Asphalt driveway paving cost
| Size | Square feet | Average cost |
| 10’x20’ Driveway (1-car) | 200 | $600 – $1,400 |
| 12’x24’ Driveway (1-car) | 288 | $850 – $2,000 |
| 20’x20’ Driveway (2-car) | 400 | $1,200 – $2,800 |
| 24’x24’ Driveway (2-car) | 576 | $1,700 – $4,000 |
| Driveway Material Cost Per Square Foot Estimate | |
|---|---|
| Asphalt/Blacktop | $7 - $13 |
| Gravel | $1 - $3 |
| Chip Seal | $2 - $5 |
| Heated | $12 - $21 |
How much does it cost to install an asphalt driveway?
13 rows · 20/08/2018 · Paving a new asphalt driveway costs $1,200 to $4,000 on average. The cost to pave a private ...
How much does it cost to pave a driveway in 2020?
08/06/2018 · Asphalt paving material usually costs $40-80 a ton. One ton will cover 30 to 80 square feet. A residential driveway averages 9-24 square feet. Other materials are needed for asphalt driveway installation as well, and will affect the final cost.
How much does it cost to widen a single car driveway?
A typical asphalt driveway can cost $4,000 to $8,000 and up, but most spend about $4,500 on the project. Several factors influence this cost, learn more about how much your asphalt driveway could cost.
Is an asphalt driveway cheaper than concrete?
02/01/2022 · The average cost to build an asphalt driveway is about $5,800 (Asphalt paving a 24’ x 24’ driveway with a 6” stone base, minimal site prep). Find here detailed information about asphalt driveway costs.
Is 2 inches of asphalt enough for a driveway?
Residential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate. Underneath this you have soil.25-Feb-2019
Is blacktop cheaper than concrete?
The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.13-Jun-2018
What is the cheapest type of driveway?
Advantages of Aggregate Driveways Pound for pound, aggregate is the cheapest of these four common driveway materials. A basic gravel driveway can cost as little as $0.50 per square foot – an order of magnitude less than a professionally installed asphalt, stone, or concrete driveway.
What is the difference between asphalt and blacktop?
Asphalt generally refers to major highways and streets, whereas, blacktop is commonly used to refer to driveways and residential roads. As a matter of fact, blacktop is a type of asphalt.
Can you asphalt your own driveway?
Making your own asphalt driveway is hard work, and not a job for one person. If you have friends who will help you, it is possible to save a lot of money by doing your own driveway, even after the cost of rental equipment is factored in.
What is the cheapest way to pave driveway?
Gravel driveways are hands-down the most affordable option upfront. Asphalt driveways place second in cost, followed by cement and pavers. Although gravel driveways are the least expensive initially, they require the most maintenance long-term.
Which type of driveway is best?
Longevity: The longevity of an asphalt driveway is a lot higher than most other driveway options. Homeowners can expect their asphalt driveway to last at least 20 years. Durability: Asphalt driveways are hard wearing and durable. The seal that is applied on top of your asphalt driveway encourages greater longevity.17-Jan-2018
How do you harden a gravel driveway?
How to Stabilize a Loose Gravel DrivewayRemove organic matter from the driveway. Tree limbs, leaves and mud can end up on the driveway. ... Fix any drainage issues. Look carefully at your driveway after a rain. ... Fill potholes and other low spots. Most gravel driveways develop low spots over time. ... Compact the gravel.
What are the different types of driveways?
Then we’ll take a closer look at how to calculate the cost of an asphalt driveway. Types of driveways include: asphalt. b rick.
How much does a paver driveway cost?
They offer a wide variety of designs, shapes, sizes, and colors. A paver driveway will cost between $13-15 per square foot. A poured concrete driveway ranges from $7-9 per sq ft.
Is asphalt a good driveway material?
Asphalt is a common driveway material. It’s reasonably durable (20 years), relatively inexpensive (compared to concrete) and if you’re willing to invest in dressing it up with special surfaces, it can look really good.
What is crushed stone?
Crushed stone is similar to a gravel driveway. However, crushed stone usually has a larger bottom layer with crushed stone on top. This creates a smoother more uniform appearance. Crushed stone is available in many types, so you have a wide variety of choices.
How much does it cost to install asphalt?
Asphalt paving material usually costs $40-80 a ton. One ton will cover 30 to 80 square feet. A residential driveway averages 9-24 square feet. Other materials are needed for asphalt driveway installation as well, and will affect the final cost.
Is concrete more expensive than pavers?
Poured concrete is more common and less expensive. A concrete slab is poured and then allowed to dry. Designs can be stamped in the wet concrete, or color can be applied. A paver driveway offers a beautiful drive at a cost. It comes ready to install in individual pieces, similar to bricks, but made from concrete.
What is the cheapest driveway?
A gravel driveway is the cheapest option if you need a new driveway, at $1-3 per sq ft. It matches with any style of home. Classic gray gravel is well suited to a winding country drive. White gravel provides a modern look. There are a few downsides to a gravel drive.
How much does it cost to install asphalt driveways?
Asphalt driveway installation pricing across the country can be anywhere from $1,500 to $10,000, but most spend $4,000 to $8,000. The amount varies depending on such factors as the cost of labor and the general difference between pricing in different states. The amount of differing figures can be overwhelming.
Does a bigger driveway cost more?
A bigger driveway will inevitably cost more, even if you opt for a lower grade of asphalt. The length is one thing, but don’t forget that the size of a drive often includes how wide it is. Those who need to have parking space for a lot of cars will pay a much higher sum.
How thick is a driveway?
In general a 4″ thick asphalt layer is suitable for most driveways, but 5-6″ is recommended to support heavier vehicles and loads. [3]
Can you use topsoil as a base?
Never use topsoil as a base for any structures which require stability. Topsoil is the soil you use for flowerbeds. The type of soil you need to prepare your new driveway with should be as free of organic compounds as possible. It is also known as ‘fill dirt’.
How many square feet does a ton of asphalt cover?
One ton of asphalt will cover 26.66 square foot of driveway at a 6-inch depth. You find out the square footage of your driveway by just multiplying the length by the width. The square footage in this example is 20′ times 40′, which equals 800 square foot.
Does removing a driveway add to the cost of paving?
Removing an existing driveway will undoubtedly add to the costs of a paving project. Removing existing paving may take considerable time for the crew, while also generating a significant amount of waste that needs to be disposed of.
How much does labor cost?
Labor Costs. The cost of labor for general contracting work is usually between $40 and $55 per hour . Labor rates differ around the country, and some homeowners may know someone in the industry who may offer a reduced price. However, regarding averages, it is best to assume that labor will cost around $40 per hour .
How long does asphalt last?
Additional Considerations and Costs 1 Asphalt lasts around 20 years when maintained properly. With good maintenance and sealing, it is even possible to reach 30 years. Otherwise, it may only last about 15 years due to the oils oxidizing. 2 If your driveway is on a slope or has a lot of curves, it costs more. 3 If your driveway is very complex or long, it may pay in the long run to work with an engineer who determines proper drainage so that your driveway lasts longer. 4 If you have an HOA or city planning department, submit the plans for a new driveway to find out if there are any fees or stipulations involved. 5 Adding a new asphalt driveway increases the curb appeal of your home and boosts its resale value slightly. 6 You may walk on your new driveway in 24 - 48 hours and drive on it within 3 - 5 days. Keep in mind that it takes up to a year to settle and cure and that you should keep heavy equipment off of it during this time, particularly in the summer months.
What is the best material to pave a driveway?
If you live in the north and plan to pave your driveway, asphalt is likely the chosen material. Asphalt driveways are common in northern climates where the black color and resiliency of the material do well in harsh, cold winters. Asphalt is also less expensive than concrete and easier to maintain than gravel.
How much does it cost to pave an asphalt driveway?
For this reason, the cost to pave an asphalt driveway is between $2 and $6 a square foot on average, fully installed, as opposed to the range of $7 to $15 a square foot installed for a new driveway.
Is it cheaper to install asphalt driveways?
Paving with asphalt is relatively inexpensive. Most of the costs of installing a new driveway come from the work that needs to be done before paving. This is where most of the costs of a new asphalt driveway come in. The area must be excavated and graded.
What type of asphalt is best for a driveway?
If you live in an area that sees a lot of heavy rainfall and want to make sure your driveway drains properly, porous asphalt may be the right choice. This type of asphalt is designed so that water runs through it, rather than staying on the surface. It is not always the best choice in freeze/thaw climates because it is more likely to create frost heaves where quickly expanding ice can force the pavement apart. But it can help with drainage in high-rain areas. It costs between $2 and $5 a square foot.
How much does tar chip cost?
It is longer wearing than regular asphalt and costs an additional $3 a square foot or $10 to $18 a square foot fully installed.
Is concrete more expensive than asphalt?
Concrete tends to be more expensive than asphalt because paving an existing driveway with asphalt costs $2 - $6 a square foot. Paving an existing driveway with concrete costs $4 - $10 a square foot, which is nearly twice as much in some areas.
How much does it cost to install asphalt?
How Much Does Installing an Asphalt Driveway Cost Near You? 1 Florida: $1,000–$9,010 ($3,700 on average) 2 California: $2,800–$20,400 ($9,180 on average) 3 Texas: $1,800–$14,000 ($5,970 on average) 4 Colorado: $1,850–$15,250 ($6,920 on average) 5 Missouri: $900–$8,100 ($4,240 on average) 6 Ohio: $1,580–$15,000 ($5,260 on average) 7 Maine: $1,920–$12,000 ($5,280 on average) 8 New York: $1,500–$11,000 ($4,700 on average)
How many square feet does a ton of asphalt cover?
A ton covers between 30 and 80 square feet, depending on the depth of the driveway. The minimum asphalt depth for a driveway is 2 inches, and homeowners often go with a depth of up to 6 inches to enhance stability and longevity. For 2-inch depth, you’ll get 80 sq. ft. of coverage per ton.
Is recycled asphalt good for you?
Recycled asphalt is an eco-friendly, cost-effective choice if it's available in your area. If you’re replacing an existing asphalt driveway, your contractor might be able to mill and reuse that in your new driveway, which can significantly reduce your materials cost.
How much does recycled asphalt cost?
Recycled or reclaimed asphalt is much more affordable than new asphalt, at just $10 to $20 per ton. Ask your contractor about recycling your existing asphalt, if you have any, and ask if reclaimed asphalt is available in your area. It pays to be eco-friendly! Choosing recycled or reclaimed blacktop reduces the amount of new asphalt you'll need ...
Does a steep driveway require more leveling?
The gradient of your property has a significant impact on the total driveway cost. If the driveway is on a steep incline, it requires more leveling to make asphalt a viable option. This is labor-intensive and may require the use of extra equipment.
How much does it cost to overlay asphalt on concrete?
Overlaying asphalt onto concrete costs $3 to $7 per square foot , the same as overlaying old asphalt. It's important to note that this option, while reasonably budget-friendly, isn't a long-term solution as it doesn't have the same life expectancy as a new concrete or asphalt driveway.
How much does it cost to heat a 600 foot driveway?
So, if you have a standard 600-foot driveway, a heated driveway costs between $7,200 and $15,000 installed, including the heating system.