How much does a 4x4x10 treated post weigh?
A 4 in. x 4 in. x 10 ft. timber can weigh approximately 31 pounds when it is completely dry (no moisture content) and weigh between 41 and 48.5 pounds when the timber is new pressure treated for above or below ground.
How long is a 4x4 piece of wood?
Menards and Home Depot stand accused of deceiving the lumber-buying public, specifically, buyers of 4x4 boards, the big brother to the ubiquitous 2x4. The alleged deception: The retailers market and sell the hefty lumber as 4x4s without specifying that the boards actually measure 3½ inches by 3½ inches.21-Jun-2017
Can you paint pressure treated lumber?
Yes, you can paint or stain pressure-treated wood, but for a long-lasting and great-looking finish evaluate the wood's moisture content first, then use the correct paint and primer.03-Sept-2019
Can you stain pressure treated wood?
Not only can you stain treated wood, painting and staining pressure-treated wood is actually good for your new deck. Although the treated wood doesn't need to be protected against rot, staining it will help reduce surface cracking.01-Jul-2021
Is a 4x4 actually 4x4?
While it is true that the actual size of a 4 x 4 board is 3 ½ x 3 ½, that is not a deceptive practice in my opinion. It is well known that lumber is sold based on nominal sizes, and the actual size of the boards is smaller than the nominal size.25-Jun-2017
Why is it called 5 4 board?
It simply refers to how many 1/4-inches thick the rough stock is. For example, 4/4 (read out loud as four-quarters) is 1-in. thick in the rough. 5/4 is 1-1/4-in.15-Jun-2021
Is it better to stain or paint pressure treated wood?
For similar reasons, wet lumber can hinder how well paint adheres to the wood, but the added problem of the preservatives in pressure-treated wood makes it difficult for the paint to bond; this is why it's advisable to stain pressure-treated wood instead of paint, as painting requires additional preparation.22-Feb-2022
What happens if you paint pressure treated wood too soon?
Your Board Will Warp If you paint treated lumber before it's dry, you cause the non-painted side to dry faster. And when one side dries faster than the other, you get warping. You're better off waiting until the wood is dry; otherwise, you'll end up with warped wood, peeling paint, and a big project.16-Jul-2021
How soon can you stain or paint pressure treated wood?
How long do you have to wait to stain pressure treated wood? Wait until the wood is completely dry. Depending on climate conditions, pressure-treated wood can take anywhere from a few weeks to a few months.28-May-2021
Do you need to sand pressure treated wood before staining?
All wood, except manufactured products like composite wood — even pressure-treated lumber — need to be sanded and stained. If you want it to last, you have to put in the time and some elbow grease.23-May-2015
What's the best stain for pressure treated wood?
Top 6 Stains For Pressure Treated WoodDEFY Extreme Semi-Transparent Cedar-Tone Exterior Wood Stain.Thompsons Waterseal Semi-Transparent Waterproofing Stain.Liquid Rubber Color Waterproof Sealant.Cabot Semi-Solid Deck & Siding Stain.Ready Seal Exterior Stain And Sealer For Wood.Olympic Elite Woodland Oil Stain.
What is the best sealant for pressure treated wood?
Best Deck Sealers for Pressure-treated WoodReady Seal 520 Exterior Stain and Sealer for Wood. ... SEAL-ONCE Nano+Poly Ready Mix Penetrating Wood Sealer. ... #1 Deck Premium Semi-Transparent Wood Stain for Decks. ... Thompsons Waterseal Solid Waterproofing Stain. ... Eco Advance Wood Siloxane Waterproofer Concentrate.More items...•15-Sept-2021