches of rock-base foundation to withstand temperature changes and last 20+ years. Some companies recommend a 2" thickness to save $0.50 to $1 per square foot, but won't provide a warranty due to deterioration risks.
How long does asphalt last?
An asphalt driveway lasts 15 to 30 years and requires sealcoating every 3 to 5 years. Boosts curb appeal and resale value. A new asphalt driveway needs an asphalt layer 3" to 5" thick to last. Resurfacing only the top layer or asphalt overlay costs $1 to $3 per square foot.
How much does stamped asphalt cost?
Colored or stamped asphalt costs $5 to $15 per square foot for a new driveway or replacement, or $3 to $8 per square foot for resurfacing the top layer. A 20x20 stamped asphalt driveway costs $2,400 to $6,000. Decorative patterns are sealcoated, which colors and protects the surface.
How much does it cost to pave a road?
Cost to pave an asphalt road. The average cost to pave a private one-lane asphalt road is $35 to $85 per linear foot. Paving a two-lane (24'-wide) asphalt road costs $70 to $170 per linear foot or $370,000 to $900,000 per mile. Blacktop road construction costs more than driveways because roads need 5" to 11" thick asphalt.
How much does it cost to install asphalt curbs?
Asphalt curbing costs $3 to $6 per linear foot to install. Adding asphalt curbing to a 400-square-foot driveway costs $120 to $240. Repairing or replacing asphalt curbs costs $8 to $15 per linear foot on average. Total costs depend on curb thickness, styles, and labor.
Asphalt Driveway and the Best Practices
The Following are industry suggested building standards (some are also state code requirements) for long life performance of a residential asphalt driveway:
Costs to Install a New Asphalt Driveway
The costs to install a new asphalt driveway depends on size of driveway, how easy the access is for large equipment, how much land preparation has to be done (tree removal and grading), Also, the soil base might need additives to become stronger, the depth of gravel subbase and the depth of the asphalt layers.
Resurfacing your Asphalt Driveway
Asphalt driveway Resurfacing or overlay is a way of repairing an existing driveway by paving over-top of it. There are certain preparations for constructing an overlay which include milling or shaving the original pavement into a more even surface to match the existing landscaping around it including fitting it to the garage apron and sidewalks.
Costs to Resurface an Asphalt Driveway
A lot of factors are involved in the cost to resurface an asphalt driveway, such as the volume of removal and patching of broken pavement, size of driveway and how many transitions from blacktop to the concrete of a garage apron and the sidewalk leading to the home.
Asphalt Driveway Replacement and Removal
Resurfacing an old broken asphalt driveway may seem like a cure all but you might just be sending yourself into an endless cycle of repairs to the same locations. Patching some areas down through the subbase may fix some of the smaller failed areas but is not practical for multiple problems.
Removal of the Asphalt Driveway before Replacement
When the asphalt layer is deeper than three inches, heavy operating equipment will be needed in its removal. It is not a very practical solution to get some handy man or even yourself to do the removal.
How much does recycled asphalt cost?
Recycled asphalt costs between $10 to $20 per ton, compared to $100 to $200 per ton for brand-new asphalt. Using recycled asphalt can save you $675 to $1,350 on driveway materials if it’s available in your area. Sometimes an installer can mill the old material onsite, cutting down on transporting supplies to your home.
How much does asphalt cost per ton?
It costs between $100 to $200 per ton. Cold mix asphalt costs $10 to $50 per bag, but it can be used only for temporary repairs. Cold mix shouldn’t be used for a whole driveway because it doesn’t last more than one or two seasons. Advertisement.
How long does an asphalt driveway last?
Most asphalt driveways last up to 20 years. If your driveway is past its prime and showing its age, it’s time for a replacement. To completely resolve asphalt driveway issues, a replacement is the way to go.
How much does it cost to seal asphalt?
Asphalt sealing typically costs $3 to $7 per square foot. This top coat costs less because it’s a thin layer on top of an existing surface. Asphalt sealant costs about $500 and should be done at least 6 months after the top coat. It provides a layer of protection to avoid cracking and environmental damage. An asphalt driveway requires regular maintenance, and sealing is recommended every 3 to 5 years. Any cracks or fissures should be patched up and remedied immediately.
How many square feet does a ton of concrete cover?
One ton can cover about 40 to 80 square feet, and the total amount needed depends on the thickness of the layers. A driveway 2 inches thick can run 80 square feet per ton, and a 4-inch-thick driveway can run 40 square feet per ton. An average driveway will need 7.5 to 15 tons.
How much does a heated driveway cost?
A heated driveway usually costs $12 to $25 per square foot, depending on whether it’s new or a replacement. For the average home, the cost will be between $7,200 to $15,000.
How much does it cost to excavate a driveway?
Excavating land can cost between $1,500 to $5,100, depending on the number of cubic feet that needs to be moved. Grading, or leveling the area to make your driveway smooth and well-drained, costs between $5 and $10 per square foot for professional graders, but steep driveways may cost more.
What is the most expensive option to have a driveway removed?
Repaving. Repaving your driveway requires removing the old driveway completely. This is the most expensive option, because you will be paying to have the old driveway removed and a new driveway installed. This is of course the most expensive option, but a paved driveway has a lifespan.
How much does it cost to install asphalt?
Asphalt paving material usually costs $40-80 a ton. One ton will cover 30 to 80 square feet. A residential driveway averages 9-24 square feet. Other materials are needed for asphalt driveway installation as well, and will affect the final cost.
What is resurfacing a driveway?
Resurfacing is the middle ground of driveway repair. It’s also known as asphalt overlay. In many cases, this can repair significant asphalt cracks. Existing asphalt is covered with a new layer of asphalt, in a process similar to the original driveway.
Why does asphalt crack?
Over time, the heat from the sun’s rays will begin to break down the materials in the asphalt and remove moisture. As the asphalt weakens due to the sun, cracks begin to form.
How much does a paver driveway cost?
They offer a wide variety of designs, shapes, sizes, and colors. A paver driveway will cost between $13-15 per square foot. A poured concrete driveway ranges from $7-9 per sq ft.
How long can you drive on a driveway after it's installed?
You won’t be able to drive on our driveway for 3-5 days after it’s installed. You’ll need to avoid parking on the driveway for the first 14 days, particularly in the hot part of the day.
What is the cheapest driveway?
A gravel driveway is the cheapest option if you need a new driveway, at $1-3 per sq ft. It matches with any style of home. Classic gray gravel is well suited to a winding country drive. White gravel provides a modern look.
Can Hunker remove driveway?
Hunker may earn compensation through affiliate links in this story. Removing an asphalt driveway is a tough job that might cost you a lot of money if you decide to hire a professional. You can remove the driveway yourself--and you can make this tough job much easier--with the right equipment and some patience.
Can excavator buckets smash asphalt?
Advertisement. The excavator bucket can smash large asphalt chunks into smaller, more manageable pieces. Moving as much of the asphalt as possible into piles near shaded areas, or putting tarp over the asphalt, makes breaking up the asphalt into even smaller pieces with a pick ax or jackhammer an easier and cooler task. ...