How many gallons of water is a 5 person hot tub?
A 5 person hot tub contains about 300-350 gallons of water. How many gallons is a 6 person hot tub? A 6 person hot tub is similar in size to a 5 person tub. So there are about 325-375 gallons of water in a 6 person hot tub.
How much does it cost to run a hot tub?
Your hot tub electricity cost depends on a few factors: unit price per kilowatt hour, the temperature you heat the hot tub to and how often the tub is used. In advanced testing, we have found that it typically costs less than $1 per day to run a hot tub, with more recent spa models hovering around $23 per month.
How much chlorine do you put in a new hot tub?
As a general rule the first time you fill a new hot tub, add 1.5 times the amount of chlorine that is recommended for weekly chlorination for the size of the hot tub. The goal is 5 to 8 parts per million, as opposed to the daily goal of 2 to 4 ppm.
How long does it take to fill the hot tub?
It took 1 hour and 30 minutes to fill the hot tub. 1 hour x 60 = (60 minutes + remaining 30 minutes) x 60 = 5,400 seconds. Get your 1-gallon jug and timer ready.
How much does it cost to run a 500 gallon hot tub?
about $1 per dayHowever, it's also wise to ask yourself, “How much does it cost to run a hot tub in the winter to keep the water warm?” On average, it's estimated that a 500 gallon spa costs about $1 per day to keep ready to use at all times.
How long does it take to heat a 500 gallon hot tub?
On average, most hot tubs will take about 4 hours to reach 100 degrees. But it can take up to 8 hours for hot tubs to reach the desired temperature. Factors include the capacity of the tub, ambient air temperature, and the temperature of the water from the hose.
How big is a 10 person hot tub?
SpecsLength:119 Inches / 302 cm - Add 3" For CabinetWidth:93 Inches / 236 cm - Add 3" For CabinetHeight:39 Inches / 99 cmPrimary SpecsWeight Full5793 lbs / 3093 kg6 more rows•May 16, 2017
How much does a 500 gallon hot tub weigh?
By design, home spas are large, bulky, oddly shaped, and extremely heavy. In fact, the average empty weight of a hot tub is around 500 to 1,000 pounds!
Do hot tubs use a lot of electricity?
Yes! Hot tubs run on an electrical supply. They usually need between 13 and 40 AMPS of power to run. The electricity powers the heater, pumps, lights and all the other working components on the hot tub.
How long does it take to drain a 500 gallon hot tub?
Drain your hot tub. Depending on the size of your spa, it should take around an hour to drain using the hot tub's drainage spigot, or ten minutes to drain with a submersible pump.
Can I put a hot tub on my deck?
Yes, you can put a hot tub on a deck. Decks built ground level up to 2 feet off the ground can support up to 100 lbs per square foot; sufficient for most hot tubs. But decks 2 feet or higher will need added support. The added support posts should be no more than 30″ apart & ideally placed in poured concrete.
What is a good size hot tub?
Choosing a Hot Tub Based on SizeHot Tub Size RangesLengthHeightSmall (2-4 people)5'4” - 7”29” - 35”Medium (5-6 people)6'6” - 7'9”33” - 38.5”Large (7+people)7' - 9”36” - 38”Apr 25, 2018
How much room do you need around a hot tub?
A good rule of thumb for a hot tub is to give yourself about a foot of space on each side of the tub. This leaves room for things like opening the cover. Most covers require at least 18 inches of space behind the tub as well as a few inches on the left and right side for the arm that helps you lift the cover.
How long do hot tubs last?
5-20 yearsA hot tub can last anywhere from 5-20 years or more. Cheaper hot tubs made with lower quality materials won't last long. If those hot tubs are not well maintained, they may not last more than 5 years. Quality hot tubs that receive excellent care can be enjoyed for as long as 20 or more years.
Can I put a hot tub on pavers?
Sitting a Hot Tub on Pavers If using pavers, select ones that are smooth and can be interlocked at a level height to create a solid, flat layer on top of a concrete base. If you do not want to install a concrete slab underneath the pavers, sand or gravel will be needed to properly support the weight of the hot tub.
How big is a 6 person hot tub?
A hot tub designed to hold 6-8 people is generally classified as a larger unit, with the following average dimensions: Length: 7'-9' Width: 7'-9'2” Height: 36”-38”
How many gallons of water does a hot tub hold?
A small 2-3 person hot tub will hold approximately 300 gallons, whereas a large 7-7 person hot tub will hold up to 675 gallons or more. Hot tubs range in both size, shape, and depth. All of those factors affect how many ...
How much water does an 8 person hot tub hold?
An 8 person hot tub can hold about 615-675 gallons of water. These behemoths can weigh as much as 7800 pounds when filled! So think twice before installing one of these bad boys on your deck. I have a full article about safely putting a hot tub on a deck.
How to measure tub depth?
Use your tape measure to check the width, length, and depth of your tub. Write down all the numbers in inches, Multiply the length by the width by the depth. Take the result and divide by 1,728 (this is the number that converts cubic inches to cubic feet). Multiply again.
How long does it take to fill a hot tub?
It took 1 hour and 30 minutes to fill the hot tub. 1 hour x 60 = (60 minutes + remaining 30 minutes) x 60 = 5,400 seconds. Get your 1-gallon jug and timer ready. Make sure your hose is set at the same pressure as it was to fill your hot tub. If there’s a variance here, it will mess up the final calculation.
How to get rid of a hose in the tub?
Turn on your hose to full or a set point and leave it running in your tub. Set a timer and wait until it’s filled. This could take some time so it might be a good time to grab an adult beverage with a nice novel and relax. Stop the timer when it’s full.
Does water evaporate in a hot tub?
Water does indeed evaporate from hot tubs. This is one important reason to know precisely how many gallons your hot tub holds. You’ll have to add water accordingly from time to time. When you do, make sure to check the chemical levels to prevent bacteria growth.
How much does it cost to hook up a hot tub?
Depending on your current electrical setup, electrical connections for a hot tub typically cost from $300 to $1,000. You'll also need a ground-fault circuit interrupter (GFCI), a mechanism that shuts off the electricity supply if a ground fault occurs.
Is it cheaper to own a hot tub?
However, if you plan for these expenses, owning a hot tub is much more affordable than you think.
What is the name of the chlorine in a hot tub?
Chlorine that you add to the water in a hot tub is typically known as free chlorine. But, when the same chlorine interacts with the bacteria, germs, oils, and other grooming products in the tub, it is called combined chlorine. To clean this ‘dirty’ or ‘used’ water, you need to engage in a process known as ‘shocking the water.’.
How to clean dirty hot tub water?
This is done by adding a slightly higher concentration of chlorine to the hot tub water. To be safe, you can add small amounts of chlorine to the water in between shock treatments. This keeps the water safe, clean, and healthy.
How long should you wait to use chlorine in a hot tub?
However, if you use chlorine or bromine to shock the hot tub, you need to wait at least 24 hours. It is recommended that you test the chlorine levels before using the hot tub, just to be safe. Ensure that it has stabilized to 3-5 ppm before using the hot tub again.
How long does it take for chlorine levels to stabilize in a hot tub?
The chlorine levels will stabilize naturally within a few days.
Do you need to disinfect a hot tub?
Yes, essentially, the hot tub is a warm soup of all your grooming products and dead skin. That is why you need to use disinfectants like chlorine to clean and sanitize it. Let’s talk about this in detail.
Is chlorine safe to use in a hot tub?
When this is taken care of, chlorine can be one of the most effective and safe disinfectants. So, how much chlorine do you need to put in your hot tub at home ?
Can you overuse chlorine in a hot tub?
As you might already know, chlorine is a chemical disinfectant. So indeed, you can’t overuse it, as it could affect your skin, hair, eyes, and is potentially harmful.
Hot Tub Maintenance Basics
Whether you’re a spa owner or you’re a regular hot tub owner, you need to take proper care of your hot tub, and for that, you have to know the basics of hot tub care. Maintaining a hot tub’s cleanliness and keeping it free of bacteria and other contaminants is important.
Hot Tub Maintenance FAQ
It’s common to have a few questions that pop up in your head when you think about hot tub maintenance. Here are some of the most common questions users have.
Concluding on Hot Tub Maintenance
Hot tub maintenance won’t seem like a big deal to you once you follow the recommended instructions. It’ll be like any other routine chore that you can carry out without getting bored or exhausted. Not to mention your hot tub experience will be enhanced many times around.
Why does a new hot tub need more chlorine?
New hot tubs need a higher-than-usual amount of chlorine when they are first set up because the water has not been circulated through them yet. Chlorine reacts with organics in the pipes to create compounds called trihalomethanes, which can make you sick if too many build up in your system.
Hot tub starter kits
When adding chemicals to hot tub the first time, these convenient packs of chemicals and accessories get you started with your hot tub when you purchase it. The Hot Tub Things Starter Kit comes complete with all the chemicals you will need and a “Frog” which is a chemical dispenser that flips over when it needs refilling.
How often to add chlorine to a hot tub?
A common amount of chlorine to add to a hot tub is about one teaspoon of granules per 100 gallons. Of course, this depends on what type of chlorine granules, tablet, or liquid you are using.
How to add chlorine to a hot tub
The first step is to test your hot tub water. Test the chlorine level of the water with a kit that you can buy at your local pool or spa supply store.
Why add chlorine to hot tub water?
Chlorine is the most common chemical used in a hot tub, and it’s added for disinfectant purposes.
What does it mean to shock hot tub water?
A shock is adding a higher dose of a chemical, usually one that contains chlorine or non-chlorine sanitizer, to kill anything in the water. It can also be called oxidizing. It removes organic contaminants and removes what’s leftover (chloramines) when chlorine kills bacteria.
Hot Tub Maintenance Course
I bought this course some months after I bought my first hot tub and was struggling with maintaining it. It was money very well spent and it has paid for itself many times over the years.