30 Gallon ProMax Residential Electric Water Heater - Short Model
| Intended Household: | 2 Person |
| Application: | Plumbing |
| Capacity (Gallons): | 30 |
| Fuel Type: | Electric |
| Number of Elements: | 2 |
| Tech Specs | |
|---|---|
| Max Wattage: | 6000 |
| Voltage: | 240 |
| Minimum Voltage Required: | 240 |
| Limited Tank Warranty: | 6 Years |
Who owns AO Smith water heaters?
12 rows · Save money and energy with this energy efficient model that operates at a 0.89 Uniform Energy Factor ...
What is the best brand of electric water heater?
Smith's 30-gallon model is designed to last. It features dual copper heating elements, a protective anode rod and a ceramic fused tank shield designed to reduce corrosion and provide ultimate tank protection. It also features a self-cleaning dip tube designed to reduce sediment build-up and extend the overall life of the water heater.
How to drain an AO Smith electric water heater?
15 rows · With a 30-gallon (nominal) tank delivering 4,500 watts, the ENT-30 delivers a first hour ...
Should you buy an electric or gas water heater?
In the spec sheets you can find all the relevant technical information on our electrical, gas-fired, indirect and solar thermal products
What are the dimensions of a 30 gallon electric hot water heater?
Product DimensionsType:TallHeight:46 1/2"Diameter:19"Width:19"Depth:19"1 more row
What size breaker do I need for AO Smith water heater?
A. O. Smith's Tankless Electric design includes a soft start to produce a softer electric draw when powering on, reducing light dimming. This model requires 240 volts, 58.3 amps, 1 x 60 amp double pole breaker and #6 AWG wire size.
What size breaker do I need for a 30 gallon water heater?
The branch circuit needs to be calculated at 125% of the rated ampacity for this type of water heater to be considered a continuous load. In order to work on a 20 Amp OCPD, you will need a 25 or 30 Amp circuit.
What are the dimensions of a 30 gallon water tank?
34" x 18" x 12"A.A 30 Gallon RV Fresh/Gray Water Tank 34" x 18" x 12" - BPA Free (30 Gallon)
Can you use a 50 amp breaker for a water heater?
Electric hot water heaters typically require a dedicated 30-amp, 240-volt breaker.01-May-2020
Can I use a 40 amp breaker for a water heater?
Can I use a 40 amp breaker for a water heater? - Quora. Yes, if AND ONLY IF the wires from the breakers to the water heaters are sufficient to carry 40 amps (e.g. 8-gauge 90C THHN copper). The largest residential heating elements for a tanked water heater are 7000 watts.
Does a water heater need a neutral?
A basic heater doesn't need a neutral since the thermostats and the elements all work on 240 volts. Some heaters now have electronics in them for an internet connection or energy monitoring and they may need a neutral to supply 120 volts for the power supply.
How long does a 30 gallon hot water heater last?
about eight to 12 yearsBased on the manufacturer's suggested service life, the life expectancy of a water heater is about eight to 12 years. That varies with the location and design of the unit, quality of installation, maintenance schedule and water quality.
Can you use a 20 amp breaker on a hot water heater?
But going by the NEC 125% rule, a 20 amp is a risk of frequent tripping and could damage the water heater. A 25 amp breaker is sufficient; however, most electricians will install a 30 amp circuit to provide room for electrical fluctuations as outlined above.17-Jun-2021
How tall is a 30 gallon gas water heater?
60 1/2"Product DimensionsType:TallHeight w/Draft Hood:60 1/2"Diameter:18"Width:18"Depth:18"4 more rows
How heavy is a 30 gallon hot water heater?
Tank-style water heaters weigh an average of 150 pounds empty, but it varies by size. On average, tank-style water heaters weigh 2.6 pounds per gallon of capacity. Tankless water heats are significantly lighter, averaging 27 pounds. And, under the sink water heaters weigh an average of 32 pounds.22-Jan-2021
Is 30 gallons a lot of water?
According to the Environmental Protection Agency, the average person wastes up to 30 gallons of water per day. That's a huge amount, especially when you consider that the average person also uses 100 gallons per day for basic household and personal needs.19-Oct-2015
How does a water heater work?
How it Works. Cold water enters the water heater through an internal “dip tube” which forces the cold water to the bottom of the tank and pushes hot water out through the outlet connection. This arrangement provides the most hot water for a given tank size. There are two thermostats on a typical residential water heater.
What is a pressure relief valve?
The temperature and pressure relief valve is a safety device designed to open if the internal temperature or pressure of the tank exceeds certain limits. Water heaters should be large enough to provide adequate hot water even when temperatures are cold and household demand is greatest. Incentives add.
What is rebate program?
Rebate and incentive programs provide cash-back to consumers for the purchase of appliances that meet certain energy efficiency standards. Often, these standards are tied to the ENERGY STAR ® certification program.
A.O. Smith
The Dura-Power™ DEN (standard upright) and DEL (lowboy) series is available with tank capacities from 6 through 119-gallons. They can be installed for nonsimultaneous and single element operation (maximum input up to 6 kW), or for simultaneous dual-element operation (maximum input up to 12 kW).
Product Description
The Dura-Power™ DEN (standard upright) and DEL (lowboy) series is available with tank capacities from 6 through 119-gallons. They can be installed for nonsimultaneous and single element operation (maximum input up to 6 kW), or for simultaneous dual-element operation (maximum input up to 12 kW).