What is the difference between a 3/8 and 5/16 fuel line?
Obviously, the difference between the two fuel lines is one is smaller than the other. We get it. But there is a little more to it than that. The 5/16″ fuel line is actually perfect for smaller outboards. Being a little smaller than the 3/8″ hose, it works great for little kicker motors, and sailboat outboard engines.
Can an outboard drink fuel through the 5/16″ line?
It can drink the fuel through the 5/16″ line, but for how long is the real question! Larger outboards, 150 and above, require more fuel to run at higher RPM’s.
What makes a good marine fuel line?
Marine fuel lines should meet certain USCG regulations that take into account the permeability of hoses and some other criteria. The point is, most of these parts can pass the vapors of hydrocarbons.
Where can I buy fuel line parts for my Boat?
When any boat fuel line component needs to be replaced, shop at Wholesale Marine. We stock everything from marine fuel hoses, siphons, valves, withdraw assemblies, clamps, tank vents, and marine fuel connectors. Contact us or use our Parts Finder online to locate the correct parts.
Is marine fuel line different?
As I understand, one big difference is better UV resistance in the marine fuel line. Automotive fuel line gets a virtually no exposure to direct daylight, so little to no need for UV protection. Another possible difference is better flame resistance in the marine fuel line.
What is marine grade fuel hose?
These are specifically designed and branded for use in supplying fuel to motors in boats or marine vessels. USCG Type A1 hoses are designed for fuel feed applications where the fuel is constantly in the hose, whereas Type A2 hoses are designed for fuel fill type hoses only.
What size is 5/16 fuel line?
Size: 5/16" I.D. x 9/16" O.D. Working Pressure: 50 P.S.I.
Which fuel line is bigger 3/8 or 5 16?
The 5/16″ fuel line is actually perfect for smaller outboards. Being a little smaller than the 3/8″ hose, it works great for little kicker motors, and sailboat outboard engines. Being smaller allows it to go easily into a smaller rigging tube, depending on the application.
What is USCG approved fuel line?
MPI Fuel Hose USCG Type A This premium quality fire-retardant fuel hose meets or exceeds all requirements of new ISO 7840 and SAE J5127 standards required by USCG, ABYC and NMMA. Inner tube material provides extraordinary resistance to gasoline, diesel and alcohol-enhanced fuels.
How long does marine fuel line last?
The EPA defines useful life as 10 years for boat fuel system components and five years for PWC fuel systems.
How much horsepower will a 5/16 fuel line support?
If you're just cruising around with a carbed SBC, you'll probably be fine with a 5/16" line up to about 500 HP because you'll never tax the system enough to starve the motor of fuel.
What size is 3/8 fuel line?
Understanding Fuel Line Fittings: Straight Thread (and AN) vs. Tapered ThreadAN SizeTube or Hose ODTube or Hose ID-4¼”.172”-55/16”.062”-63/8”.297”-81/2”.391”9 more rows•May 6, 2015
Is 3/8 fuel line big enough?
A 3/8”id fuel line can easily support 600 HP given sufficient “pump head”! Given a big enough pump a 3/8” steel line could support 1000 HP. The simple way to know is to install an electronic fuel pressure gauge. If the pressure falls as the engine RPM's go up you need more pump head.
What size is outboard fuel line?
Mercury/Mariner O/B Standard Fuel Line Assembly, 6' x 3/8"Compatibility93806BLP7Inside Diameter3/8 InchOutside Diameter11/16 InchMaximum Continuous Length6 FootTypeFuel Tank Lines
What size are fuel lines?
The sizes typically used in fuel systems are AN6 / Dash 6 / -6, which equates to a thread measuring 9/16” x 18 (threads per inch) with a hose bore around 3/8”, and AN8 / Dash 8 / -8 which has a thread measuring 3/4” x 16 (threads per inch) with a hose bore of around 1/2”.
Can a fuel line be to long?
Your fuel line should be about the same. Too long and your engine may have trouble scavenging for fuel. This makes it difficult to tune the engine.
Special offers and product promotions
Amazon Business: Make the most of your Amazon Business account with exclusive tools and savings. Login now
Have a question?
There was a problem completing your request. Please try your search again later.
Product description
Fuel Line Assembly 5/16" 8mm Fuel Gas Line Hose for Marine Outboard Boat Motor RVs Fuel Assembly ith Primer Bulb Steel Hose Clamps with Primer Bulb Steel Hose Clamps 6FT fuel line
Why are boat fuel lines and hoses important?
Boat fuel lines and hoses in any boat’s fuel systems are essential in ensuring safe boat operation and trouble-free performance. High-quality fuel assembly components must be securely attached to prevent potentially dangerous boat fuel lines leaks. Find the top names in boat fuel lines and hoses including Attwood , Tempo Marine , Moeller Marine , Sierra Marine Products , MPI , Bennett Marine, and Whitecap Industries. It is vital to understand marine fuel hose-related issues to assure these components are fully functional and safe or if these components are in need of replacement.
What size fuel fill hose for Sierra Shields?
Sierra Shields Fuel Fill Hose 1-1/2" Since 2012, marine fuel filler hoses must meet stricter standards than before. If you are replacing your recreational craft’s fuel fill hose it is essential to have a fill hose that resists the detrimental and...
How to check if a fuel tank connector is suction?
Check for suction at the tank end by covering the hose end with your finger.
What is the Moeller 033410-10?
Moeller 033410-10 OMC/Johnson/Evinrude Tank or Engine Fuel Line Connector 5/16" Moeller Marine female engine/tank connector that attaches to the fuel hose on the tank side of the engine side. 5/16" Barb Female Fuel Line Engine and Tank...
What is the part number for Trident Marine?
Boat part number 1048150 is a new, off the roll, increment of 5/16" ID fuel hose from Trident Marine, part number 365-0560 .
What is Trident series 365?
Trident series 365 hose is built with the best fuel and fire resistant formulation, this 2-spiral reinforced hose features a unique "Barrier Liner" on the inside surface of tube, so fuel is not in direct contact with the rubber.
What is the difference between a 5/16 and 3/8 fuel line?
We get it. But there is a little more to it than that. The 5/16″ fuel line is actually perfect for smaller outboards. Being a little smaller than the 3/8″ hose, it works great for little kicker motors, and sailboat outboard engines.
What fuel line do you need for a Honda engine?
The general rule of thumb still stands regardless of what manufacturer engine you have! Whether it be Honda, Mercury, Yamaha, Suzuki, Tohatsu, Nissan, or Johnson/Evinrude. Any engine that is above the 115 HP requires you to use a 3/8″ fuel line! The basic functionality of a combustion engine and the fuel demand for the horsepower is the same!
What is the A2 hose used for?
A2 Hoses: Are used for the fuel tank vent hose below the deck. They aren’t designed to have fuel sitting in the hose but do have a fire-resistant covering on the outside of the hose. B1 Hoses: Are used for feeding fuel from the boat fuel tank to the fuel filter bracket BUT ABOVE THE DECK OR NOT ENCLOSED!
What is the difference between a B2 and A1 hose?
They are basically the same as the A1 hoses but do not have the fire-resistant covering that is on the outside of the hose. B2 Hoses: Are used for the fuel tank vent hose BUT ABOVE THE DECK OR NOT ENCLOSED! Basically the same as the A2 hose but without the fire-resistant covering on the outside of the hose.
Why is my fuel pump running lean?
If the fuel pump is sucking in air every time it tries to get fuel, it will aerate the fuel and run the engine lean. Giving you all kinds of different problems!
How to know what fuel line is on a combustion engine?
The basic functionality of a combustion engine and the fuel demand for the horsepower is the same! You will also know what fuel line is supposed to be there by looking at the hook up on the engine. Wherever you hook up the fuel line on the engine there will be a hose barb. If it is a 5/16″ or a 3/8″ hose barb, that is what you should use.
Why is it important to have a fuel line installed?
Going back to the straw theory, having the correct fuel line installed will help ensure the proper fuel consumption for the engine. Thus, keeping up and even prolonging the life of the engine. You don’t want to cause premature failure of the engine or any of the components that are in the fuel system.
What is a 368 series fuel line?
368 Series Type A2 Fuel Line by Shields Hose®. Shields Low Permeation Marine Fuel Hose has a plastic barrier veneer with an NBR outer layer tube to prevent permeation. This polyester reinforced hose complies with EPA and CARB very low...
What size fuel line for Silverado 3000?
Silverado 3000 5/8" x 50' Type B2 Fuel Line by Shields Hose®. What can be more fun and rewarding than boating on the open waters? This is an excellent solution for your boating needs. This product is great for use in all marine...
What is fuel hose for BRP?
Fuel Hose for BRP Engines by Attwood®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by Attwood will last a lifetime....
What is fuel hose for Johnson?
Fuel Hose for Johnson/Evinrude Engines by Scepter®. Low permeation hose meets all EPA and CARB standards as well as 40 CFR Low Emissions requirements. Provides maximum fuel flow and superior engine performance, fully compatible with...