What is the size of a fuel line?
Centerline Length (ft): 25 Foot Length (ft): 25 Foot Material: Nitrile Rubber (NBR) Type: Fuel Line, PCV, EEC Hose Vacuum Rating (in/Hg): 10 Inch/Hg Length (m): 7.62m This product is universal and applies to all vehicles.
What kind of hose do you use for fuel lines?
Multi-purpose hose for use on fuel lines, PCV and EEC systems, and for fuel return hose connections on diesel fuel injection systems. Approved for use with leaded and unleaded gasoline, diesel and gasoline blends of ethanol (E85), methanol and ethers.
What is the size of a fuel line vacuum hose?
Type: Fuel Line, PCV, EEC Hose Vacuum Rating (in/Hg): 10 Inch/Hg Length (m): 7.62m This product is universal and applies to all vehicles. Multi-purpose hose for use on return fuel lines, PCV and EEC systems, and for fuel return hose connections on diesel fuel injection systems.
Can metal tubing handle fluid pressure in fuel lines?
Some older automobiles rely extensively on metal tubing for fluid-transfer applications, such as in fuel lines. While metal tubes can handle fluid pressure well, they have some important drawbacks.
Can you use rubber line for fuel line?
Standard rubber vacuum or heater hose should never be used in fuel applications. The hose will deteriorate from the inside out and can plug fuel filters and carburetors with rubber debris, long before it springs an external leak.
What type of rubber is used for fuel lines?
PTFE Lined Hose is the best soft hose you can use and generally has a braided stainless or braided nylon exterior. The PTFE liner blocks fuel vapors and slows the degradation process. PTFE Braided Hoses require Special Fittings.
Can you splice a fuel line with rubber hose?
The issue with rubber hose is that it will seep fuel if the outside of the steel line is rusty or has a rough uneven surface. Find a clean area with minimal rust. If you can flare the end, the connection with the hose will be more secure. Use the more expensive fuel injection clamps.
Can you use EPDM hose for fuel?
High-temperature tolerance— between 150°C (302°F) and 204°C (400°F) in water or steam)—makes EPDM an excellent steam hose, and it is also a great choice for conveying low and high pH fluid. However, EPDM is not oil resistant—thus unsuitable for fuel transfer hose—and can also be very costly.
What is best material for fuel line?
The best fuel line material depends on your needs. However, the best material for fuel lines is polytetrafluoroethylene or PTFE. PTFE fuel line is made of plastic material specifically known as Teflon. This fuel line material is impervious is resistant to the degenerative fuel effects which could form vapor barriers.
What is the best material for fuel hose?
PTFEThe best solution is a material called PTFE. That stands for polytetrafluoroethylene—a plastic material that is best known as Teflon in one specific variation. This material is impervious to the degenerative effects of fuel that also creates a vapor barrier so fuel vapors cannot leak past.
How long do rubber fuel hoses last?
At vw-resource.com he recommends replacing it every 5 years. rubber line about every five years.
Can you replace metal gas line with rubber?
Yes, you can, but there are some hazards/risks involved with using rubber fuel line. Sealing is a problem when you don't use hose fittings. Just slipping the hose on steel tube is asking for leaks, many times they are not visible. I recommend using double clamps and Hylomar sealant when not using hose fittings.
How do you fix a hole in a rubber fuel line?
When a leak is found in the rubber fuel line, no amount of duct tape, glue or sealant can fix it properly. This is due to the temperature and pressure of the fuel that runs through the line. The only way to properly repair a rubber fuel line is by replacing parts of the rubber hose, or the entire hose itself.
Is silicone rubber gasoline resistant?
Will silicone hold up to gasoline? No, Ultra Blue® is a silicone-based product, that will offer a good seal, and has good resistance to oil and coolant, however, silicones are not recommended for use in a gasoline environment. The gasoline will attack the product.
Can silicone tubing be used for fuel line?
One of the things we find gets asked often is can your silicone hoses for used for fuel? The simple answer is no, standard silicone hoses are porous and therefore not suitable for oil or fuel.
Is silicone hose fuel rated?
Can you use silicone hoses for fuel hoses? Well standard silicone hoses are porous and therefore not suitable for oil or fuel. There are flurosilicone liners, which are specially formulated to prevent oil from penetrating the wall but we would not recommend these for Fuel lines, or heavy use of Fuel Filling.
Detailed Description
Multi-purpose hose for use on return fuel lines, PCV and EEC systems, and for fuel return hose connections on diesel fuel injection systems. Approved for use with leaded and unleaded gasoline, diesel and gasoline blends of ethanol (E85), methanol and ethers (up to the legal limits allowed by the EPA).
Brand Information
For the past century Gates has been powering progress as one of the worlds leading parts manufacturers in the automotive industry, working with virtually every Original Equipment Manufacturer worldwide to design products for new vehicles as they are being developed.
Dorman OE Solutions Metal Fuel Lines
When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
Dorman OE Solutions Rubber Fuel Lines
When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
Dorman OE Solutions Nylon Fuel Line
When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
Dorman OE Solutions Metal Fuel Lines
When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
Dorman OE Solutions Metal Fuel Line
When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
Dorman OE Solutions Rubber Fuel Lines
When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
Dorman OE Solutions Rubber Fuel Line
When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
What is the outer layer of a hose?
The outer layer is designed to protect the hose from external damage and environmental factors. Under the hood, this layer resists heat from the engine, road chemicals that may spray up from the highway and other elements. The hose's inner layer is specifically created to resist the type of liquid being transported.
Why are rubber hoses so popular?
Rubber hoses are popular in automotive engineering due to their flexibility and relatively small size. You can shift them around to accommodate new components, and pushing them briefly out of the way when performing vehicle repairs is easy as well. The best rubber hoses for cars and trucks aren't actually made entirely of rubber.