5 16 metal fuel line

by Lyric Mayer Published 3 years ago Updated 3 years ago

What are the different types of metal fuel lines?

Metal Fuel Line. 1 Dorman Metal Fuel Line 819-846. Part # 819-846. SKU # 1043364. 2 Russell 639480 Natural Aluminum Metal Fuel Line. 3 Dorman Metal Fuel Line 819-816. 4 Russell Aluminum 3/8in 25ft Fuel Line. 5 Russell Blue 3/8in Aluminum Metal Fuel Line. More items

What is the size of a fuel line connector?

Fuel Line Connector, 5/16 in. Size, Straight, Steel, Natural, Hose Barb, Each Fuel Line Connectors, Double Bead Line Style, 45 degree, 3/8 in. Connector Size, Plastic, Black, Pair Fuel Line Connectors, 5/16 in. Size, Straight, Quick-connect, Straight, Plastic, Black, Pair

What size return line do you use for fuel lines?

Rolled out a over 8 foot long return line on the first attempt, so it can be worked without kinking bends. I bought a 25’ roll of zinc plated steel line. I used it for fuel lines. I also bought some fittings.

What is the fuel line on a car?

Touch device users, explore by touch or with swipe gestures. The fuel line is the part of the fuel system that allows fuel to be delivered from the fuel tank to the engine. There are sections of metal hard line and sections of rubber or nylon for flex.

What is the best metal for fuel line?

Most cars come from the factory with Metal Lines because they hold up better than any soft material. They are usually made from stainless, aluminum or coated steel tube. Metal is the best material for fuel lines. However, it can be difficult to fabricate.

What is the best material for fuel lines?

The best fuel line material depends on your needs. However, the best material for fuel lines is polytetrafluoroethylene or PTFE. PTFE fuel line is made of plastic material specifically known as Teflon. This fuel line material is impervious is resistant to the degenerative fuel effects which could form vapor barriers.

How much horsepower can a 5/16 fuel line handle?

If you're just cruising around with a carbed SBC, you'll probably be fine with a 5/16" line up to about 500 HP because you'll never tax the system enough to starve the motor of fuel.

Which is bigger 5/16 fuel line or 3 8?

The 5/16″ fuel line is actually perfect for smaller outboards. Being a little smaller than the 3/8″ hose, it works great for little kicker motors, and sailboat outboard engines.

What is the best type of fuel line?

The best solution is a material called PTFE. That stands for polytetrafluoroethylene—a plastic material that is best known as Teflon in one specific variation. This material is impervious to the degenerative effects of fuel that also creates a vapor barrier so fuel vapors cannot leak past.

What tubing is good for gasoline?

Fuel line is a petroleum-resistant nitrile tube with a covering that resists weathering, ozone and heat and can be used for ethanol-laced fuels and diesel fuel.

Is 3/8 fuel line big enough?

A 3/8”id fuel line can easily support 600 HP given sufficient “pump head”! Given a big enough pump a 3/8” steel line could support 1000 HP. The simple way to know is to install an electronic fuel pressure gauge. If the pressure falls as the engine RPM's go up you need more pump head.

What size fuel return line should I use?

The Fuel Return Line should be at least the same size, or one size larger than the supply. Make sure there are no sharp bends or kinks. The return line should direct fuel close to the bottom of the tank and away from the pickup.

Does fuel line size affect pressure?

Shows the relationship between measured pressure drop as a function of flow rate, for four different fuel lines (two different sizes at two different lengths). Every fuel line experiences pressure loss depending on fuel line length, and fuel flow rate.

What is the outside diameter of 5/16 fuel line?

Universal Fuel Line - 3/16" ID x 5/16" OD, Sold by the FootInside Diameter3/16 InchOutside Diameter5/16 InchTypeFuel Tank Line

What size is standard fuel line?

The sizes typically used in fuel systems are AN6 / Dash 6 / -6, which equates to a thread measuring 9/16” x 18 (threads per inch) with a hose bore around 3/8”, and AN8 / Dash 8 / -8 which has a thread measuring 3/4” x 16 (threads per inch) with a hose bore of around 1/2”.

How are metal fuel lines measured?

Place the top of a 1/4-inch wrench with an open end over the fuel line. Slide it carefully over the line so that it fits snugly against the tubing. Read the wrench's measurements to determine the diameter of the fuel line. Place a caliper over the fuel line if the wrench did not give an accurate reading.

Dorman 800-081 - Dorman Fuel Line Connectors

Fuel Line Connectors, Quick Connect, 90 degree, 5/16 in. Connector Size, Plastic, Black, Pair

Dorman 800-116 - Dorman Fuel Line Connectors

Fuel Line Connectors, 5/16 in. Size, Straight, Hose Barb, Plastic, White, 5/16 in. Tubing Size, Pair

Dorman 800-123 - Dorman Fuel Line Connectors

Fuel Line Connectors, Double Bead Line Style, 90 degree, 5/16 in. Connector Size, Plastic, Black, Pair

Dorman 800-130 - Dorman Fuel Line Connectors

Fitting, Fuel Line Connector, Straight, 11mm Male Spring Lock, 5/16 in. Hose Barb, Each

Dorman 800-091 - Dorman Fuel Line Connectors

Fuel Line Connectors, Quick Connect, 90 degree, 3/8 in. Connector Size, Plastic, Black, Pair

Dorman 492-032.1 - Dorman Fuel Line Connectors

Fuel Line Connector, 5/16 in. Size, Straight, Steel, Natural, Hose Barb, Each

Dorman 800-134 - Dorman Fuel Line Connectors

Fuel Line Connectors, Double Bead Line Style, 45 degree, 3/8 in. Connector Size, Plastic, Black, Pair