Full Answer
What size is a 8 person dining table?
The average round dining table size for eight is 72 inches in diameter (6ft; 183cm), although anywhere from 54–60 inches (5ft; 137–152cm) can fit six to eight people. Depending on the design, it is possible to squeeze seven to nine seats on round tables measuring anywhere from 5–7 ft.
What size round table will fit 8 people?
- Painted Finish - This can be anywhere between rustic country white to modern glossy black. ...
- Veneer - Most affordable round dining tables consist of veneers as the materials are less expensive compared to real or solid wood. ...
- Solid Wood - Solid wood is the best material choice for round dining tables. ...
What size should rectangular table be to seat 8 people?
The general standard you’ll come across, though, will be around 78 inches long by 36 inches wide for a eight-seater rectangle dining table size.
What is diameter round table to seat 8 people?
Use the rectangular table measurements for oval tables. A round table for eight people must be 192 inches in circumference -- 24 inches times 8 -- or 62 inches in diameter (circumference divided by pi, or 3.14, equals diameter).
How big is a table that seats 8?
A table that seats four should be about 48" long. To seat four to six people, look for a table that is at least 60" long. For six to eight guests, your table should be at least 78" long. The rule of thumb is to allow 24" of space per seat at your dining table.
How big does a dining room need to be to seat 8?
A dining room that can accommodate an 8-person table has a common measurement of 12' x 16' (192 square feet) and 14' x 18' (252 square feet). This big dining room size would be capable of accommodating 8 people, long dining tables, and huge-sized chairs.
How many does a 72 inch table seat?
Stretching the length to 72" will allow you to comfortably seat 8 people, and increasing the size to 72" x 48" will allow you to comfortably seat 10.
How many can you seat at a 8 foot rectangular table?
With this in mind an 8 foot banquet table will comfortably be able to hold 8 people ( 4 people on each side). You may also be able to squeeze an additional 2 people by putting a seat at each end of the table.
How big is a rectangular dining room table?
The standard rectangular dining room table size when seating four people is 36 inches wide by 48 inches long. This sizing will comfortably fit a small family of four and allow for plenty of elbow room between each person seated. To accommodate more people, the length of the table increases.
How wide is a table?
Ten to twelve people: 36 inches wide by 12 feet long. While these are the standard sizes, the actual width of a rectangular table should be between 36 and 42 inches wide.
How much space between chairs and walls?
As a general rule of thumb, leave 36 inches between your walls and the table to allow enough space for foot traffic and chairs. For rectangular tables, you should also allow a minimum of 23 inches between chairs for comfortability and ample space among each diner.
What is a square dining table?
The final dining table shape to discuss is square, perfect for creating a bistro feel in your dining area. Square tables work great in homes that seek a more contemporary aesthetic. The dimensions of these tables are best suited for box-shaped rooms with a limited amount of space. Overall, square dining tables are generally intended for a small number of people seated.
What is the difference between an oval and a circle dining table?
With both circle and oval tables, no corners make for easy navigation in close quarters and a very clear view of all the diners at the table. Oval dining tables are generally used for small rooms that still require space for four or more diners. They provide approximately the same amount of surface area as rectangular tables, while occupying much less visual space.
How much clearance between a dining room table and wall?
Individually subtract six feet from the width and the length. This will allow for the necessary three feet of clearance between the walls and table on all sides. The resulting numbers will give you the maximum suitable dining table size for your space.
What is a dining room table?
The dining table is one of the primary focal points in any home. It is here where your family and friends meet to share laughs, stories, and relish in home-cooked meals. Choosing the right dining room table means selecting the proper shape and dimension to suit your home and the amount of people who will be seated there on a daily basis.
What is the standard size of a round dining table?
The standard round dining table dimensions for two to four people is 36 inches in diameter.
How wide should a rectangular dining room table be?
While rectangular dining room tables offer many configurations based on the number of people you want to seat, it’s recommended to choose a table that’s at least 36 inches but not more than 40 inches wide . This allows enough room for place settings and leaves enough room for passing food platters.
How high should a dining table be?
Share#N#Share on Pinterest#N#A standard dining table height ranges from 28 inches to 30 inches high depending on the type of legs or footings. This height leaves enough room for typical adults to rest their feet on the floor. This is your family dining height or formal dining room table height.
What are the shapes of dining room tables?
Dining room tables are typically designed with one of three shapes; square, rectangle, or circle. Some dining room table tops are designed using real wood in its natural state with naturally uneven edges.
How many people can fit on a square table?
Square Table Sizes. Square tables have equal length and width and typically are made for four people at the most. The standard range is 36 inches to 44 inches leaving space for up to four people with enough elbow room.
How big is a dining room?
This may be laid out as 10 feet by 20 feet. Larger dining rooms may be 14 feet by 18 feet or more.
What is round table?
Round tables are similar to square tables when it comes to fitting in a small space. The diameter, or the length from one edge to the other crossing the center, is the size used to measure round dining room tables. Not having corners allows flexibility for seating and makes it easier for diners to see each other.
Standard Dining Table Sizes
One of the most asked questions we get is "what is the right size dining table for my space?" It's a question that's often answered with more questions.
Calculating Table Size
The Old Mill 86" Reclaimed Wood Dining Table and Portofino Leather Dining Chair Berham Chestnut
Standard Dining Chair Sizes
Another important factor to take into account when selecting a table for your space is the type of dining chairs you'd like to use.
Standard Gathering Table Sizes
The Steamboat 66" Gathering Table Weathered Gray and Mozambique Wood and Iron Counter Chair Walnut
Standard Round Dining Table Sizes
Round dining tables are a great option for a smaller space, as the lack of corners make the table much more compact. A round table also cultivates an atmosphere of coziness and togetherness, since you can easily see and converse with others. For larger groups, however, we recommend going with a standard dining table.
Standard Buffet & Sideboard Sizes
A sideboard or buffet, also known as a buffet table, is a long, low piece of furniture that's usually placed in a dining room to store and display items. It can also be used as an extra space for serving food. Sideboards and buffets are versatile enough to have in a living room, an entryway, and a hallway as a storage and display piece as well.
What Are the Dimensions of an 8-Foot Table?
Standard 8-foot tables can range in size depending on the type of table you are interested in. For large families, 8-foot dining tables are relatively common. These tables have a width of 30 inches and a length of 96 inches.
Different Types of 8-Foot Tables
Dining tables are available in a variety of sizes and can seat two to 12 people. The Gather Table is a farm-style, wooden dining table that comes in three sizes, fitting six to 10 people.
8-Foot Game Tables
Some popular gaming tables, like beer pong and pool tables, also typically come in 8-foot lengths.
How Many Chairs Do You Need for an 8-Foot Banquet Table?
For banquet tables, you place chairs on both sides of the table. If you’re using a standard 8-foot banquet table, the recommendation is three chairs on each side. This is because some guests prefer to turn their chairs when the speaker is presenting.
What Size Tablecloth Fits an 8-Foot Table?
Tablecloth linens come in many different sizes and styles. A standard tablecloth linen is 114 inches long by 52 inches wide and fits a 6-foot rectangular banquet table. A full drop tablecloth linen is 132 inches long by 90 inches wide.
Related Questions
There are several different sizes of foosball tables, depending on the level of gameplay.
What is a 54" dining table?
This 54" Dining Table is perfect for hosting gatherings both large and small thanks to its generous size. Made with solid wood, the intricate grains of the wood are highlighted with a white-washed finish on the surface, further adding to the elegance of the piece. The table’s base provides classic charm and makes it a timeless piece for any dining setting. The handcrafted nature of this product may produce minor differences with color and or shade. Subtle variations may occur from piece to piece and may not appear exactly as pictured, adding to its unique qualities.
How wide is a live edge table?
The table is roomy at 82 inches wide and 42 inches deep.
What is barrelville dining table?
Barrelville Extendable Dining Table is an elegant grouping that reflects her love of old Hollywood style. Her designs are a perfect collaboration of classic elements with an updated aesthetic and modern function. Barrelville's beautiful Shadow Gray finish is crafted from Hardwood Solids with Walnut Veneers and accompanied by custom-designed metallic Silver Screen-finished hardware and accents. The collection has a refined yet comfortable, appearance, ideal for adding subtle glamour to your home.
How many seats does a butterfly leaf dining table have?
This dining table offers room for 4 with the 18 in leaf stored. With the self-storing butterfly leaf in place, the table expands to a roomy 78 in for 6 seats. Substantial turned legs and a chamfered table edge make this table beautiful as well as functional.
What is a Zappa table?
The Zappa table offers organic style with a modern sensibility. Made of hardwood solids and mango veneers with a medium cherry finish, the dining table with two 18” leaves features a trestle style base with mortise-and-tenon joinery and size versatility seating up to eight comfortably.
What is the heart of an entertaining table?
Not only is it the spot where you serve up dinner party courses and festive family feasts, but it sets the aesthetic tone for your room and allows you to stage centerpieces that are all your own. Just take a look at this one for example: contemporary with a rustic twist, its rubber-wood frame pairs a clean-lined silhouette with a gray oak finish.
What is a butterfly leaf table?
This dining table also incorporates a practical foldable leaf, offering up convenience as well as essential extendable to make room for more family and friends. It definitely makes a good addition for all kitchen space and corresponds to all sorts of dining-room concepts.