What is a Stryker frame?
Stryker frame - holds the patient and permits turning in various planes without individual motion of parts. Synonym (s): Stryker bed Stryker saw - a rapidly oscillating saw used for cutting bone or plaster casts. Want to thank TFD for its existence?
Where are Stryker products sold?
Stryker Corporation. In the United States, most of Stryker's products are marketed directly to doctors, hospitals and other healthcare facilities. Internationally, Stryker products are sold in over 100 countries through company-owned sales subsidiaries and branches as well as third-party dealers and distributors.
Is Stryker in a civil lawsuit?
In the fall of 2007, Stryker, along with the related companies Biomet, Zimmer Holdings, DePuy Orthopaedics and Smith & Nephew, were involved in civil litigation with the U.S. Department of Health and Human Services, Office of Inspector General.
Who is the founder of Stryker?
Built on ingenuity. When Dr. Homer Stryker, an orthopaedic surgeon from Kalamazoo, Michigan, U.S.A, found that certain medical products were not meeting his patients’ needs, he invented new ones. As interest in these products grew, Dr. Stryker started a company in 1941 to produce them.
What is a striker frame?
[stri´ker] an apparatus specially designed for care of patients with injuries of the spinal column or cord. It is constructed of pipe and canvas and is designed so that the patient can be turned without difficulty.
What is a Stryker bed?
A device that supports two rectangular pieces of lightweight but strong material so that one side is on the anterior surface of the patient and the other is on the posterior surface. The patient is sandwiched firmly between the pieces of material. The device may be rotated around the patient's long axis.
How do you lower a Stryker hospital bed?
FL18E2: Press and hold the Hi-Lo switch in the foot end control panel to lower the bed until it rests onto its legs.
Is Stryker a manufacturer?
Stryker - Medical Devices and Equipment Manufacturing Company | Stryker.
Who makes Stryker hospital beds?
Stryker CorporationTypePublicHeadquartersKalamazoo, Michigan, U.S.Key peopleKevin A. Lobo (Chairman and CEO) Timothy J. Scannell (President and COO)ProductsMedical devices orthopaedic implants surgical equipment neurovascular products patient handling and emergency medical equipmentRevenueUS$17.108 billion (2021)9 more rows
How much does a Stryker bed weight?
Weight: 570 lb (259 kg). Weight Capacity: 500 lb (227 kg). Height Range (to litter top): High: 30" (76.2 cm).
How do you raise the head on a Stryker hospital bed?
2:109:42How to Use a Manual Stretcher Stryker 1005 - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext you have the pedal that's going to drop it back down and if you push it down to the left-handMoreNext you have the pedal that's going to drop it back down and if you push it down to the left-hand side. It's gonna drop the head down faster than the foot. And it's going to elevate the feet.
How do you unlock a Stryker bed?
To unlock the Security Lock-Out: Enter the 1 to 6 digit User Passcode (Facility Selected Code). 2. Once the User Passcode has been successfully entered, an audible “chirp” will sound and the three Patient Lock-Out buttons will begin to flash to indicate that the bed is now unlocked.
Where are Stryker products sold?
Internationally, Stryker products are sold in over 100 countries through company-owned sales subsidiaries and branches as well as third-party dealers and distributors.
What company does Stryker own?
The Orthovita business now makes up the Stryker Orthobiologics division, which specializes in biomaterials for all Stryker divisions. In July 2011, Stryker completed the acquisition of privately held Memometal Technologies S.A.. France based Memometal develops, manufactures and markets products for extremity indications based on its proprietary methods for preparing and manufacturing a shape memory metal alloy. In August 2011, Stryker signed a definitive agreement to acquire privately held Concentric Medical, Inc. in an all-cash transaction for $135 million. Concentric's products include devices for the removal of thrombus in patients experiencing acute ischemic stroke along with a broad range of AIS access products.
How many pages of documents did Stryker produce?
Since governmental filing of the injunction, Stryker notes that it has produced in excess of 300,000 pages of documentation in compliance with the mandate. U.S. Government counters, however, that the documentation was not proper in scope and format. Law officials expect the investigation to continue for several months.
How many employees did Stryker have in 2012?
At the end of 2012, Stryker had approximately 22,000 global employees and annual sales of $8.7 billion. 35% of those sales were outside the U.S. In a 2012 global market overview of top medical technology firms, Stryker was ranked number 10 with total portfolio sales in excess of $8.6 billion.
What are the three segments of Stryker?
Business segments. Stryker segregates their reporting into three reportable business segments: Orthopedics, Medical and Surgical (MedSurg), and Neurotechnology and Spine. Orthopedics products consist primarily of implants used in hip and knee joint replacements and trauma and extremities surgeries.
When did Howmedica become Stryker Orthopaedics?
Howmedica became Stryker Orthopaedics. In August 2000, Stryker acquired, with stock, Guided Technologies, a developer and manufacturer of optical localizers purposed for use in healthcare and industrial.
When did Stryker buy Osteonics?
In 1979, Stryker made an initial public offering of stock and later acquired Osteonics Corporation, entering the replacement hip, knee, and other orthopedic implants market (Stryker). In 1999 annual sales reached $2.1 billion, and in 2000 Stryker was included in the S&P 500 and the Forbes Platinum 400 for the first time. In 2002 sales reached $3.0 billion and Stryker was listed in the Fortune 500 for the first time.
What are the different types of frames?
Figure 1. Types of frames: (a) braced, (b) single-span and single-level, (c) multispan and single-level, (d) single-span and double-level, (e) multispan and multilevel, (f) closed
What is frame type skeleton?
According to the way in which overall rigidity and stability of buildings are provided, a distinction is made between frame-type skeletons, in which the interlocking connections of the columns and crossbeams are rigidly constructed as frames capable of absorbing deformation moments and transverse forces from wind load and dead load, and skeletons with ties having articulated or partially binding joints , in which wind loads are absorbed by rigid horizontal and vertical stiffeners.
What are the two methods used to design a frame?
Frames are usually designed by the general methods of designing statically indeterminate structures: the moment distribution method, the slope-deflection method, and the combined method . In the design of complex frames such as skeletons of multispan, multistory structures, approximate methods of calculation are employed. Such methods are based on the approximate method and on the simplification of structural modes by, for example, disregarding the movement of joints in the design for vertical loading.
What is a frame?
Frames are made of wood, metal, or reinforced concrete. The frame determines the strength, stability, durability, and shape of a product or installation. Strength and stability are provided by rigid attachment of the beams in interlocking connections or hinged joints and by special stiffening elements, which give the product or installation a geometrically invariant shape. The rigidity of frames is often increased by sheathing, casing, or walls on the product or installation.
What is the number 1 frame on a plane?
A fuselage normally is divided into numbered frames. The number 1 frame is at the nose of the aircraft and subsequent frames are toward the rear.
