Asphalt driveway paving cost
| Size | Square feet | Average cost |
| 10’x20’ Driveway (1-car) | 200 | $600 – $1,400 |
| 12’x24’ Driveway (1-car) | 288 | $850 – $2,000 |
| 20’x20’ Driveway (2-car) | 400 | $1,200 – $2,800 |
| 24’x24’ Driveway (2-car) | 576 | $1,700 – $4,000 |
How much does it cost to build an asphalt driveway?
The price can rise or fall depending on many factors including location, quality of material, depth of material required, and the size of your drive. Asphalt driveway installation pricing across the country can be anywhere from $1,500 to $10,000, but most spend $4,000 to $8,000.
How expensive is asphalt driveway?
An asphalt driveway is made from sand, rock, and asphalt cement. The standard is a deep smooth black, but you can add designs to asphalt as well. It does require occasional maintenance, but it’s less prone to cracking than concrete. It costs $2-5 per square foot. Its low cost makes it a budget-friendly option for driveways of all sizes.
How much to asphalt a driveway?
The cost to pave an asphalt driveway involves both materials and labor. On the labor side, the average price for asphalt installation is $5 to $7 per square foot. Your rate may be higher if the driveway is located in the backyard or if you're working on steep terrain.
How much to replace an asphalt driveway?
- Permits, which range from $50 to $500.
- City rules concerning driveway length.
- Whether you’ll need to replace sidewalks or curbs afterward.
Which is cheaper a concrete or an asphalt driveway?
The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.
How do you calculate the cost of an asphalt driveway?
For the simplest estimate, you can use this formula.Length x width=Square footage of the driveway.Driveway sq ft x $3= low end cost.Driveway sq ft x 7= high end cost.Driveway sq ft x $2= low end cost.Driveway sq ft x $4= high end cost.When to reseal your driveway:When to repave your driveway:
Is asphalt the same as blacktop?
Blacktop is heated to approximately 150 degrees celsius, whereas asphalt is only heated to 120 degrees celsius. Asphalt is has a higher bitumen content and for that reason is less porous and more resilient to wear and tear from high traffic and thus is the preferred choice for major highways.
Can I asphalt my driveway myself?
The process of paving with asphalt is not difficult, but proper asphalt installation requires heavy equipment that most homeowners do not possess. You might not be able to install asphalt by yourself, but understanding the operation will allow you to ensure that your hired contractor is doing it correctly.
How much is a 700 ft driveway?
For a larger driveway or thicker base, the cost will be higher. For example, a driveway 15 feet wide by 700 feet long with a six inch base will need approximately 25 tons of gravel, at a material cost of about $700. With delivery, the total cost will be around $1000.
How thick should a asphalt driveway be?
2 to 3 inchesResidential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate.
Are there different grades of asphalt for driveway?
There are three different grades available in asphalt. The grades available are I-2, also known as base; I-5, known as top ;and the I-4 or commercial top grades. The difference in the tree grades are that the I-2 or base consists of ¾ inches of stone. The base grade is generally used in corn stabilizing level.
What temperature is best for laying asphalt?
The best time of year to pave asphalt is during the spring and summer months because the best temperature for hot paving is generally 70 degrees Fahrenheit or higher. It's possible to lay asphalt at temperatures as low as 50 degrees, but doing so isn't likely to bring about the best results possible.
Will rain hurt a new asphalt driveway?
When rain comes into contact with fresh asphalt, it causes the oil to rise to the surface which can affect the curing time and the finished product. If asphalt is paved while it's raining, it can reduce the overall quality of the asphalt. Rain also jeopardizes the stability of the subsoil.
Can you pour asphalt over gravel?
An inexpensive method for paving a driveway consists of gravel or crushed rock over a graded, packed dirt bed. If you already have a gravel driveway and want to pave over it, the least expensive option is adding a hot-asphalt seal-coat layer over the surface of the gravel, followed by a layer of crushed rock.
Can you put asphalt over dirt?
Asphalt. Asphalt is still one of the more common driveway overlays, even over dirt. While it usually requires professional installation, it provides a durable, level driveway surface, even on grades. Unlike gravel or RAP, it cannot be laid directly to dirt surfaces.
What is the best base for asphalt driveway?
crushed angular gravelStrong blacktop driveways are typically built using crushed angular gravel as a base. This gravel needs to be a minimum of 6 inches thick for light vehicle traffic such as cars and pickup trucks.
How Much Does an Asphalt Driveway Cost?
The average cost for an asphalt driveway is $4,996, but that will vary depending on several factors, including the size of your driveway, how deep of a layer of asphalt you want for your driveway, and even the type of asphalt.
Cost Estimator by Driveway Size
The size of your driveway is the biggest factor in determining the cost of your asphalt driveway. Expect to be charged at least $3,258 for an average-sized driveway at an average price. Sometimes the costs of labor will be added, sometimes they are included. Here we’ll break down the costs by square foot, ton, and labor hours.
Other Factors Affecting Cost
Your final bill for your asphalt driveway is going to depend on a lot of factors, including the depth of your asphalt layer, any decorative (stamped asphalt) or extraordinary (heated driveway) features, and the cost of substrate.
Services Often Bundled With Asphalt Driveways
Other outdoor services are often bundled with the installation of an asphalt driveway. Most of these additional services (tree removal or land grading, for example) involve preparing the land for your driveway.
Costs of a DIY Asphalt Driveway
You may be tempted to install your own asphalt driveway. Resist the temptation. This is going to be an enormous project. But if you think you’d like to DIY your asphalt driveway, we’ll outline the pros and cons as well as costs and materials required.
Conclusion
An asphalt driveway will cost you anywhere from $3,086 to $7,912, with an average cost of $4,996. Note that the price of any add-on services will increase your final bill.
About Us
LawnStarter is a startup making lawn care easy affordable and reliable. Follow this blog to stay tuned with what you need to keep your lawn in tip-top shape year-round.
How much does asphalt cost per ton?
It costs between $100 to $200 per ton. Cold mix asphalt costs $10 to $50 per bag, but it can be used only for temporary repairs. Cold mix shouldn’t be used for a whole driveway because it doesn’t last more than one or two seasons. Advertisement.
How much does it cost to excavate a driveway?
Excavating land can cost between $1,500 to $5,100, depending on the number of cubic feet that needs to be moved. Grading, or leveling the area to make your driveway smooth and well-drained, costs between $5 and $10 per square foot for professional graders, but steep driveways may cost more.
How long does an asphalt driveway last?
Most asphalt driveways last up to 20 years. If your driveway is past its prime and showing its age, it’s time for a replacement. To completely resolve asphalt driveway issues, a replacement is the way to go.
How much does recycled asphalt cost?
Recycled asphalt costs between $10 to $20 per ton, compared to $100 to $200 per ton for brand-new asphalt. Using recycled asphalt can save you $675 to $1,350 on driveway materials if it’s available in your area. Sometimes an installer can mill the old material onsite, cutting down on transporting supplies to your home.
How much does it cost to seal asphalt?
Asphalt sealing typically costs $3 to $7 per square foot. This top coat costs less because it’s a thin layer on top of an existing surface. Asphalt sealant costs about $500 and should be done at least 6 months after the top coat. It provides a layer of protection to avoid cracking and environmental damage. An asphalt driveway requires regular maintenance, and sealing is recommended every 3 to 5 years. Any cracks or fissures should be patched up and remedied immediately.
How many square feet does a ton of concrete cover?
One ton can cover about 40 to 80 square feet, and the total amount needed depends on the thickness of the layers. A driveway 2 inches thick can run 80 square feet per ton, and a 4-inch-thick driveway can run 40 square feet per ton. An average driveway will need 7.5 to 15 tons.
How much does a heated driveway cost?
A heated driveway usually costs $12 to $25 per square foot, depending on whether it’s new or a replacement. For the average home, the cost will be between $7,200 to $15,000.
How much does it cost to install asphalt?
Asphalt paving material usually costs $40-80 a ton. One ton will cover 30 to 80 square feet. A residential driveway averages 9-24 square feet. Other materials are needed for asphalt driveway installation as well, and will affect the final cost.
How much does a paver driveway cost?
They offer a wide variety of designs, shapes, sizes, and colors. A paver driveway will cost between $13-15 per square foot. A poured concrete driveway ranges from $7-9 per sq ft.
What is the most expensive option to have a driveway removed?
Repaving. Repaving your driveway requires removing the old driveway completely. This is the most expensive option, because you will be paying to have the old driveway removed and a new driveway installed. This is of course the most expensive option, but a paved driveway has a lifespan.
What is resurfacing a driveway?
Resurfacing is the middle ground of driveway repair. It’s also known as asphalt overlay. In many cases, this can repair significant asphalt cracks. Existing asphalt is covered with a new layer of asphalt, in a process similar to the original driveway.
Why does asphalt crack?
Over time, the heat from the sun’s rays will begin to break down the materials in the asphalt and remove moisture. As the asphalt weakens due to the sun, cracks begin to form.
How long can you drive on a driveway after it's installed?
You won’t be able to drive on our driveway for 3-5 days after it’s installed. You’ll need to avoid parking on the driveway for the first 14 days, particularly in the hot part of the day.
What is the cheapest driveway?
A gravel driveway is the cheapest option if you need a new driveway, at $1-3 per sq ft. It matches with any style of home. Classic gray gravel is well suited to a winding country drive. White gravel provides a modern look.
How much does asphalt cost per ton?
Asphalt cost per ton. Asphalt costs $40 to $80 per ton on average. Asphalt prices vary depending on the mix and material ingredients. One ton of asphalt covers 30 to 80 square feet. A 2-car driveway needs 7.5 to 18 tons of asphalt, depending on the thickness. Asphalt cost per ton by material - chart.
How much does it cost to haul asphalt?
A bulk truckload of asphalt costs $500 to $1,800, including delivery fees. Tandem trucks carry 13 to 20 tons of asphalt that cover 550 to 850 square feet with a layer 3 to 5 inches thick. Prices vary according to the asphalt-delivery distance.
How much does it cost to rent an asphalt paving machine?
Renting an asphalt paving machine costs $750 to $3,600 per day on average. Asphalt roller rental costs $120 to $700 per day for ride-on compactors 3 to 4-foot wide. Renting asphalt paving machinery sometimes requires a commercial driver’s license and additional training.
How much does a 50 lb bag of asphalt cost?
A 50 lb. bag of cold-patch asphalt costs $8 to $20 and covers 5 to 7 square feet at a 1" depth. Cold-patch asphalt is the only DIY-friendly option that cures by compaction alone.
How many tons of asphalt is in a cubic yard?
There are typically 2 tons in 1 cubic yard, depending on the mixture's density. A cubic yard covers 65 to 110 square feet with an asphalt layer 3 to 5 inches deep.
What is the difference between asphalt and blacktop?
The terms “asphalt” and “blacktop” are slightly different. Highway pavers use asphalt, which contains less stone than real blacktop. Blacktops are used for residential areas with less traffic, are easier to repair, and more durable than asphalt.
How much does it cost to replace an asphalt driveway?
Replacing an existing asphalt driveway costs $8 to $15 per square foot. The cost covers $1 to $2 per square foot for removal of the existing surface, $2 to $6 per square foot for materials, and $5 to $7 per square foot for labor.
How much does it cost to install a driveway?
A plain asphalt driveway costs between $7 and $13 per square foot, installed. You'll pay $5 to $7 per square foot for materials and $2 to $6 per square foot for labor. So, for an average 600-foot driveway, expect to pay between $4,200 and $7,800.
How thick should an asphalt driveway be?
Asphalt driveways must be at least 2 inches thick, which gives you approximately 80 square feet of coverage per ton. For a more robust driveway with greater durability and longevity, your contractor may recommend a depth of 4 or 6 inches, which reduces the coverage per ton and increases the amount you'll spend on materials.
How much does a heated driveway cost?
A heated blacktop driveway costs $12 to $25 per square foot. The costs break down to $7 to $13 per square foot for the asphalt driveway and $5 to $12 per square foot for the heating system. So, if you have a standard 600-foot driveway, a heated driveway costs between $7,200 and $15,000 installed, including the heating system.
How much does it cost to overlay asphalt on concrete?
Overlaying asphalt onto concrete costs $3 to $7 per square foot , the same as overlaying old asphalt. It's important to note that this option, while reasonably budget-friendly, isn't a long-term solution as it doesn't have the same life expectancy as a new concrete or asphalt driveway.
How many square feet does a ton of asphalt cover?
A ton covers between 30 and 80 square feet, depending on the depth of the driveway. The minimum asphalt depth for a driveway is 2 inches, and homeowners often go with a depth of up to 6 inches to enhance stability and longevity. For 2-inch depth, you’ll get 80 sq. ft. of coverage per ton.
How much does reclaimed asphalt cost?
Recycled or reclaimed asphalt is much more affordable than new asphalt, at just $10 to $20 per ton. Ask your contractor about recycling your existing asphalt, if you have any, and ask if reclaimed asphalt is available in your area.
Driveway Costs
A new driveway can add some curb appeal and more. It comes with a cost and a commitment for a few days to get the project done. A driveway costs between $1,700 to $7,000 for materials and averages $4,500. Expect to pay between $2 and $15 per square foot for materials and installation.
Driveway Cost Per Square Foot
The cost of a driveway will depend upon the condition of your current driveway, its size and the material you want to use. Gravel is the cheapest material to use at just $1 to $3 per square foot while a heated driveway is the most expensive at $12 to $18 per square foot.
Driveway Cost by Material
A gravel driveway is the cheapest way to go and it’ll last more than 100 years with regular maintenance. But it’s not attractive to every homeowner and tends to kick up dust on vehicles. Concrete driveways remain a low-cost option because they come in slightly cheaper than an asphalt driveway and often require less maintenance.
Driveway Construction Cost
Building a driveway will cost around $3 to $12 on average, depending upon the size of the driveway and the selected material. Expect to pay as much in labor as you do for materials. Labor costs can increase if the driveway needs leveling, too.
When to Build a Driveway
Depending upon your climate, summer is likely the best time to build a driveway. Plan when there are a few clear days of moderate temperatures. Installing an asphalt driveway is dirty work and you need a few days of clear skies to get it done.
Frequently Asked Questions (FAQs)
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maintenance and dust suppression.
How long does an asphalt driveway last?
That said, a concrete driveway may last 50 years or longer before drastic repairs are needed.
How much does gravel cost?
Gravel can cost as little as 50 cents per square foot. Plus, comparable materials like crushed stone, concrete and asphalt can be found in some areas. A base layer of crushed stone and some kind of edging material will help stabilize the gravel on the surface.
How often should I reseal my driveway?
For asphalt driveways, that maintenance will require surface resealing every two to five years depending on climate and level of use . The current national average for sealing asphalt ranges from 14-25 cents per square foot.
What material is used to stabilize gravel?
Plus, comparable materials like crushed stone, concrete and asphalt can be found in some areas. A base layer of crushed stone and some kind of edging material will help stabilize the gravel on the surface.
Do you need more asphalt for RV driveway?
If there are heavier vehicles, RVs or equipment being parked on the driveway, more asphalt may be needed. Proper grading and underlay work is the key to longevity, so unless you’re confident in your skills, here’s where you’ll want to consider consulting a pro.
How much does it cost to pave a driveway?
Nationwide, paving a driveway costs between $2700 and $6500. Depending on the size of your driveway and choice of materials, you could pay as little as $1200 to $12,000 or more. The average homeowner spends $4000.
How much does asphalt cost?
It costs $8.50 per square foot — $2040 for a single-car driveway and $3553 for a two-car sized drive — and is available in colors on the black-gray spectrum. The cost of materials plus labor averages $3500—$4100.
How long does a gravel driveway last?
With care, a gravel driveway can last 50 years or more before it needs a major overhaul. Gravel does have drawbacks. It’s not as hard or even as asphalt or concretion and can be a tripping hazard. It’s prone to ruts, and in cold climates, snow removal takes some of the gravel with it.
Why is my concrete driveway heaving?
The small spaces between each allow moisture to drain underneath, but in cold climates, the build-up of water and ice can cause heaving. Pros recommend using thicker, heavier slabs to keep the driveway stable. Drawbacks to concrete driveways include staining — a problem that regular cleaning solves — and cracking.
How much does it cost to repair a blacktop driveway?
Over the 15–20 year life of a blacktop driveway, repairs and maintenance cost $800–$1000. Compared to gravel, however, asphalt is solid to walk on in any footwear, including high heels. Commercial blends may be coarse or smooth. Ultra-smooth surfaces are easier to repair and maintain, but rough finishes offer traction.
Why do people put paved driveways on their homes?
A paved driveway makes your property more functional and attractive. It adds to its resale value and inspires pride. Whether you are planning to sell your home or intend to live in it for a lifetime, nothing says “welcome home” like a professionally paved driveway.
How much does concrete cost per square foot?
Concrete driveways costs slightly more than asphalt per square foot — $9.00 versus $8.50 — but it’s a favorite because it’s durable, attractive and relatively low-maintenance. Estimates for labor and materials average $3900–$6000 for a 240-square foot area.